scholarly journals Investigating the Mechanism of Uranium Removal by Zerovalent Iron

2005 ◽  
Vol 2 (3) ◽  
pp. 235 ◽  
Author(s):  
Chicgoua Noubactep ◽  
Günther Meinrath ◽  
Broder J. Merkel
Keyword(s):  
Groundwater Remediation ◽  
Cost Effective ◽  
Corrosion Products ◽  
Zerovalent Iron ◽  
Iron Corrosion ◽  
Reactive Material ◽  
Test Methodology ◽  
Uranium Removal ◽  
Cost Effective Method ◽  
Or In Agriculture

Environmental Context.Groundwater is the water that fills the spaces between sand, soil, and rock below the water table. It discharges into ecologically sensitive wetlands and is used as drinking water or in agriculture and industry. Inappropriate waste disposal and poor land management can contaminate groundwater and may minimize its use for decades. The common method for pumping contaminated groundwater to the surface for treatment is costly and labour intensive. Zerovalent iron is a new, more cost-effective method of groundwater remediation. Abstract. Zerovalent iron (ZVI) has been proposed as a reactive material in permeable in situ walls for groundwater contaminated by metal pollutants. For such pollutants that interact with corrosion products, the determination of the actual mechanism of their removal is very important to predict their stability in the long term. From a study of the effects of pyrite (FeS2) and manganese nodules (MnO2) on the uranium removal potential of a selected ZVI material, a test methodology (FeS2–MnO2 method) is suggested to follow the pathway of contaminant removal by ZVI materials. An interpretation of the removal potential of ZVI for uranium in the presence of both additives corroborates coprecipitation with iron corrosion products as the initial removal mechanism for uranium.

Removal of Arsenate from Aqueous Solution Using Nanoscale Iron Particles

2006 ◽  
Vol 41 (2) ◽  
pp. 210-215 ◽  
Author(s):  
Ching Yuan ◽  
Hsing-Lung Lien
Keyword(s):  
Adsorption Capacity ◽  
Zero Point ◽  
Xrd Analysis ◽  
Corrosion Products ◽  
Zerovalent Iron ◽  
Bet Surface Area ◽  
Maximum Adsorption Capacity ◽  
Iron Particles ◽  
Iron Corrosion ◽  
Nanoscale Iron Particles

Abstract Removal of As(V) using nanoscale iron particles was examined in batch reactors. Nanoscale iron particles, utilizing zerovalent iron with a diameter less than 100 nm as reactive materials, have been demonstrated to effectively remediate a wide variety of common environmental contaminants. In this study, characterization of nanoscale iron particles and their corrosion products was conducted using SEM-EDX, XRD, BET surface area analyzer and Laser Zee Meter. SEM-EDX results indicated adsorption of arsenic onto the iron surface, and XRD analysis found the formation of iron corrosion products including lepidocrocite, magnetite and/or maghemite at a reaction period of 7 d. Measurements of zeta potential revealed that the nanoscale iron particles have a zero point of charge at pH 4.4. Increasing adsorption amounts of arsenic with decreasing pH can therefore be attributed to the positive surface charge of the particles at lower pH. The maximum adsorption capacity of nanoscale iron particles determined by the Langmuir equation was about 38.2 mg/g. Normalization of the adsorption capacity to specific surface areas provides insight into the importance of iron types and the contact time of reactions in influencing arsenic uptake.

Arsenic(III) and Arsenic(V) Reactions with Zerovalent Iron Corrosion Products

2002 ◽  
Vol 36 (24) ◽  
pp. 5455-5461 ◽  
Author(s):  
Bruce A. Manning ◽  
Mathew L. Hunt ◽  
Christopher Amrhein ◽  
Jory A. Yarmoff
Keyword(s):  
Corrosion Products ◽  
Zerovalent Iron ◽  
Iron Corrosion

scholarly journals Testing the Suitability of Zerovalent Iron Materials for Reactive Walls

2005 ◽  
Vol 2 (1) ◽  
pp. 71 ◽  
Author(s):  
Chicgoua Noubactep ◽  
Günther Meinrath ◽  
Peter Dietrich ◽  
Martin Sauter ◽  
B. J. Merkel
Keyword(s):  
Groundwater Remediation ◽  
Corrosion Behaviour ◽  
Low Cost ◽  
Permeable Reactive Barriers ◽  
Zerovalent Iron ◽  
Reactive Material ◽  
Reactive Additives ◽  
Application Specific

Environmental Context. Groundwater remediation is generally a costly, long-term process. In situ remediation using permeable reactive barriers, through which the groundwaters pass, is a potential solution. For redox-sensitive contaminants in groundwater, a metallic iron barrier (zerovalent iron, ZVI) can immobilize or degrade these dissolved pollutants. Scrap iron materials are a low-cost ZVI material but, because of the wide variation of scrap metal compositions, testing methods for characterizing the corrosion behaviour need to be developed. Abstract. Zerovalent iron (ZVI) has been proposed as reactive material in permeable in situ walls for contaminated groundwater. An economically feasible ZVI-based reactive wall requires cheap but efficient iron materials. From an uranium treatability study and results of iron dissolution in 0.002 M EDTA by five selected ZVI materials, it is shown that current research and field implementation is not based on a rational selection of application-specific iron metal sources. An experimental procedure is proposed which could enable a better material characterization. This procedure consists of mixing ZVI materials and reactive additives, including contaminant releasing materials (CRMs), in long-term batch experiments and characterizing the contaminant concentration over the time.

CAD Of Anticorrosive Protection Of Steel Structures

2019 ◽  
pp. 18-23
Keyword(s):  
Protective Coating ◽  
Computer Aided Design ◽  
Steel Structures ◽  
Cost Effective ◽  
Operating Conditions ◽  
Computational Tool ◽  
Protection Method ◽  
Cost Effective Method ◽  
The Cost ◽  
Aided Design

The choice of cost-effective method of anticorrosive protection of steel structures is an urgent and time consuming task, considering the significant number of protection ways, differing from each other in the complex of technological, physical, chemical and economic characteristics. To reduce the complexity of solving this problem, the author proposes a computational tool that can be considered as a subsystem of computer-aided design and used at the stage of variant and detailed design of steel structures. As a criterion of the effectiveness of the anti-corrosion protection method, the cost of the protective coating during the service life is accepted. The analysis of existing methods of steel protection against corrosion is performed, the possibility of their use for the protection of the most common steel structures is established, as well as the estimated period of effective operation of the coating. The developed computational tool makes it possible to choose the best method of protection of steel structures against corrosion, taking into account the operating conditions of the protected structure and the possibility of using a protective coating.

Monitoring effluent quality in hypertrophic wastewater reservoirs using remote sensing

1996 ◽  
Vol 33 (8) ◽  
pp. 23-29 ◽  
Author(s):  
I. Dor ◽  
N. Ben-Yosef
Keyword(s):  
Water Quality ◽  
Theoretical Model ◽  
Principal Component ◽  
Cost Effective ◽  
Operational Parameters ◽  
Effluent Quality ◽  
Optical Images ◽  
Routine Monitoring ◽  
Cost Effective Method ◽  
Wastewater Quality

About one hundred and fifty wastewater reservoirs store effluents for irrigation in Israel. Effluent qualities differ according to the inflowing wastewater quality, the degree of pretreatment and the operational parameters. Certain aspects of water quality like concentration of organic matter, suspended solids and chlorophyll are significantly correlated with the water column transparency and colour. Accordingly optical images of the reservoirs obtained from the SPOT satellite demonstrate pronounced differences correlated with the water quality. The analysis of satellite multispectral images is based on a theoretical model. The model calculates, using the radiation transfer equation, the volume reflectance of the water body. Satellite images of 99 reservoirs were analyzed in the chromacity space in order to classify them according to water quality. Principal Component Analysis backed by the theoretical model increases the method sensitivity. Further elaboration of this approach will lead to the establishment of a time and cost effective method for the routine monitoring of these hypertrophic wastewater reservoirs.

A Cost-Effective Method to Prepare Pure Vildagliptin

2013 ◽  
Vol 10 (3) ◽  
pp. 159-163 ◽  
Author(s):  
Jun Peng ◽  
Yue Feng ◽  
Zhu Tao ◽  
Yingjie Chen ◽  
Xiangnan Hu
Keyword(s):  
Cost Effective ◽  
Cost Effective Method

scholarly journals Computer-supported Detection of M-Components and Evaluation of Immunoglobulins after Capillary Electrophoresis

2001 ◽  
Vol 47 (1) ◽  
pp. 110-117 ◽  
Author(s):  
Magnus Jonsson ◽  
Joyce Carlson ◽  
Jan-Olof Jeppsson ◽  
Per Simonsson
Keyword(s):  
Capillary Electrophoresis ◽  
Decision Support ◽  
Protein Separation ◽  
Serum Proteins ◽  
Cost Effective ◽  
Clinical Samples ◽  
Serum Samples ◽  
Computerized Decision Support ◽  
Cost Effective Method ◽  
Mathematical Algorithms

Abstract Background: Electrophoresis of serum samples allows detection of monoclonal gammopathies indicative of multiple myeloma, Waldenström macroglobulinemia, monoclonal gammopathy of undetermined significance, and amyloidosis. Present methods of high-resolution agarose gel electrophoresis (HRAGE) and immunofixation electrophoresis (IFE) are manual and labor-intensive. Capillary zone electrophoresis (CZE) allows rapid automated protein separation and produces digital absorbance data, appropriate as input for a computerized decision support system. Methods: Using the Beckman Paragon CZE 2000 instrument, we analyzed 711 routine clinical samples, including 95 monoclonal components (MCs) and 9 cases of Bence Jones myeloma, in both the CZE and HRAGE systems. Mathematical algorithms developed for the detection of monoclonal immunoglobulins (MCs) in the γ- and β-regions of the electropherogram were tested on the entire material. Additional algorithms evaluating oligoclonality and polyclonal concentrations of immunoglobulins were also tested. Results: CZE electropherograms corresponded well with HRAGE. Only one IgG MC of 1 g/L, visible on HRAGE, was not visible after CZE. Algorithms detected 94 of 95 MCs (98.9%) and 100% of those visible after CZE. Of 607 samples lacking an MC on HRAGE, only 3 were identified by the algorithms (specificity, 99%). Algorithms evaluating total gammaglobulinemia and oligoclonality also identified several cases of Bence Jones myeloma. Conclusions: The use of capillary electrophoresis provides a modern, rapid, and cost-effective method of analyzing serum proteins. The additional option of computerized decision support, which provides rapid and standardized interpretations, should increase the clinical availability and usefulness of protein analyses in the future.

scholarly journals CO$$_{2}$$ Convection in Hydrocarbon Under Flowing Conditions

2021 ◽  
Author(s):  
Trine S. Mykkeltvedt ◽  
Sarah E. Gasda ◽  
Tor Harald Sandve
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Flow Behavior ◽  
Cost Effective ◽  
Fine Grid ◽  
Cost Effective Method ◽  
Gravity Effects ◽  
Petroleum Resources ◽  
Nearby Point ◽  
Diffusive Processes

AbstractCarbon-neutral oil production is one way to improve the sustainability of petroleum resources. The emissions from produced hydrocarbons can be offset by injecting capture CO$$_{2}$$ 2 from a nearby point source into a saline aquifer for storage or a producing oil reservoir. The latter is referred to as enhanced oil recovery (EOR) and would enhance the economic viability of CO$$_{2}$$ 2 sequestration. The injected CO$$_{2}$$ 2 will interact with the oil and cause it to flow more freely within the reservoir. Consequently, the overall recovery of oil from the reservoir will increase. This enhanced oil recovery (EOR) technique is perceived as the most cost-effective method for disposing captured CO$$_{2}$$ 2 emissions and has been performed for many decades with the focus on oil recovery. The interaction between existing oil and injected CO$$_{2}$$ 2 needs to be fully understood to effectively manage CO$$_{2}$$ 2 migration and storage efficiency. When CO$$_{2}$$ 2 and oil mix in a fully miscible setting, the density can change non-linearly and cause density instabilities. These instabilities involve complex convective-diffusive processes, which are hard to model and simulate. The interactions occur at the sub-centimeter scale, and it is important to understand its implications for the field scale migration of CO$$_{2}$$ 2 and oil. In this work, we simulate gravity effects, namely gravity override and convective mixing, during miscible displacement of CO$$_{2}$$ 2 and oil. The flow behavior due to the competition between viscous and gravity effects is complex, and can only be accurately simulated with a very fine grid. We demonstrate that convection occurs rapidly, and has a strong effect on breakthrough of CO$$_{2}$$ 2 at the outlet. This work for the first time quantifies these effects for a simple system under realistic conditions.

Sign in / Sign up

Export Citation Format

Share Document