scholarly journals The first century of Phalaris aquatica L. cultivation and genetic improvement: a review

2009 ◽  
Vol 60 (1) ◽  
pp. 1 ◽  
Author(s):  
R. N. Oram ◽  
V. Ferreira ◽  
R. A. Culvenor ◽  
A. A. Hopkins ◽  
A. Stewart
Keyword(s):  
South Africa ◽  
New Zealand ◽  
Large Scale ◽  
Small Scale ◽  
Scale Production ◽  
Department Of Agriculture ◽  
Factors Affecting ◽  
Phalaris Aquatica ◽  
Seed Retention ◽  
The Usa

2006 marked the centenary of the commercial propagation of phalaris (Phalaris aquatica L.) as a cultivated pasture plant, firstly in Australia, and soon after in New Zealand, South Africa, and North and South America. Small-scale evaluation of cv. Australian began in the Toowoomba Botanic Gardens, Queensland, in 1884. The first recorded large-scale production of seed was at the Glen Innes Research Farm of the NSW Department of Agriculture in February 1906. By 1908–15, several graziers in Australia and New Zealand sold seed widely within Australia, New Zealand, USA, Argentina, and South Africa. Factors affecting the utilisation of the original cultivar in Australia over the first half-century are reviewed. Thereafter, the need to extend the area of perennial pastures into regions unsuitable for cv. Australian led CSIRO and the US Department of Agriculture to collect germplasm widely in the Mediterranean region. Selection between and within Moroccan populations produced cvv. Sirocco and El Golea in Australia, and cv. Perla koleagrass in the USA. In Argentina, selection within cv. Australian produced the very successful, seed-retaining cv. Pergamino El Gaucho INTA, which was re-selected in Australia to produce cv. Seedmaster. The discovery of a single seed-retaining plant within a certified line of cv. Australian gave cv. Uneta, which had excellent seed retention because the rachillae of most seeds remained intact at maturity. In Australia, selection in populations derived from crosses between cv. Australian and Mediterranean ecotypes gave a succession of winter-active cultivars: Sirosa, Sirolan, Holdfast, Landmaster, Atlas PG, Advanced AT, and Holdfast GT. The latter 5 have Uneta-type seed retention, reduced tryptamine and tyramine alkaloids, and adaptation to different soil and climatic niches. Populations for the hotter, drier inland slopes of NSW are being field-tested. Also, a promising but unstable semi-dwarf line has been found: dwarfism appears to be caused by a transposable element. Breeding and selection programs in Argentina, several states of the USA, New Zealand, Israel, Tunisia, and Greece also produced cultivars with specific adaptations. Active breeding programs are continuing at Ardmore, OK, USA, and Pergamino, Argentina. A major remaining obstacle to the further improvement and utilisation of phalaris is the unknown chemical nature of the toxin(s) causing ‘sudden death’, which temporarily interfere with nitrogen metabolism in the brains of herbivores, especially ruminants.

Analysis of Advanced Algorithms Master Production Schedule for Custom Manufacture of Furniture

2017 ◽  
Vol 7 (3) ◽  
pp. 299-306
Author(s):  
Д. Нырков ◽  
D. Nyrkov ◽  
Александр Стариков ◽  
Aleksandr Starikov
Keyword(s):  
Production Scheduling ◽  
Large Scale ◽  
Western Europe ◽  
Small Scale ◽  
Main Role ◽  
Scale Production ◽  
Early Completion ◽  
Factors Affecting ◽  
Master Production Scheduling ◽  
Mathematical Algorithms

The article discusses the algorithms employed in automated systems for master production scheduling in the applicability of their produce-to-order furniture. Small batch and custom production of furniture occupies a significant market share, as we do, and in the countries of Western Europe. Also, it is a prospective direction of development for other industries, focused on the end user. Most of the existing national planning systems designed for large-scale and mass production, in which the main role takes enterprise performance. Therefore, the main indicator, which is used by the optimization of scheduling, is the moment of completion of the last job. However, custom production is much more complex factors affecting the success of the enterprise as a whole: a key indicator in this case is the completion of all work no later than the specified time, not their early completion (within the terms established by treaties with customers). Also in the custom and small-scale production, it takes an important role time index spent on readjustment of the equipment associated with the transition to a different type of output. If these and other indicators do not have a significant role in large-scale production, the small-scale productions of these indicators have a significant impact on the performance of the enterprise, and they can no longer be neglected. In this paper, the three most promising mathematical algorithms (algorithm simulated annealing, genetic algorithm and artificial neural network), which allow us to optimize schedules based on several criteria applied to the problem of master production scheduling, customized production of furniture.

AGRICULTURAL PRODUCTION OF CA DONG PEOPLE IN RESETTLEMENT AREA OF TRANH RIVER HYDROPOWER NUMBER 2: CURRENT SITUATION AND IMPACT FACTORS

2020 ◽  
Vol 9 (2) ◽  
Author(s):  
Bùi Thị Bích Lan
Keyword(s):  
Social Relations ◽  
Agricultural Production ◽  
Large Scale ◽  
Transition Process ◽  
Impact Factors ◽  
Small Scale ◽  
Scale Production ◽  
Technical Application ◽  
Production Models ◽  
Role Of The State

In Vietnam, the construction of hydropower projects has contributed significantly in the cause of industrialization and modernization of the country. The place where hydropower projects are built is mostly inhabited by ethnic minorities - communities that rely primarily on land, a very important source of livelihood security. In the context of the lack of common productive land in resettlement areas, the orientation for agricultural production is to promote indigenous knowledge combined with increasing scientific and technical application; shifting from small-scale production practices to large-scale commodity production. However, the research results of this article show that many obstacles in the transition process are being posed such as limitations on natural resources, traditional production thinking or the suitability and effectiveness of scientific - technical application models. When agricultural production does not ensure food security, a number of implications for people’s lives are increasingly evident, such as poverty, preserving cultural identity, social relations and resource protection. Since then, it has set the role of the State in researching and building appropriate agricultural production models to exploit local strengths and ensure sustainability.

scholarly journals Progress in Research on Carbon Nanotubes Reinforced Cementitious Composites

2015 ◽  
Vol 2015 ◽  
pp. 1-16 ◽  
Author(s):  
Qinghua Li ◽  
Jintao Liu ◽  
Shilang Xu
Keyword(s):  
Carbon Nanotubes ◽  
Large Scale ◽  
High Strength ◽  
Cementitious Composites ◽  
Scale Production ◽  
Multiwalled Carbon ◽  
Factors Affecting ◽  
Environment And Health ◽  
Research Activities ◽  
Major Factors

As one-dimensional (1D) nanofiber, carbon nanotubes (CNTs) have been widely used to improve the performance of nanocomposites due to their high strength, small dimensions, and remarkable physical properties. Progress in the field of CNTs presents a potential opportunity to enhance cementitious composites at the nanoscale. In this review, current research activities and key advances on multiwalled carbon nanotubes (MWCNTs) reinforced cementitious composites are summarized, including the effect of MWCNTs on modulus of elasticity, porosity, fracture, and mechanical and microstructure properties of cement-based composites. The issues about the improvement mechanisms, MWCNTs dispersion methods, and the major factors affecting the mechanical properties of composites are discussed. In addition, large-scale production methods of MWCNTs and the effects of CNTs on environment and health are also summarized.

Species Responses to Grazing and Environmental-Factors in an Arid Halophytic Shrubland Community

1987 ◽  
Vol 35 (2) ◽  
pp. 135 ◽  
Author(s):  
RB Hacker
Keyword(s):  
Environmental Factors ◽  
Soil Salinity ◽  
Large Scale ◽  
Chemical Properties ◽  
Grazing Pressure ◽  
Aerial Photographs ◽  
Small Scale ◽  
Factors Affecting ◽  
Species Responses

Species responses to grazing and environmental factors were studied in an arid halophytic shrubland community in Western Australia. The grazing responses of major shrub species were defined by using reciprocal averaging ordination of botanical data, interpreted in conjunction with a similar ordination of soil chemical properties and measures of soil erosion derived from large-scale aerial photographs. An apparent small-scale interaction between grazing and soil salinity was also defined. Long-term grazing pressure is apparently reduced on localised areas of high salinity. Environmental factors affecting species distribution are complex and appear to include soil salinity, soil cationic balance, geomorphological variation and the influence of cryptogamic crusts on seedling establishment.

scholarly journals Fabrication Techniques for Graphene Oxide-Based Molecular Separation Membranes: Towards Industrial Application

Nanomaterials ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 757
Author(s):  
Ohchan Kwon ◽  
Yunkyu Choi ◽  
Eunji Choi ◽  
Minsu Kim ◽  
Yun Chul Woo ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Large Scale ◽  
Spray Coating ◽  
Dip Coating ◽  
Small Scale ◽  
Scale Production ◽  
Separation Membranes ◽  
Current Review ◽  
Slot Die ◽  
Continuous Fabrication

Graphene oxide (GO) has been a prized material for fabricating separation membranes due to its immense potential and unique chemistry. Despite the academic focus on GO, the adoption of GO membranes in industry remains elusive. One of the challenges at hand for commercializing GO membranes lies with large-scale production techniques. Fortunately, emerging studies have acknowledged this issue, where many have aimed to deliver insights into scalable approaches showing potential to be employed in the commercial domain. The current review highlights eight physical methods for GO membrane fabrication. Based on batch-unit or continuous fabrication, we have further classified the techniques into five small-scale (vacuum filtration, pressure-assisted filtration, spin coating, dip coating, drop-casting) and three large-scale (spray coating, bar/doctor blade coating, slot die coating) approaches. The continuous nature of the large-scale approach implies that the GO membranes prepared by this method are less restricted by the equipment’s dimensions but rather the availability of the material, whereas membranes yielded by small-scale methods are predominately limited by the size of the fabrication device. The current review aims to serve as an initial reference to provide a technical overview of preparing GO membranes. We further aim to shift the focus of the audience towards scalable processes and their prospect, which will facilitate the commercialization of GO membranes.

Control of chironomid midge larvae in wastewater stabilisation ponds: comparison of five compounds

2005 ◽  
Vol 51 (12) ◽  
pp. 191-199 ◽  
Author(s):  
R. Craggs ◽  
L. Golding ◽  
S. Clearwater ◽  
L. Susarla ◽  
W. Donovan
Keyword(s):  
New Zealand ◽  
Bacillus Thuringiensis ◽  
Urban Areas ◽  
Large Scale ◽  
Adult Emergence ◽  
Small Scale ◽  
Slight Reduction ◽  
Organic Loading ◽  
Valuable Component ◽  
Pre Treatment

Chironomid midge larvae are a valuable component of wastewater stabilisation pond (WSP) ecology. However, in high numbers, adult midge swarms can be a nuisance to near-by urban areas. Improving WSP treatment by incorporating aerobic or maturation ponds or by the addition of pre-treatment to reduce organic loading also increases the availability of aerobic sediment (midge larva habitat) in the pond system and the potential for midge nuisance problems. The efficacy of Maldison, an organophosphate traditionally used to control midge larvae in New Zealand WSPs, was compared to Bacillus thuringiensis var. israelensis (Bti), Methoprene, Pyriproxyfen and Diflubenzuron which are all more specific to insects and have fewer adverse environmental effects. Initial laboratory trials established the concentration of each compound required to achieve 95% control of the midge population. During 21-day small-scale trials within the WSP, Bti, Diflubenzuron and Maldison reduced live larvae numbers substantially (80–89%) compared to controls and adult midge emergence was markedly reduced by all compounds (72–96%). Large-scale trials with Bti (Vectobac® WG) powder (1000 μg/L) only caused a slight reduction in midge larvae numbers compared to controls and had little effect on adult emergence, however, Methoprene (Prolink XRG granules) (50 μgAI/L) reduced midge adult emergence by ∼80% over 25 days and has been used successfully to control several midge nuisance outbreaks.

scholarly journals Technology Acceptance in Healthcare: A Systematic Review

2021 ◽  
Vol 11 (22) ◽  
pp. 10537
Author(s):  
Adi A. AlQudah ◽  
Mostafa Al-Emran ◽  
Khaled Shaalan
Keyword(s):  
Systematic Review ◽  
Technology Acceptance ◽  
Large Scale ◽  
Empirical Studies ◽  
Influential Factors ◽  
Full Potential ◽  
Eligibility Criteria ◽  
Factors Affecting ◽  
The Usa ◽  
Healthcare Technologies

Understanding the factors affecting the use of healthcare technologies is a crucial topic that has been extensively studied, specifically during the last decade. These factors were studied using different technology acceptance models and theories. However, a systematic review that offers extensive understanding into what affects healthcare technologies and services and covers distinctive trends in large-scale research remains lacking. Therefore, this review aims to systematically review the articles published on technology acceptance in healthcare. From a yield of 1768 studies collected, 142 empirical studies have met the eligibility criteria and were extensively analyzed. The key findings confirmed that TAM and UTAUT are the most prevailing models in explaining what affects the acceptance of various healthcare technologies through different user groups, settings, and countries. Apart from the core constructs of TAM and UTAUT, the results showed that anxiety, computer self-efficacy, innovativeness, and trust are the most influential factors affecting various healthcare technologies. The results also revealed that Taiwan and the USA are leading the research of technology acceptance in healthcare, with a remarkable increase in studies focusing on telemedicine and electronic medical records solutions. This review is believed to enhance our understanding through a number of theoretical contributions and practical implications by unveiling the full potential of technology acceptance in healthcare and opening the door for further research opportunities.

scholarly journals Low-cost Large Scale Vermicompost Unit

2021 ◽  
Vol 2115 (1) ◽  
pp. 012026
Author(s):  
Sonam Solanki ◽  
Gunendra Mahore
Keyword(s):  
Large Scale ◽  
Low Cost ◽  
Small Scale ◽  
Scale Production ◽  
Key Innovation ◽  
Main Challenge ◽  
Long Run ◽  
Large Scale Production ◽  
Term Maintenance

Abstract In the current process of producing vermicompost on a large-scale, the main challenge is to keep the worms alive. This is achieved by maintaining temperature and moisture in their living medium. It is a difficult task to maintain these parameters throughout the process. Currently, this is achieved by building infrastructure but this method requires a large initial investment and long-run maintenance. Also, these methods are limited to small-scale production. For large-scale production, a unit is developed which utilises natural airflow with water and automation. The main aim of this unit is to provide favourable conditions to worms in large-scale production with very low investment and minimum maintenance in long term. The key innovation of this research is that the technology used in the unit should be practical and easy to adopt by small farmers. For long-term maintenance of the technology lesser number of parts are used.

The Scalability of Wet Ball Milling for The Production of Nanosuspensions

2019 ◽  
Vol 7 (2) ◽  
pp. 147-161 ◽  
Author(s):  
Maria L.A.D. Lestari ◽  
Rainer H. Müller ◽  
Jan P. Möschwitzer
Keyword(s):  
Ball Milling ◽  
Large Scale ◽  
Milling Time ◽  
High Energy ◽  
Small Scale ◽  
Particle Sizes ◽  
Scale Production ◽  
Batch Mode ◽  
Pharmaceutical Ingredients ◽  
Large Scale Production

Background: Miniaturization of nanosuspensions preparation is a necessity in order to enable proper formulation screening before nanosizing can be performed on a large scale. Ideally, the information generated at small scale is predictive for large scale production. Objective: This study was aimed to investigate the scalability when producing nanosuspensions starting from a 10 g scale of nanosuspension using low energy wet ball milling up to production scales of 120 g nanosuspension and 2 kg nanosuspension by using a standard high energy wet ball milling operated in batch mode or recirculation mode, respectively. Methods: Two different active pharmaceutical ingredients, i.e. curcumin and hesperetin, have been used in this study. The investigated factors include the milling time, milling speed, and the type of mill. Results: Comparable particle sizes of about 151 nm to 190 nm were obtained for both active pharmaceutical ingredients at the same milling time and milling speed when the drugs were processed at 10 g using low energy wet ball milling or 120 g using high energy wet ball milling in batch mode, respectively. However, an adjustment of the milling speed was needed for the 2 kg scale produced using high energy wet ball milling in recirculation mode to obtain particle sizes comparable to the small scale process. Conclusion: These results confirm in general, the scalability of wet ball milling as well as the suitability of small scale processing in order to correctly identify the most suitable formulations for large scale production using high energy milling.

scholarly journals Solutions for changing production scale in the agricultural sector in Vietnam

2020 ◽  
Vol 175 ◽  
pp. 10008
Author(s):  
Thi Hoai Nguyen ◽  
Duc Luan Nguyen
Keyword(s):  
Labor Productivity ◽  
Agricultural Production ◽  
Large Scale ◽  
Agricultural Sector ◽  
Current Situation ◽  
Small Scale ◽  
Scale Production ◽  
Number Of Solutions ◽  
Production Scale ◽  
Large Scale Production

In this paper, the authors analyze the current situation of agricultural production in Vietnam and affirm that fragmentation is one of the basic causes leading to ineffective potentials and low labor productivity. Based on this, the authors propose a number of solutions to convert small-scale production to large-scale production in order to improve labor productivity and optimally exploit resources in the agricultural sector in Vietnam today.

Sign in / Sign up

Export Citation Format

Share Document