Oxidation of Nickel(II) and Manganese(II) by Peroxodisulfate in Aqueous Solution in the Presence of Molybdate. Crystal Structure of the (NH4)6[NiMo9O32].6H2O Product

1992 ◽  
Vol 45 (12) ◽  
pp. 1943 ◽  
Author(s):  
SJ Dunne ◽  
RC Burns ◽  
GA Lawrance
Keyword(s):  
Rate Constant ◽  
Linear Dependence ◽  
Ph Dependence ◽  
Order Rate Constant ◽  
X Ray Diffraction ◽  
X Ray ◽  
First Order ◽  
Oxidant Concentration ◽  
Ph Range ◽  
Kinetics Of

Oxidation of Ni2+,aq, by S2O82- to nickel(IV) in the presence of molybdate ion, as in the analogous manganese system, involves the formation of the soluble heteropolymolybdate anion [MMogO32]2- (M = Ni, Mn ). The nickel(IV) product crystallized as (NH4)6 [NiMogO32].6H2O from the reaction mixture in the rhombohedra1 space group R3, a 15.922(1), c 12.406(1) � ; the structure was determined by X-ray diffraction methods, and refined to a residual of 0.025 for 1741 independent 'observed' reflections. The kinetics of the oxidation were examined at 80 C over the pH range 3.0-5.2; a linear dependence on [S2O82-] and a non-linear dependence on l/[H+] were observed. The influence of variation of the Ni/Mo ratio between 1:10 and 1:25 on the observed rate constant was very small at pH 4.5, a result supporting the view that the precursor exists as the known [NiMo6O24H6]4- or a close analogue in solution. The pH dependence of the observed rate constant at a fixed oxidant concentration (0.025 mol dm-3) fits dequately to the expression kobs = kH [H+]/(Ka+[H+]) where kH = 0.0013 dm3 mol-1 s-1 and Ka = 4-0x10-5. The first-order dependence on peroxodisulfate subsequently yields a second-order rate constant of 0.042 dm3 mol-1 s-1. Under analogous conditions, oxidation of manganese(II) occurs eightfold more slowly than oxidation of nickel(II), whereas oxidation of manganese(II) by peroxomonosulfuric acid is 16-fold faster than oxidation by peroxodisulfate under similar conditions.

Studies on Horseradish Peroxidase. VII. A Kinetic Study of the Oxidation of Iodide by Horseradish Peroxidase Compound II

1971 ◽  
Vol 49 (18) ◽  
pp. 3059-3063 ◽  
Author(s):  
R. Roman ◽  
H. B. Dunford ◽  
M. Evett
Keyword(s):  
Ionic Strength ◽  
Horseradish Peroxidase ◽  
Kinetic Study ◽  
Rate Constant ◽  
Ph Dependence ◽  
Order Rate Constant ◽  
Acid Dissociation ◽  
Ph Range ◽  
Compound Ii ◽  
Kinetics Of

The kinetics of the oxidation of iodide ion by horseradish peroxidase compound II have been studied as a function of pH at 25° and ionic strength of 0.11. The logarithm of the second-order rate constant decreases linearly from 2.3 × 105 to 0.1 M−1 s−1 with increasing pH over the pH range 2.7 to 9.0. The pH dependence of the reaction is explained in terms of an acid dissociation outside the pH range of the study.

Efficient adsorption of chlorpyrifos onto modified activated carbon by gamma irradiation; a plausible adsorption mechanism

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Mohamed S. Yahia ◽  
Ahmed S. Elzaref ◽  
Magdy B. Awad ◽  
Ahmed M. Tony ◽  
Ahmed S. Elfeky
Keyword(s):  
Gamma Irradiation ◽  
Area Measurement ◽  
Maximum Adsorption Capacity ◽  
X Ray Diffraction ◽  
X Ray ◽  
First Order ◽  
Pseudo Second Order ◽  
Ft Ir ◽  
Pseudo First Order ◽  
Kinetics Of

Abstract Commercial Granulated Active Carbon (GAC) has been modified using 10 Gy dose Gamma irradiation (GAC10 Gy) for increasing its ability of air purification. Both, the raw and treated samples were applied for removing Chlorpyrifos pesticide (CPF) from ambient midair. Physicochemical properties of the two materials were characterized by Fourier Transform Infrared (FT-IR) and Raman spectroscopy. The phase formation and microstructure were monitored using X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), supported with Energy-Dispersive X-ray (EDX). The Surface area measurement was detected using BET particle size prosometry. Obtained outcomes showed that, the maximum adsorption capacity, given by Langmuir equations, was greatly increased from 172.712 to 272.480 mg/g for GAC and GAC10 Gy, respectively, with high selectivity. The overall removal efficiency of GAC10 Gy was notably comparable to that of the original GAC-sorbent. The present study indicated that, gamma irradiation could be a promising technique for treating GAC and turned it more active in eliminating the pesticides pollutants from surrounding air. The data of equilibrium has been analyzed by Langmuir and Freundlich models, that were considerably better suited for the investigated materials than other models. The process kinetics of CPF adsorbed onto both tested carbon versions were found to obey the pseudo first order at all concentrations with an exception at 70 mg/l using GAC, where, the spontaneous exothermic adsorption of Chlorpyrifos is a strong function for the pseudo-first order (PFO) and pseudo second order (PSO) kinetics.

Beobachtungen von Stapelfehlordnungen bei der Oxydation der zweiten zur ersten Stufe des Graphithydrogensulfats / Observation of stacking disorder during the oxidation of second stage to first stage graphite hydrogensulfate

1984 ◽  
Vol 39 (8) ◽  
pp. 768-777 ◽  
Author(s):  
Ko Young Shin ◽  
Hanns-Peter Boehm
Keyword(s):  
Interlayer Spacing ◽  
X Ray Diffraction ◽  
X Ray ◽  
First Order ◽  
Second Stage ◽  
Intermediate Phases ◽  
Degree Of Oxidation ◽  
Stage 1 ◽  
Kinetics Of ◽  
Stacking Disorder

Graphite has been oxidized to graphite hydrogensulfate with (NH4)2S2Og in concentrated H2SO4. The stage 2 compound formed very rapidly, but further oxidation to stage 1 could be followed conveniently. X-ray diffraction of the intermediate phases showed nonintegral (00l)-reflections indicative of partial interstratification disorder. The interlayer spacing of the stage 1 compound increased with continued oxidation. The degree of oxidation as function of oxidation time has been determined from the position of the minima in the reflectance spectra. The density of the compounds and the ratio of acid molecules to anions in the intercalated layers has been estimated using these data and those of buoyancy measurements. There is a minimum in packing density early in the formation of the first stage. The kinetics of intercalation seems to be first order with respect to the free interlayer spaces.

Kinetics of reconstitution of apotyrosinase by copper

1990 ◽  
Vol 68 (2) ◽  
pp. 476-479
Author(s):  
Donald C. Wigfield ◽  
Douglas M. Goltz
Keyword(s):  
Rate Constant ◽  
Copper Concentration ◽  
Copper Ions ◽  
Copper Ion ◽  
Order Rate Constant ◽  
First Order ◽  
Order Rate ◽  
Pseudo First Order ◽  
Rate Limiting ◽  
Kinetics Of

The kinetics of the reconstitution reaction of apotyrosinase with copper (II) ions are reported. The reaction is pseudo first order with respect to apoenzyme and the values of these pseudo first order rate constants are reported as a function of copper (II) concentration. Two copper ions bind to apoenzyme, and if the second one is rate limiting, the kinetically relevant copper concentration is the copper originally added minus the amount used in binding the first copper ion to enzyme. This modified copper concentration is linearly related to the magnitude of the pseudo first order rate constant, up to a copper concentration of 1.25 × 10−4 M (10-fold excess), giving a second order rate constant of 7.67 × 102 ± 0.93 × 102 M−1∙s−1.Key words: apotyrosinase, copper, tyrosinase.

Open-chain nitrogen compounds. Part XV. A kinetic study of the hydrolysis of 1-aryl-3-aryloxymethyl-3-methyltriazenes and related triazenes

1992 ◽  
Vol 70 (8) ◽  
pp. 2224-2233 ◽  
Author(s):  
Keith Vaughan ◽  
Donald L. Hooper ◽  
Marcus P. Merrin
Keyword(s):  
Rate Constant ◽  
Order Rate Constant ◽  
Buffer System ◽  
Open Chain ◽  
Nucleophilic Displacement ◽  
Ether Oxygen ◽  
Rate Of Hydrolysis ◽  
Electron Withdrawing Group ◽  
Ph Range ◽  
Kinetics Of

The kinetics of hydyrolysis of a series of 1-aryl-3-aryloxymethyl-3-methyltriazenes, Ar-N=N-NMe-CH2OAr′, was studied over the pH range 2–7.5. Reactions were followed by the change in UV absorbance spectra of the triazenes. The aryloxymethyltriazenes decompose more slowly at pH 7.5 than the hydroxymethyltriazenes, Ar-N=NMe-CH2OH; the hydrolysis is favoured by the presence of an electron-withdrawing group in Ar′. A mixed isopropanol/buffer system was developed in order to improve solubility of the aryloxymethyl triazenes. Lowering the pH caused an increase in the rate of hydrolysis and under strongly acidic conditions an electron-withdrawing group in Ar′ actually slows down the reaction. A Hammett plot of the pseudo-first-order rate constant, kobs, is curved, indicating that two or more mechanisms operate simultaneously and that the contribution of each mechanism is substituent-dependent. A plot of kobs vs. [buffer] is linear; the slope of the plot affords the rate constant, kb for the buffer-catalyzed reaction for each substituent. A Hammett plot of kb vs. σ is linear with ρ = +0.55, suggesting that the buffer-catalyzed reaction involves nucleophilic displacement of the phenoxy group by the buffer anion. Further analysis afforded the specific acid-catalyzed rate constants, [Formula: see text], for each substituent; this component of the reaction has a negative ρ, consistent with a mechanism involving protonation at the ether oxygen. The postulation that specific acid catalysis is a component of the reaction mechanism was confirmed by the observation of a solvent deuterium isotope effect, 2.28 > kH/kD > 1.60. Only the p-NO2 and p-CN phenyloxymethyltriazenes showed any spontaneous decomposition.

The reaction of 2,4,6-trinitrobenzene sulfonic acid with pancreatic elastase

1970 ◽  
Vol 48 (11) ◽  
pp. 1249-1259 ◽  
Author(s):  
Leticia Rao ◽  
T. Hofmann
Keyword(s):  
Rate Constant ◽  
Sulfonic Acid ◽  
Ph Dependence ◽  
Order Rate Constant ◽  
Trinitrobenzene Sulfonic Acid ◽  
Amino Group ◽  
Tyrosine Residues ◽  
Inactivation Rate Constant ◽  
Lysine Residues ◽  
Ph Range

The reaction of elastase with trinitrobenzene sulfonic acid was investigated in the pH range 9–12. Elastase was found to be inactivated by 2,4,6-trinitrobenzene sulfonic acid. The pH dependence of the pseudo first-order inactivation rate constant showed a pK of 10.3 and gave a Hill plot coefficient of 1.15. Trinitrophenol did not inactivate the enzyme. These results indicate that the inactivation is due to the covalent reaction of trinitrobenzene sulfonic acid with a single group in the enzyme. This group is not the N-terminal since the loss of N-terminal valine was considerably slower than the loss of activity at pH 10.5. The inactivation of elastase with 2,4-dinitrofluorobenzene also showed no correlation with the loss of the N-terminal. When the enzyme was exhaustively treated and fully inactivated with trinitrobenzene sulfonic acid at pH 10.5, the N-terminal valine and two out of three lysine residues were trinitrophenylated. No evidence for the loss of histidine was found. One of the tyrosine residues may be trinitrophenylated as judged from the molar extinction of the trinitrophenylated protein, but it has not been possible to isolate a trinitrophenylated tyrosine-containing peptide. The results can be interpreted in one of two ways: (a) trinitrophenylation of a group with a pK of 10.3, not involved in the activity, inactivates because the introduction of the trinitrophenyl residue causes a denaturation of the enzyme; or (b) a group with a pK of 10.3 controls the active conformation of the enzyme. The results do not exclude the possibility that the N-terminal plays an important role in the activity of the enzyme. Below pH 10.5 the reactivity of the N-terminal is low, indicating that it is buried.At pH 9.0 only the ε-amino group of lysine in position 224 reacted with trinitrobenzene sulfonic acid and full activity was retained. The second-order rate constant for the trinitrophenylation of this group was 25 times higher than that of the ε-amino group of the α-N-benzoyllysine.

scholarly journals Heparin-stimulated inhibition of factor IXa generation and factor IXa neutralization in plasma

Blood ◽  
1990 ◽  
Vol 76 (3) ◽  
pp. 549-554
Author(s):  
J Pieters ◽  
T Lindhout ◽  
G Willems
Keyword(s):  
Unfractionated Heparin ◽  
Rate Constant ◽  
Calcium Ions ◽  
Order Rate Constant ◽  
Free Calcium ◽  
First Order ◽  
Factor Ixa ◽  
Factor Xia ◽  
Kinetics Of

Generation and inhibition of activated factor IXa was studied in factor XIa-activated plasma containing 4 mmol/L free calcium ions and 20 mumol/L phospholipid (25 mol% phosphatidylserine/75 mol% phosphatidylcholine). Interference of other (activated) clotting factors with the factor IXa activity measurements could be avoided by using a highly specific and sensitive bioassay. Factor IXa generation curves were analyzed according to a model that assumed Michaelis-Menten kinetics of factor XIa-catalyzed factor IXa formation and pseudo first order kinetics of inhibition of factor XIa and factor IXa. In the absence of heparin, factor IXa activity in plasma reached final levels that were found to increase with increasing amounts of factor XIa used to activate the plasma. When the model was fitted to this set of factor IXa generation curves, the analysis yielded a rate constant of inhibition of factor XIa of 0.7 +/- 0.1 min-1 and a kcat/Km ratio of 0.29 +/- 0.01 (nmol/L)-1 min-1. No neutralization of factor IXa activity was observed (the estimated rate constant of inhibition of factor IXa was 0). Thus, in the absence of heparin, the final level of factor IXa in plasma is only dependent on the initial factor XIa concentration. While neutralization of in situ generated factor IXa in normal plasma was negligible, unfractionated heparin dramatically enhanced the rate of inactivation of factor IXa (apparent second order rate constant of inhibition of 5.2 min-1/per microgram heparin/mL). The synthetic pentasaccharide heparin, the smallest heparin chain capable of binding antithrombin III, stimulated the inhibition of in situ generated factor IXa, but sevenfold less than unfractionated heparin (k = 0.76 min-1 per microgram pentasaccharide/mL). We found that free calcium ions were absolutely required to observe an unfractionated heparin and pentasaccharide-stimulated neutralization of factor IXa activity. Factor XIa inhibition (psuedo first order rate constant of 0.7 min-1) was not affected by unfractionated heparin or pentasaccharide in the range of heparin concentrations studied.

Kinetics and mechanism of the reaction of dimethyl acetylphosphonate with water. Expulsion of a phosphonate ester from a carbonyl hydrate

1978 ◽  
Vol 56 (13) ◽  
pp. 1792-1795 ◽  
Author(s):  
Ronald Kluger ◽  
David C. Pire ◽  
Jik Chin
Keyword(s):  
Rate Constant ◽  
Electronic Effect ◽  
Order Rate Constant ◽  
Ion Concentration ◽  
First Order ◽  
Cleavage Reactions ◽  
Ph Range ◽  
Rapid Hydrolysis ◽  
Hydrolysis Of ◽  
Mechanism Of The Reaction

Dimethyl acetylphosphonate (DAP) is rapidly cleaved in water to acetate and dimethylphosphonic acid. The half time for reaction at pH 7, 25 °C is estimated to be 3 s. The reaction is first order in hydroxide ion concentration and first order in DAP concentration. Rates of reaction were measured over the pH range 3.8 to 6.5 at 25 °C, 6.5 and 7.0 at 5 °C, 4.5 to 6.5 at 35 °C, and 4.5 to 6.0 at 45 °C. The average observed second-order rate constant at 25 °C is 2.4 × 106M−1 s−1. DAP is converted rapidly to a hydrated carbonyl adduct. The mechanism for the formation of the observed products is proposed to be analogous to cleavage reactions of other carbonyl hydrates, proceeding from a monoanion conjugate in this case. The estimated rate constant for the unimolecular cleavage of the carbonyl hydrate anion is 2 × 103 s−1. The rapid hydrolysis of DAP results from energetically favourable formation of a hydrate due to the electronic effect of the phosphonate diester. This effect also promoles ionization of the hydrate. The ionized hydrate readily expels the phosphonate diester to achieve the overall rapid hydrolysis.

Kinetics of Reactions of 8-Quinolinol and Acetate with Hydroxyaluminum Species in Aqueous Solutions. 1. Polynuclear Hydroxyaluminum Cations

1971 ◽  
Vol 49 (10) ◽  
pp. 1683-1687 ◽  
Author(s):  
R. C. Turner ◽  
Wan Sulaiman
Keyword(s):  
Acetic Acid ◽  
Rate Constant ◽  
Empirical Equation ◽  
Decomposition Reaction ◽  
Order Rate Constant ◽  
Acetate Concentration ◽  
First Order ◽  
Order Rate ◽  
Pseudo First Order ◽  
Kinetics Of

The effect of varying 8-quinolinol and acetate concentration on the rate of decomposition of poly-nuclear hydroxyaluminum cations was studied. It was found that the concentration of the undissociated 8-quinolinol and acetic acid molecules determined the magnitude of the first order rate constant for the decomposition of the polynuclear hydroxyaluminum cations, except when the acetate concentrations were relatively high. With high acetate concentrations, it appeared that polynuclear acetate species were involved in the reactions. An empirical equation was developed showing the effect of 8-quinolinol and acetic acid molecule concentrations on the pseudo first order rate constant for the decomposition reaction.

Studies on Horseradish Peroxidase. XI. On the Nature of Compounds I and II as Determined from the Kinetics of the Oxidation of Ferrocyanide

1973 ◽  
Vol 51 (4) ◽  
pp. 582-587 ◽  
Author(s):  
M. L. Cotton ◽  
H. B. Dunford
Keyword(s):  
Horseradish Peroxidase ◽  
Rate Constant ◽  
Active Sites ◽  
Ph Dependence ◽  
Order Rate Constant ◽  
Second Order ◽  
Compound I ◽  
Order Rate ◽  
Compound Ii ◽  
Kinetics Of

In order to investigate the nature of compounds I and II of horseradish peroxidase, the kinetics were studied of ferrocyanide oxidation catalyzed by these compounds which were prepared from three different oxidizing agents. The pH dependence of the apparent second-order rate constant for ferrocyanide oxidation by compound I, prepared from ethyl hydroperoxide and m-chloroperbenzoic acid, was interpreted in terms of an ionization on the enzyme with a pKa = 5.3, identical to that reported previously for hydrogen peroxide. The second-order rate constant for the compound II-ferrocyanide reaction also showed the same pH dependence for the three oxidizing substrates. However, with more accurate results, the compound II-ferrocyanide reaction was reinterpreted in terms of a single ionization with pKa = 8.5. The same dependence of ferrocyanide oxidation on pH suggests structurally identical active sites for compounds I and II prepared from the three different oxidizing substrates.

Sign in / Sign up

Export Citation Format

Share Document