Adsorption at solid-liquid interfaces. II. Models of the electrical double layer at the oxide-solution interface

1973 ◽  
Vol 26 (6) ◽  
pp. 1191 ◽  
Author(s):  
HJL Wright ◽  
RJ Hunter

An extension has been made to Gouy-Stern-Grahame models of the double layer on mineral oxide surfaces.1 In this work and an earlier paper,2 the Stern isotherm is used for adsorption of p.d. ions at the surface. This is essentially an inversion of the modified Nernst equation given by Levine and Smith.3 The development of the surface charge and potential is considered by two different but related methods. Comprehensive calculations show that the zeta potential of oxide systems may be reasonably simulated with such models but the calculated surface charge is much less than that found experimentally. It is suggested that a model in which this surface charge is incorporated into a gel layer may be more appropriate.

2011 ◽  
Vol 684 ◽  
pp. 163-191 ◽  
Author(s):  
Andrew J. Pascall ◽  
Todd M. Squires

AbstractElectrokinetic effects at liquid/liquid interfaces have received considerably less attention than at solid/liquid interfaces. Because liquid/liquid interfaces are generally mobile, one might expect electrokinetic effects over a liquid/liquid interface to be faster than over an equivalent solid surface. The earliest predictions for the electrophoretic mobility of charged mercury drops – distinct approaches by Frumkin, along with Levich, and Booth – differed by $O(a/ {\lambda }_{D} )$, where $a$ is the radius of the drop and ${\lambda }_{D} $ is the Debye length. Seeking to reconcile this rather striking discrepancy, Levine & O’Brien showed double-layer polarization to be the key ingredient. Without a physical mechanism by which electrokinetic effects are enhanced, however, it is difficult to know how general the enhancement is – whether it holds only for liquid metal surfaces, or more generally, for all liquid/liquid surfaces. By considering a series of systems in which a planar metal strip is coated with either a liquid metal or liquid dielectric, we show that the central physical mechanism behind the enhancement predicted by Frumkin is the presence of an unmatched electrical stress upon the electrolyte/liquid interface, which establishes a Marangoni stress on the droplet surface and drives it into motion. The source of the unbalanced electrokinetic stress on a liquid metal surface is clear – metals represent equipotential surfaces, so no field exists to drive an equal and opposite force on the surface charge. This might suggest that liquid metals represent a unique system, since dielectric liquids can support finite electric fields, which might be expected to exert an electrical stress on the surface charge that balances the electric stress. We demonstrate, however, that electrical and osmotic stresses on relaxed double layers internal to dielectric liquids precisely cancel, so that internal electrokinetic stresses generally vanish in closed, ideally polarizable liquids. The enhancement predicted by Frumkin for liquid mercury drops can thus be expected quite generally over ideally polarizable liquid drops. We then reconsider the electrophoretic mobility of spherical drops, and reconcile the approaches of Frumkin and Booth: Booth’s neglect of double-layer polarization leads to a standard electro-osmotic flow, without the enhancement, and Frumkin’s neglect of the detailed double-layer dynamics leads to the enhanced electrocapillary motion, but does not capture the (sub-dominant) electrophoretic motion. Finally, we show that, while the electrokinetic flow over electrodes coated with thin liquid films is $O(d/ {\lambda }_{D} )$ faster than over solid/liquid interfaces, the Dukhin number, $\mathit{Du}$, which reflects the importance of surface conduction to bulk conduction, generally increases by a smaller amount [$O(d/ L)$], where $d$ is the thickness of film and $L$ is the length of the electrode. This suggests that liquid/liquid interfaces may be utilized to enhance electrokinetic velocities in microfluidic devices, while delaying the onset of high-$\mathit{Du}$ electrokinetic suppression.


1973 ◽  
Vol 26 (6) ◽  
pp. 1183 ◽  
Author(s):  
HJL Wright ◽  
RJ Hunter

To facilitate model studies of the double layer at charged surfaces, an analysis is made of the thermodynamics of the dissociation phenomena which take place at mineral oxide surfaces. Two alternative equations may be used to describe the dependence of the surface potential and charge upon the concentration of potential determining ions in the solution. The two different approaches are similar to those given previously1,2 but analysis is made of the specific adsorption potential which is expressed in a form which permits it to be theoretically calculated. While specifically developed for insoluble oxides, the theory is equally applicable to other systems.


1974 ◽  
Vol 27 (3) ◽  
pp. 461 ◽  
Author(s):  
JW Perram ◽  
RJ Hunter ◽  
HJL Wright

We extend previous treatments of the gel model of the oxide-solution interface and solve exactly the most general soluble case, of such an oxide in the presence of a 1 : 2-2 : 1 electrolyte, for the distribution of charge and potential across the interface. We calculate values of the surface charge and zeta potential of the oxides TiO2, Fe2O3, SiO2 and M203 using reasonable values of adsorption potentials and dissociation constants taken from tables. We find, for the samples of such oxides for which high measured charges have been reported, that we can account quantitatively for all the data by characterizing the interface by a gel layer of thickness 20-40�. We infer that such comprehensive agreement, and the consistency in all cases of the high charge and low zeta potential with the theory, gives strong support to the view that a thin surface layer distorted by the penetration of water and all types of ions is a general feature of the oxide-solution interface.


2001 ◽  
Vol 19 (5) ◽  
pp. 397-407 ◽  
Author(s):  
S. Chibowski ◽  
M. Paszkiewicz

In the studies presented, the influence of the molecular weight of polyethylene glycol (PEG) on the adsorption and electrical properties at the metal oxide/polymer solution interface has been determined. The main factors responsible for the observed changes in the zeta potential and surface charge of titania were determined on the basis of the data obtained. It was demonstrated that changes in the ionic structure of the Stern layer depend on the molecular weight of PEG and its conformation. A possible mechanism for the changes in zeta potential both with pH and molecular weight was proposed on the basis of values of the surface charge difference (Δσ0) and the diffuse layer charge difference (Δσd) as determined in the presence and absence of the polymer. The thickness of the adsorption layer (δ) on the surface of titania was calculated from the zeta potential changes, both in the presence and absence of the polymer. A distinct influence of the PEG molecular weight was noted on the values of the adsorption layer thickness (δ) determined. The structures of the macromolecules in solution and at the solid/solution interface were compared and from the dependencies obtained some changes in the shape and dimensions of the polymer coils on passing from the bulk solution to the interface were proposed.


Nanoscale ◽  
2017 ◽  
Vol 9 (36) ◽  
pp. 13527-13537 ◽  
Author(s):  
Yinghua Qiu ◽  
Zuzanna Siwy

Surface charge of particles can be probed via an approach curve of individual particles to a pore.


Sign in / Sign up

Export Citation Format

Share Document