Fluorescence spectrum of phenanthrene single crystal at 4°K

1966 ◽  
Vol 19 (3) ◽  
pp. 415 ◽  
Author(s):  
TN Misra ◽  
AR Lacey ◽  
LE Lyons
Keyword(s):  
Single Crystal ◽  
Single Crystals ◽  
Fluorescence Spectrum ◽  
Vibrational Frequencies

The fluorescence spectrum of anthracene-free phenanthrene single crystals at 4�K has been investigated. The whole spectrum has been analysed in terms of three superimposed spectra, one (weak) originating in a free pure exciton level of the pure phenanthrene crystal and two associated with defects. One of the defect spectra is very strong. All three series can be analysed in terms of similar if not identical vibrational frequencies.

The observation of defects on (100) CdTe surfaces by chemical etching

1992 ◽  
Vol 50 (2) ◽  
pp. 1424-1425
Author(s):  
M.E. Lee
Keyword(s):  
Single Crystal ◽  
Grain Boundaries ◽  
Single Crystals ◽  
Chemical Etching ◽  
Crystalline Perfection ◽  
Crystalline Defects ◽  
High Incidence ◽  
Crystallographic Defects ◽  
Cdznte Substrates ◽  
Device Technology

The crystalline perfection of bulk CdTe substrates plays an important role in their use in infrared device technology. The application of chemical etchants to determine crystal polarity or the density and distribution of crystallographic defects in (100) CdTe is not well understood. The lack of data on (100) CdTe surfaces is a result of the apparent difficulty in growing (100) CdTe single crystal substrates which is caused by a high incidence of twinning. Many etchants have been reported to predict polarity on one or both (111) CdTe planes but are considered to be unsuitable as defect etchants. An etchant reported recently has been considered to be a true defect etchant for CdTe, MCT and CdZnTe substrates. This etchant has been reported to reveal crystalline defects such as dislocations, grain boundaries and inclusions in (110) and (111) CdTe. In this study the effect of this new etchant on (100) CdTe surfaces is investigated.The single crystals used in this study were (100) CdTe as-cut slices (1mm thickness) from Bridgman-grown ingots.

Mounting an individual submicrometer sized single crystal

1996 ◽  
Vol 211 (6) ◽  
Author(s):  
R. B. Neder ◽  
M. Burghammer ◽  
Th. Grasl ◽  
H. Schulz
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Single Crystal ◽  
Single Crystals ◽  
High Vacuum ◽  
Nanometer Resolution ◽  
Micro Manipulator ◽  
Scanning Electron

AbstractWe developed a new micro manipulator for mounting individual sub-micrometer sized single crystals within a scanning electron microscope. The translations are realized via a commercially available piezomicroscope, adapted for high vacuum usage and realize nanometer resolution. With this novel instrument it is routinely possible to mount individual single crystals with sizes down to 0.1

Study of potential oscillations during reaction of an aluminium single crystal with an aqueous KOH solution

1990 ◽  
Vol 55 (2) ◽  
pp. 345-353 ◽  
Author(s):  
Ivan Halaša ◽  
Milica Miadoková
Keyword(s):  
Aqueous Solutions ◽  
Single Crystal ◽  
Single Crystals ◽  
Periodic Potential ◽  
Optimum Conditions ◽  
Potential Oscillations ◽  
Dilute Aqueous Solutions ◽  
Experimental Findings ◽  
Kinetics Of

The authors investigated periodic potential changes measured on oriented sections of Al single crystals during spontaneous dissolution in dilute aqueous solutions of KOH, with the aim to find optimum conditions for the formation of potential oscillations. It was found that this phenomenon is related with the kinetics of the reaction investigated, whose rate also changed periodically. The mechanism of the oscillations is discussed in view of the experimental findings.

Measurement of growth rates for single crystals and pressed tablets of CuSO4.5 H2O on a rotating disc

1989 ◽  
Vol 54 (11) ◽  
pp. 2951-2961 ◽  
Author(s):  
Miloslav Karel ◽  
Jaroslav Nývlt
Keyword(s):  
Growth Rate ◽  
Single Crystal ◽  
Single Crystals ◽  
Growth Rates ◽  
Diffusion Coefficients ◽  
Preferred Orientation ◽  
Rotating Disc ◽  
Dissolution Rates ◽  
Rates Of Growth ◽  
Good Agreement

Measured growth and dissolution rates of single crystals and tablets were used to calculate the overall linear rates of growth and dissolution of CuSO4.5 H2O crystals. The growth rate for the tablet is by 20% higher than that calculated for the single crystal. It has been concluded that this difference is due to a preferred orientation of crystal faces on the tablet surface. Calculated diffusion coefficients and thicknesses of the diffusion and hydrodynamic layers in the vicinity of the growing or dissolving crystal are in good agreement with published values.

scholarly journals Single Crystal Growth and Physical Properties of Pyroxene CoGeO3

Crystals ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 378
Author(s):  
Li Zhao ◽  
Zhiwei Hu ◽  
Hanjie Guo ◽  
Christoph Geibel ◽  
Hong-Ji Lin ◽  
...  
Keyword(s):  
High Pressure ◽  
Magnetic Properties ◽  
Magnetic Susceptibility ◽  
Crystal Growth ◽  
Physical Properties ◽  
Single Crystal ◽  
Single Crystals ◽  
Magnetic Moments ◽  
Single Crystal Growth ◽  
The Impact

We report on the synthesis and physical properties of cm-sized CoGeO3 single crystals grown in a high pressure mirror furnace at pressures of 80 bar. Direction dependent magnetic susceptibility measurements on our single crystals reveal highly anisotropic magnetic properties that we attribute to the impact of strong single ion anisotropy appearing in this system with TN∼33.5 K. Furthermore, we observe effective magnetic moments that are exceeding the spin only values of the Co ions, which reveals the presence of sizable orbital moments in CoGeO3.

scholarly journals Growth of sillenite Bi12FeO20 single crystals: structural, thermal, optical, photocatalytic features and first principle calculations

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Durga Sankar Vavilapalli ◽  
Ambrose A. Melvin ◽  
F. Bellarmine ◽  
Ramanjaneyulu Mannam ◽  
Srihari Velaga ◽  
...  
Keyword(s):  
Single Crystal ◽  
Single Crystals ◽  
Photoelectron Spectroscopy ◽  
Diffraction Method ◽  
Lattice Parameter ◽  
First Principle ◽  
X Ray Diffraction ◽  
X Ray ◽  
First Principle Calculations ◽  
Photodegradation Efficiency

AbstractIdeal sillenite type Bi12FeO20 (BFO) micron sized single crystals have been successfully grown via inexpensive hydrothermal method. The refined single crystal X-ray diffraction data reveals cubic Bi12FeO20 structure with single crystal parameters. Occurrence of rare Fe4+ state is identified via X-ray photoelectron spectroscopy (XPS) and X-ray absorption spectroscopy (XAS). The lattice parameter (a) and corresponding molar volume (Vm) of Bi12FeO20 have been measured in the temperature range of 30–700 °C by the X-ray diffraction method. The thermal expansion coefficient (α) 3.93 × 10–5 K−1 was calculated from the measured values of the parameters. Electronic structure and density of states are investigated by first principle calculations. Photoelectrochemical measurements on single crystals with bandgap of 2 eV reveal significant photo response. The photoactivity of as grown crystals were further investigated by degrading organic effluents such as Methylene blue (MB) and Congo red (CR) under natural sunlight. BFO showed photodegradation efficiency about 74.23% and 32.10% for degrading MB and CR respectively. Interesting morphology and microstructure of pointed spearhead like BFO crystals provide a new insight in designing and synthesizing multifunctional single crystals.

scholarly journals Modeling of magneto-conductivity of bismuth selenide: a topological insulator

2021 ◽  
Vol 3 (4) ◽  
Author(s):  
Yogesh Kumar ◽  
Rabia Sultana ◽  
Prince Sharma ◽  
V. P. S. Awana
Keyword(s):  
Magnetic Field ◽  
Magnetic Fields ◽  
Single Crystal ◽  
Single Crystals ◽  
X Ray Diffraction ◽  
Field Range ◽  
X Ray ◽  
Bulk Carriers ◽  
Different Temperatures

AbstractWe report the magneto-conductivity analysis of Bi2Se3 single crystal at different temperatures in a magnetic field range of ± 14 T. The single crystals are grown by the self-flux method and characterized through X-ray diffraction, Scanning Electron Microscopy, and Raman Spectroscopy. The single crystals show magnetoresistance (MR%) of around 380% at a magnetic field of 14 T and a temperature of 5 K. The Hikami–Larkin–Nagaoka (HLN) equation has been used to fit the magneto-conductivity (MC) data. However, the HLN fitted curve deviates at higher magnetic fields above 1 T, suggesting that the role of surface-driven conductivity suppresses with an increasing magnetic field. This article proposes a speculative model comprising of surface-driven HLN and added quantum diffusive and bulk carriers-driven classical terms. The model successfully explains the MC of the Bi2Se3 single crystal at various temperatures (5–200 K) and applied magnetic fields (up to 14 T).

scholarly journals Growth of single crystals in the (Na1/2Bi1/2)TiO3–(Sr1–xCax)TiO3 system by solid state crystal growth

2021 ◽  
Author(s):  
Phan Gia Le ◽  
Huyen Tran Tran ◽  
Jong-Sook Lee ◽  
John G. Fisher ◽  
Hwang-Pill Kim ◽  
...  
Keyword(s):  
Crystal Growth ◽  
Solid State ◽  
Single Crystal ◽  
Single Crystals ◽  
Piezoelectric Properties ◽  
Single Crystal Growth ◽  
Crystal Growth Rate ◽  
Large Strains ◽  
Growth Technique ◽  
The Matrix

AbstractCeramics based on (Na1/2B1/2)TiO3 are promising candidates for actuator applications because of large strains generated by an electric field-induced phase transition. For example, the (1−x)(Na1/2Bi1/2)TiO3-xSrTiO3 system exhibits a morphotropic phase boundary at x = 0.2–0.3, leading to high values of inverse piezoelectric constant d*33, which can be further improved by the use of single crystals. In our previous work, single crystals of (Na1/2B1/2)TiO3-SrTiO3 and (Na1/2B1/2)TiO3-CaTiO3 were grown by the solid state crystal growth technique. Growth in the (Na1/2B1/2)TiO3-SrTiO3 system was sluggish whereas the (Na1/2B1/2)TiO3-CaTiO3 single crystals grew well. In the present work, 0.8(Na1/2Bi1/2)TiO3-0.2(Sr1−xCax)TiO3 single crystals (with x = 0.0, 0.1, 0.2, 0.3, 0.4) were produced by the solid state crystal growth technique in an attempt to improve crystal growth rate. The dependence of mean matrix grain size, single crystal growth distance, and electrical properties on the Ca concentration was investigated in detail. These investigations indicated that at x = 0.3 the matrix grain growth was suppressed and the driving force for single crystal growth was enhanced. Replacing Sr with Ca increased the shoulder temperature Ts and temperature of maximum relative permittivity Tmax, causing a decrease in inverse piezoelectric properties and a change from normal to incipient ferroelectric behavior.

Two lithium tricyanomethanide compounds: syntheses and single-crystal structure determination of LiK[C(CN)3]2 and Li[C(CN)3]·½ (H3C)2CO

2015 ◽  
Vol 70 (3) ◽  
pp. 191-196 ◽  
Author(s):  
Olaf Reckeweg ◽  
Francis J. DiSalvo
Keyword(s):  
Crystal Structure ◽  
Single Crystal ◽  
Single Crystals ◽  
Structure Determination ◽  
Monoclinic Space Group ◽  
Orthorhombic Space Group ◽  
Space Group ◽  
Cell Parameters ◽  
New Compounds

AbstractThe new compounds LiK[C(CN)3]2 and Li[C(CN)3]·½ (H3C)2CO were synthesized and their crystal structures were determined. Li[C(CN)3]·½ (H3C)2CO crystallizes in the orthorhombic space group Ima2 (no. 46) with the cell parameters a=794.97(14), b=1165.1(2) and c=1485.4(3) pm, while LiK[C(CN)3]2 adopts the monoclinic space group P21/c (no. 14) with the cell parameters a=1265.7(2), b=1068.0(2) and c=778.36(12) pm and the angle β=95.775(7)°. Single crystals of K[C(CN)3] were also acquired, and the crystal structure was refined more precisely than before corroborating earlier results.

Critical Current of Bi-2212 Single Crystal by Doping Oxides as a Pinning Center

2014 ◽  
Vol 95 ◽  
pp. 175-180
Author(s):  
Takuya Agou ◽  
Hiroya Imao
Keyword(s):  
Rare Earth ◽  
Single Crystal ◽  
Single Crystals ◽  
Crystal Surface ◽  
Rare Earth Oxides ◽  
Pinning Centers ◽  
Current Path ◽  
Pinning Center ◽  
Superconducting Current ◽  
A Current

It is necessary to formpinning centers in superconductors to allow the flow of large currents throughthe specimens. To clarify the properties of pinning centers, it is preferableto investigate single crystals. In this study, heat treatment was used to dopevarious oxides into Bi2Sr2CaCu2Ox(Bi-2212) single crystals prepared by self-flux methods and the criticalcurrent (Ic) was measured. The oxides used in this study were Al2O3and the rare earth oxides Er2O3and Nd2O3. At 77K, Nd2O3and Er2O3 are magnetic, whereas Al2O3is nonmagnetic. The Ic of the samples were measured as a current per width of 1cm (Ics). The resulting Ics of the Bi-2212 single crystal was 2.8A/cm and thatof the Al2O3 doped Bi-2212 sample was 4.5A/cm. Comparedwith these samples, doping the other rare earth oxides gave Ics values inexcess 10A/cm. The results indicated that the doping oxides were effective inoperating as pinning centers in the samples. We assumed the current path in asingle crystal, and calculated the Ics by superconducting current simulation.The results indicated that the oxides permeated from a crystal surface in aporous shape. The oxides increase the current which flow in the Cu-O2planes that are parallel to the a-b plane.

Sign in / Sign up

Export Citation Format

Share Document