Relationship between sire estimated breeding values and the meat and eating quality of meat from their progeny grown on two planes of nutrition

2005 ◽  
Vol 45 (5) ◽  
pp. 525 ◽  
Author(s):  
D. L. Hopkins ◽  
R. S. Hegarty ◽  
T. C. Farrell
Keyword(s):  
Meat Quality ◽  
Shear Force ◽  
Best Practice ◽  
Intramuscular Fat ◽  
Eating Quality ◽  
Quality Traits ◽  
Breeding Values ◽  
Meat Quality Traits ◽  
Estimated Breeding Values

The meat of 140 female lambs was examined. These lambs were sired by 9 Poll Dorset sires (3 selected for growth, 3 for muscling and 3 control) and fed either a low or high plane of nutrition from birth to slaughter. All carcasses were electrically stimulated and portions of M. longissimus thoracis et lumborum (loin) aged for 5 days before freezing. Subsequently, 10 consumers tested each portion for eating quality traits. A portion of the same muscle from the opposing side of the carcass was divided into 3 sections and aged for either 1, 3 or 5 days and then used to measure shear force (objective tenderness). Portions of the M. semimembranosus (topside) were also aged for 3 or 5 days and subjected to shear testing. Low plane animals produced tougher loins (based on shear force). As ultimate pH increased, shear force of the loin increased for low plane animals, while for high plane animals there was no such effect. This latter group had significantly lower ultimate pH values in all 3 muscles tested. Plane of nutrition had the greatest effect on topside shear force with low plane lambs producing tougher topsides. As ultimate pH increased, the topsides became tougher and as expected ageing improved the tenderness. There was no effect of sire EBVs (estimated breeding values) on shear force or objective meat quality traits apart from loin lightness which increased as the EBV for post-weaning weight (PWWT) increased and intramuscular fat in the loin which decreased as sire EBV for post-weaning muscle depth (PEMD) increased. Plane of nutrition did not have a significant effect on eating quality attributes as assessed by consumers. There was, however, an effect of sire EBV for muscling (PEMD) on tenderness, juiciness, flavour and overall liking, such that increased EBV led to decreased scores for the sensory traits. The findings suggest selection of sires for increasing PEMD will have a detrimental affect on the eating quality of their progeny, but this will not be reflected in shear force values or other objective meat quality traits apart from intramuscular fat. The effects of a low plane of nutrition on eating quality were minimal and largely controlled by the use of best practice processing, but were evident for a number of meat quality traits.

Genetics of flight time and other measures of temperament and their value as selection criteria for improving meat quality traits in tropically adapted breeds of beef cattle

2006 ◽  
Vol 57 (9) ◽  
pp. 1029 ◽  
Author(s):  
Meridy J. Kadel ◽  
David J. Johnston ◽  
Heather M. Burrow ◽  
Hans-U. Graser ◽  
Drewe M. Ferguson
Keyword(s):  
Meat Quality ◽  
Shear Force ◽  
Genetic Correlations ◽  
Flight Time ◽  
Flight Speed ◽  
Eating Quality ◽  
Quality Traits ◽  
Phenotypic Correlations ◽  
Meat Quality Traits ◽  
Speed Score

Flight time, an objective measure of temperament, was recorded in 3594 Brahman, Belmont Red, and Santa Gertrudis heifers and steers. Two subjective measures of temperament (crush score and flight speed score) were also available for over 2000 of these animals. Temperament measures were recorded post-weaning (average age 8 months) and again at the start of finishing (average age 19 months) on a subset of the animals. Nine meat quality traits were measured on these animals and included measures on 2 different muscles [M. longissimus thoracis et lumborum (LTL) and M. semitendinosus (ST)]. The heritability of flight time measured post-weaning and at the start of finishing was 0.30 and 0.34, respectively, with a repeatability of 0.46 across the measurement times. Heritabilities for scored temperament traits were 0.21, 0.19, and 0.15 for post-weaning flight speed score, post-weaning crush score, and start of finishing crush score, respectively. Genetic correlations across measurement times for flight time were 0.98 and 0.96 for crush score, indicating a strong underlying genetic basis of these temperament measures over time; however, the corresponding phenotypic correlations were lower (0.48 and 0.37, respectively). Longer flight times (i.e. better temperament) were genetically correlated with improved tenderness (i.e. lower shear force and higher tenderness scores), with genetic correlations of –0.42 and 0.33 between LTL shear force, and Meat Standards Australia (MSA) tenderness, respectively. Genetic correlations between post-weaning crush score and the same meat quality traits were 0.39 and –0.47, respectively. However, genetic and phenotypic correlations between measures of temperament and other meat quality traits were generally low, with the exception of crush scores with LTL Minolta a* value (–0.37 and –0.63 for post-weaning and start of finishing measurement time, respectively). Predicted correlated responses of –0.17 kg LTL shear force and 2.6 MSA tenderness points per generation were predicted based on the genetic parameter estimates and a recording regime of both flight time and crush scores. Selection based on the measures of temperament described in this study could be used to improve temperament itself and correlated improvements can also occur in meat tenderness and eating quality traits in tropically adapted breeds of cattle.

scholarly journals Genetics of meat quality and carcass traits and the impact of tenderstretching in two tropical beef genotypes

2009 ◽  
Vol 49 (6) ◽  
pp. 383 ◽  
Author(s):  
M. L. Wolcott ◽  
D. J. Johnston ◽  
S. A. Barwick ◽  
C. L. Iker ◽  
J. M. Thompson ◽  
...  
Keyword(s):  
Meat Quality ◽  
Shear Force ◽  
Carcass Traits ◽  
Intramuscular Fat ◽  
Quality Traits ◽  
Muscle Area ◽  
Live Animal ◽  
Eye Muscle ◽  
Meat Quality Traits ◽  
Lower Shear

Meat quality and carcass traits were measured for 2180 feedlot finished Brahman (BRAH) and Tropical Composite (TCOMP) steers to investigate genetic and non-genetic influences on shear force, and other meat quality traits. Genetic and phenotypic correlations were estimated between carcass and meat quality traits, and with live animal measurements collected in steers from weaning to feedlot exit, and their heifer half-sibs up to their first mating, which were managed in Australia’s tropical or subtropical environments. Left sides of carcasses were tenderstretched (hung by the aitch-bone) while right sides were conventionally hung (by the Achilles tendon). Tenderstretching reduced mean shear force by 1.04 kg, and phenotypic variance by 77% of that observed in conventionally hung sides. Genotype differences existed for carcass traits, with TCOMP carcasses significantly heavier, fatter, with greater eye muscle area, and lower retail beef yield than BRAH. TCOMP had lower shear force, and higher percent intramuscular fat. Meat quality and carcass traits were moderately heritable, with estimates for shear force and compression of 0.33 and 0.19 for BRAH and 0.32 and 0.20 for TCOMP respectively. In both genotypes, estimates of heritability for carcass traits (carcass weight, P8 and rib fat depths, eye muscle area and retail beef yield) were consistently moderate to high (0.21 to 0.56). Shear force and compression were genetically correlated with percent intramuscular fat (r g = –0.26 and –0.57, respectively), and meat colour (r g = –0.41 and –0.68, respectively). For TCOMP, lower shear force was genetically related to decreased carcass P8 fat depth (r g = 0.51). For BRAH steers and heifers measured at pasture, fatness traits and growth rates were genetically correlated with shear force, although the magnitude of these relationships varied with time of measurement. Net feed intake was significantly genetically correlated with carcass rib fat depth (r g = 0.49), eye muscle area (r g = –0.42) and retail beef yield (r g = –0.61). These results demonstrate that selection to improve production and carcass traits can impact meat quality traits in tropically adapted cattle, and that genotype specific evaluations will be necessary to accommodate different genetic relationships between meat quality, carcass and live animal traits.

scholarly journals Effect of Breed and Gender on Meat Quality of M. longissimus thoracis et lumborum Muscle from Crossbred Beef Bulls and Steers

Foods ◽  
2019 ◽  
Vol 8 (5) ◽  
pp. 173 ◽  
Author(s):  
Jamie Cafferky ◽  
Ruth M. Hamill ◽  
Paul Allen ◽  
John V. O’Doherty ◽  
Andrew Cromie ◽  
...  
Keyword(s):  
Meat Quality ◽  
Shear Force ◽  
Eating Quality ◽  
Drip Loss ◽  
Quality Traits ◽  
And Gender ◽  
The Relationship ◽  
Sire Breed ◽  
Insight Into

The objective of this study was to determine whether sire breed and/or castration had an effect on meat quality of M. longissimus thoracis et lumborum (LTL) muscle from crossbred bulls and steers and to investigate the relationship amongst the traits examined. Warner–Bratzler shear force (WBSF), intramuscular fat (IMF)%, cook-loss%, drip-loss%, colour (L*, a*, b*) and ultimate pH (upH) were determined in the LTL muscle from eight beef sire breeds representative of the Irish herd (Aberdeen Angus, Belgian Blue, Charolais, Hereford, Limousin, Parthenaise, Salers and Simmental). The results indicate that IMF%, cook-loss% and drip-loss% were associated with breed (p < 0.05); while WBSF, IMF% and cook-loss% differ between genders (p < 0.05). Steer LTL had a greater IMF% and exhibited reduced WBSF and cook-loss% in comparison to the bull LTL (p < 0.05). This study provides greater insight into how quality traits in beef are influenced by breed and gender and will support the industry to produce beef with consistent eating quality.

scholarly journals 41 Estimating the heritability of meat quality traits in turkeys

2020 ◽  
Vol 98 (Supplement_4) ◽  
pp. 18-19
Author(s):  
Ryley J Vanderhout ◽  
Michelle Yahiro ◽  
Benjamin Wood ◽  
Shai Barbut ◽  
Jeff S Mohr ◽  
...  
Keyword(s):  
Meat Quality ◽  
Shear Force ◽  
Live Weight ◽  
Drip Loss ◽  
Quality Traits ◽  
Breast Meat ◽  
Meat Yield ◽  
Meat Quality Traits ◽  
White Striping ◽  
Breast Meat Yield

Abstract Genetic selection for improved meat quality traits has been successfully implemented in many livestock species. The objective of this study was to estimate the heritability of several meat quality traits to assess their selection potential in turkeys. Pedigree toms (n = 1,033) were processed at a commercial facility and live weight, breast meat yield (as a percentage of live weight), ultimate pH, color (CIELAB values), drip loss, cooking loss, and shear force were recorded on M. pectoralis superficialis (fillet). White striping was also rated on a 1–4 scale. Heritabilities were estimated using univariate animal models in ASReml version 4.1. Hatch week and age at slaughter were included as fixed effects in the mode,l and 32 generations of pedigree records were used. Breast meat yield (h2 = 0.62; SE = 0.090) showed the highest heritability and was higher compared to previous estimates, probably due to the smaller sample size. Live weight (h2 = 0.31; SE = 0.078), ultimate pH (h2 = 0.36; SE = 0.087), lightness (h2 = 0.28; SE = 0.086), redness (h2 = 0.22; SE = 0.075), and white striping score (h2 = 0.27; SE = 0.085) all had moderate heritabilities. The estimate for ultimate pH was similar to previous studies in broilers but was high compared to previous studies in turkeys. Estimates for color were similar to those found in previous studies involving turkeys. Drip loss and cooking loss had similar heritability estimates of 0.13 (SE = 0.071) and 0.10 (SE = 0.064), respectively, which were akin to previous estimates in pork. Shear force (h2 = 0.02; SE = 0.056) was found to have a very low heritability. In conclusion, the heritability estimates provided in this study show great potential for the inclusion of meat quality traits in selection programs of turkeys. This study is part of a larger project working towards the implementation of genomic information in the selection of turkeys for improved meat quality.

scholarly journals Prediction of genomic breeding values for growth, carcass and meat quality traits in a multi-breed sheep population using a HD SNP chip

BMC Genetics ◽  
2017 ◽  
Vol 18 (1) ◽  
Author(s):  
Luiz F. Brito ◽  
Shannon M. Clarke ◽  
John C. McEwan ◽  
Stephen P. Miller ◽  
Natalie K. Pickering ◽  
...  
Keyword(s):  
Meat Quality ◽  
Quality Traits ◽  
Sheep Population ◽  
Genomic Breeding ◽  
Breeding Values ◽  
Snp Chip ◽  
Meat Quality Traits ◽  
Breed Sheep

Differences in carcass traits, meat quality and chemical composition between the pigs of different CAST genotype

2016 ◽  
Vol 56 (10) ◽  
pp. 1745 ◽  
Author(s):  
I. Djurkin Kušec ◽  
G. Kušec ◽  
R. Vuković ◽  
E. Has-Schön ◽  
G. Kralik
Keyword(s):  
Chemical Composition ◽  
Meat Quality ◽  
Shear Force ◽  
Carcass Traits ◽  
Muscle Thickness ◽  
Intensity Level ◽  
Quality Traits ◽  
Calpain Activity ◽  
Meat Quality Traits ◽  
Pig Carcasses

The study was carried out on 89 Pig Improvement Co. (PIC) pig carcasses, with the aim to investigate the differences between three CAST loci in carcass and meat-quality traits, as well as chemical composition of longissimus dorsi (LD) muscle. The differences among genotypes at CAST/HinfI locus were significant in all carcass traits measured, where AB genotype exhibited preferable values in carcass lengths, ham length, muscle thickness, loin eye area, fat thickness and fat area. Among meat-quality traits analysed, genotypes at CAST/HinfI locus differed in pH45 in SM muscle, both pH24 in semimembranosus (SM) and LD muscles, as well as luminosity; genotypes at CAST/MspI differed in pH24 and EC24 measured at LD muscle and in red colour intensity, level of yellowness and hue angle; while genotypes at CAST/RsaI differed in pH45 and EC45 in SM muscle, pH24 in LD muscle, paleness and redness, as well as in shear force and calpain activity. EF genotype at this locus exhibited the highest pH values and the lowest CIE L*, with more pronounced red colour, but also highest shear force and lowest calpain activity values. Furthermore, significant differences in chemical composition of LD muscle were found only among genotypes at CAST/RsaI loci, where FF genotype had the lowest intramuscular fat and the highest relative share of protein.

Castration age and growth, meat production and meat quality of Nellore male cattle

2020 ◽  
Vol 60 (5) ◽  
pp. 725
Author(s):  
R. J. Anaruma ◽  
L. G. Reis ◽  
P. E. de Felício ◽  
S. B. Pflanzer ◽  
S. Rossi ◽  
...  
Keyword(s):  
Meat Quality ◽  
Average Daily Gain ◽  
Carcass Weight ◽  
Age And Growth ◽  
Meat Production ◽  
Quality Traits ◽  
Muscle Area ◽  
Sensory Property ◽  
Meat Quality Traits

Castration in beef cattle production has been proposed to reduce sexual and aggressive behaviour, increase carcass fat deposition, and improve meat quality traits, such as tenderness and juiciness. The aim of the present study was to evaluate the effects of the age of castration on performance, subprimal yield and meat quality of Nellore cattle raised on a pasture system. A total of 24 Nellore males were raised in a grass-fed system with Brachiaria brizantha since birth until slaughter (at 30 months old). Three treatments were assigned: castration at weaning (CW); castration at 20 months old (C20); and intact bulls (NoC). Males were weighed, and muscle and fat thickness were periodically evaluated by ultrasonography. The cold carcass weight, dressing and carcass pH (pH 24), and subprimal cut weights were recorded after 24 h of chilling. Samples of Longissimus lumborum (LL) were taken to measure meat quality traits. Animals that were castrated at weaning had lower bodyweight after 10 months of age with no changes in the supplement intakes, average daily gain, hot carcass weight and cold carcass weight compared with NoC. Intact males had greater cooking losses and carcass yield compared with others, with no differences for LL pH 24 according to the treatments. The castration did not change the LL muscle area, but decreased total forequarter, chunk, shoulder and eye of round weights, and increased the back fat over LL and rump fat. Animals castrated at weaning had higher marbling compared with others. In addition, regardless of age, castration improved tenderness, increased LL total lipids and decreased moisture compared with NoC. For sensory property, steers castrated at 20 months of age had lower juiciness, and NoC had a greater global sensory property compared with steers castrated at 20 months old. In conclusion, steers castrated at weaning had lower growth rate, final bodyweight and meat production compared with intact males. However, when castration was performed at 20 months, animals did not differ in most cases from castration at weaning and NoC. Tenderness was improved by castration, but sensory traits did not differ between groups.

Comparisons of meat quality and muscle fibre characteristics on multiple pig breeds and sexes using principal component analysis

2018 ◽  
Vol 58 (11) ◽  
pp. 2091 ◽  
Author(s):  
Jun-Mo Kim ◽  
Sang-Hoon Lee ◽  
Youn-Chul Ryu
Keyword(s):  
Muscle Fibre ◽  
Meat Quality ◽  
Principal Component ◽  
Muscle Fibres ◽  
Drip Loss ◽  
Quality Traits ◽  
Pig Breeds ◽  
Meat Quality Traits ◽  
Fibre Characteristics

Comprehensive understanding of the effect of pig breed and sex on meat quality and post-mortem muscle conditions will be necessary to estimate meat quality post mortem. In this study, we applied multiple regression and principal component analysis (PCA) using conventional meat quality traits and muscle fibre characteristics on six pig breeds and different sexes. A total of 1374 pigs from six breeds [Berkshire, Duroc, Landrace, Meishan, Yorkshire, and LYD (Landrace × Yorkshire sows with Duroc as terminal sires) crossbreed] belonging to three sexes (male, castrated male and female) were used in this study. Most of the muscle fibre characteristics showed moderate to high significant correlations with conventional meat quality traits. In particularly, the cross-sectional area (CSAF) of muscle fibres was strongly correlated with muscle pH values, water-holding capacity values and lightness (0.10 < |r| <0.26 and P < 0.01). Multiple regression analysis by general linear model revealed that the effects of breed were significant on muscle pH24h, lightness, drip loss, and marbling score (P < 0.01), whereas sex had no significant effect on meat quality. In the muscle fibre characteristics, the effects of breed and sex were significant on composition of area and density of muscle fibres (P < 0.05). We observed that the Meishan breed was clearly inferior to other breeds, whereas the LYD or Berkshire breeds showed better meat quality and muscle fibre properties. Moreover, we observed clear separations between pig breeds based on the PCA, whereas the sexes in each breed presented a continuum cluster. In summary, we suggest that muscle pH24h, lightness, and drip loss are conventional meat quality traits that can be considered as quantitative factors important in estimating ultimate meat quality of pigs along with the CSAF of muscle fibres; we conclude that Meishan pigs have low meat quality, whereas Berkshire and LYD crossbred pigs have higher quality of pork.

scholarly journals Genetic parameter estimation for reproductive traits in QingYu pigs and comparison of carcass and meat quality traits to Berkshire×QingYu crossbred pigs

2020 ◽  
Vol 33 (8) ◽  
pp. 1224-1232
Author(s):  
Jia Luo ◽  
Yiting Yang ◽  
Kun Liao ◽  
Bin Liu ◽  
Ying Chen ◽  
...  
Keyword(s):  
Birth Weight ◽  
Meat Quality ◽  
Genetic Parameter ◽  
Reproductive Traits ◽  
Quality Traits ◽  
Muscle Area ◽  
Weaning Weight ◽  
Slaughter Weight ◽  
Meat Quality Traits

Objective: The QingYu pig is well known for its excellent meat quality attributes in Sichuan province, China. In order to improve its production efficiency, the determination of genetic factors contributing to quantifiable economic traits of livestock is important. Moreover, the cross-breeding of QingYu pigs with western breeds possessing strong growth attributes is an efficient way to improve the performance of this breed.Methods: Here, the genetic parameters of several important reproductive traits of QingYu pigs were estimated, include total number born (TNB), number born alive, litter birth weight, individual birth weight, number of piglets weaned, litter weaning weight, and individual weaning weight. The data was analyzed using the ASReml 3.0 software (NSW Inc., Sydney, Australia). Furthermore, the effects of crossing Berkshire with QingYu (BQ) pigs on carcass and meat quality traits, as well as the effects of slaughter weight on carcass and meat quality of BQ were characterized.Results: QingYu pigs exhibited superior reproductive traits. The TNB available to QingYu pigs was more than 8 per parity. The observed repeatability of the reproductive traits of the QingYu pigs was between 0.10 and 0.23. The significantly correlated genetic and phenotypic of reproduction traits were consistent. Interestingly, the BQ pigs exhibited improved carcass quality, with a significant increase in loin muscle area, lean percentage and reduction in sebum percentage. As a result, BQ had higher L<sub>45min</sub>, lower cooking scores, and lower drip loss. In addition, the loin muscle area, body length, and sebum percentage were significantly higher in 90 and 100 kg animals. Cooking loss showed a significant increase at 80 kg, and marbling increased significantly from 90 kg.Conclusion: The results of this study suggest that QingYu pigs exhibit excellent reproductive properties and heritability of these traits. Crossing with Berkshire is an efficient strategy to improve the carcass and meat quality of QingYu pigs for commercial operations. Furthermore, it appears as though the optimal slaughter weight of BQ pigs is at approximately 90 kg.

scholarly journals Effects of crossing of domestic breed with beef breeds on the quality of meat in PR China and Republic of Serbia

2013 ◽  
Vol 29 (2) ◽  
pp. 385-397
Author(s):  
S. Aleksic ◽  
Sun Fang ◽  
Liu Di ◽  
M.M. Petrovic ◽  
V. Pantelic ◽  
...  
Keyword(s):  
Beef Cattle ◽  
Meat Quality ◽  
Quality Traits ◽  
Beef Production ◽  
Cattle Breeds ◽  
Meat Quality Traits ◽  
Lean Beef ◽  
Beef Cattle Breeds ◽  
French Beef

This paper presents the results of crossing Domestic Spotted breed with beef cattle breeds in the People's Republic of China and the Republic of Serbia. China is a big country of beef production and consumption. In 2012, beef production in China was 5,540,000 tons, which accounted for 9.7% of the global beef production, ranking the third in the world. The main sources of China?s beef are from crossbreeding cattle (native breed crossbred with foreign beef cattle). Simmental cattle are the most-widely used beef cattle in China?s improved beef cattle. China has cultivated its own Simmental after over 40 years? crossbreeding and improvement. China?s consumers mainly have three demands for beef quality as follows: expensive beef produced from Wagyu crossbreed with better marbling; lean beef from Simmental, Charolais and Limousin crossbreeds, top parts supplied to hotels while common parts to supermarkets; veal from cow calves. Chinese researchers are carrying out researches which are centered on marbling beef, lean beef and veal on complete techniques of good breed, feeding management, slaughter and cutting and carcass classification. At present, researchers have lively interest in functional genomics of meat quality traits of cattle, they expect to use these methods to study meat quality traits and then improve the meat quality. Improved cattle breeds universally utilized in China are mainly Simmental followed by Charolais, Limousin, Wagyu and Angus. Other three cattle breeds including Belgian blue cattle, Piedmontese and Gelbvien have ever been applied, however, rarely used in present beef cattle production. Republic of Serbia has in the future to quickly and efficiently provide adequate quantities of top quality meat. One of the ways to increase the yield and quality of the meat is crossing of Domestic spotted cattle of lower production traits with French beef cattle breeds. Beef production in the EU is adapted to the consumer taste. Meat must have a light red colour, equally suffused with fat and with pronounced sensory characteristics such as tenderness, juiciness, flavour and aroma. The results on the quality of meat of F1 generation crosses (Domestic Spotted breed with French beef cattle breeds Charolais and Limousine) indicate that by industrial crossing beef, meat-packing and organoleptic characteristics of meat can be improved.

Sign in / Sign up

Export Citation Format

Share Document