Atomic Force Microscopy Imaging of Glucose Oxidase using Chemically Modified Tips

2003 ◽  
Vol 56 (10) ◽  
pp. 1039 ◽  
Author(s):  
Dusan Losic ◽  
Ken Short ◽  
Joe G. Shapter ◽  
Justin J. Gooding
Keyword(s):  
Atomic Force Microscopy ◽  
Glucose Oxidase ◽  
Self Assembled Monolayer ◽  
Microscopy Imaging ◽  
Force Microscopy ◽  
Chemically Modified ◽  
Atomic Force ◽  
Hydrophilic Nature ◽  
Assembled Monolayers ◽  
Self Assembled

Atomic force microscopy (AFM) tips have been chemically modified using a variety of approaches mostly based on self-assembled monolayers (SAMs). Tips with both a hydrophobic and hydrophilic nature have been prepared and used to image glucose oxidase covalently attached to a self-assembled monolayer.

Atomic Force Microscopy Studies of Aluminum Corrosion Inhibition by Adsorbed Self Assembled Monolayers

1997 ◽  
Vol 3 (S2) ◽  
pp. 1263-1264
Author(s):  
John F. Richards ◽  
E. Barry Troughton ◽  
Richard A. Dennis ◽  
Phillip E. Russell
Keyword(s):  
Atomic Force Microscopy ◽  
Native Oxide ◽  
Self Assembled Monolayer ◽  
Adsorption Time ◽  
Force Microscopy ◽  
Atomic Force ◽  
Phase Images ◽  
Assembled Monolayers ◽  
Aluminum Corrosion ◽  
Self Assembled

Atomic force microscopy (AFM) studies on the microstructure of the phosphonic acid (PA) / Al (with native oxide) self assembled monolayer (SAM) system (a possible corrosion resistant coating interface monolayer) has been evaluated as a function of molecular chain length and processing conditions (i.e. adsorption time) in previous works. It was apparent from the AFM topography and phase images of the monolayer microstructure that the octadecylphosphonic acid (OPA) monolyer was the most conformal and showed little dependence on adsorption time (for times ≤ 24 hours). It was therefore chosen as the most promising monolayer compound of the PA/A1 system with which to study corrosion inhibiting properties.In this present work, AFM is used to study the corrosion inhibiting ability of OPA SAMs on aluminum, and also to investigate the “nucleation” and progression of Al corrosion and oxide formation in water at the nanometer level; with and without SAM passivation.

Comparative Study of Field Emission-Scanning Electron Microscopy and Atomic Force Microscopy to Assess Self-assembled Monolayer Coverage on Any Type of Substrate

1999 ◽  
Vol 5 (6) ◽  
pp. 413-419 ◽  
Author(s):  
Bernardo R.A. Neves ◽  
Michael E. Salmon ◽  
Phillip E. Russell ◽  
E. Barry Troughton
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Atomic Force Microscopy ◽  
Comparative Study ◽  
Field Emission ◽  
Self Assembled Monolayer ◽  
Force Microscopy ◽  
Atomic Force ◽  
Self Assembled ◽  
Scanning Electron

Abstract: In this work, we show how field emission–scanning electron microscopy (FE-SEM) can be a useful tool for the study of self-assembled monolayer systems. We have carried out a comparative study using FE-SEM and atomic force microscopy (AFM) to assess the morphology and coverage of self-assembled monolayers (SAM) on different substrates. The results show that FE-SEM images present the same qualitative information obtained by AFM images when the SAM is deposited on a smooth substrate (e.g., mica). Further experiments with rough substrates (e.g., Al grains on glass) show that FE-SEM is capable of unambiguously identifying SAMs on any type of substrate, whereas AFM has significant difficulties in identifying SAMs on rough surfaces.

Self-assembled monolayers of sulfonate-terminated alkanethiols investigated by frequency modulation atomic force microscopy in liquid

2017 ◽  
Vol 28 (45) ◽  
pp. 455603 ◽  
Author(s):  
Hitoshi Asakawa ◽  
Natsumi Inada ◽  
Kaito Hirata ◽  
Sayaka Matsui ◽  
Takumi Igarashi ◽  
...  
Keyword(s):  
Atomic Force Microscopy ◽  
Frequency Modulation ◽  
Self Assembled Monolayers ◽  
Force Microscopy ◽  
Atomic Force ◽  
Assembled Monolayers ◽  
Self Assembled

Mechanical Properties of Oligothiophene Self Assembled Films by Atomic Force Microscopy.

2005 ◽  
Vol 871 ◽  
Author(s):  
Imma Ratera ◽  
Jinyu Chen ◽  
Amanda Murphy ◽  
Frank Ogletree ◽  
Jean M. J. Fréchet ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Atomic Force Microscopy ◽  
Self Assembled Monolayers ◽  
Force Microscopy ◽  
Atomic Force ◽  
Structure Of Molecules ◽  
Cell Dimensions ◽  
Assembled Monolayers ◽  
Self Assembled ◽  
Unit Cell Dimensions

AbstractThe oligothiophene derivative (4-(5″″-tetradecyl-[2,2′;5′,2″;5″,2″′;5″′,2″″] pentathiophen-5-yl)-butyric acid (C14-5TBA) was synthesized and the structural and mechanical properties of self-assembled monolayers on mica have been studied by atomic force microscopy (AFM). The films were prepared by drop casting a dilute THF solution (1mM) of the oligothiphene on mica. Islands containing primarily monolayers with a very small percentage of multilayers were formed. The molecules adsorb through the carboxylic group, and expose the alkyl chain (CH2)13CH3. High resolution AFM scans reveal a well ordered structure of molecules with unit cell dimensions of 0.65 and 0.46 nm. Applying load to the tip, the molecular film was gradually compressed from an initial height of 4.1nm to a final one of 2.6 nm, corresponding to atilt of the alkyl chains. In regions covered with bilayers the molecules in the second layer were oriented opposite to those in the first layer, thus exposing the carboxylic end group to the air. These second layer was easily removed as the tip pressure increased.

Lattice Structure of Self-Assembled Monolayers of Dialkyl Sulfides and Calix[4]arene Sulfide Adsorbates on Au(111) Revealed by Atomic Force Microscopy

Langmuir ◽  
1999 ◽  
Vol 15 (17) ◽  
pp. 5541-5546 ◽  
Author(s):  
Holger Schönherr ◽  
G. Julius Vancso ◽  
Bart-Hendrik Huisman ◽  
Frank C. J. M. van Veggel ◽  
David N. Reinhoudt
Keyword(s):  
Atomic Force Microscopy ◽  
Lattice Structure ◽  
Self Assembled Monolayers ◽  
Force Microscopy ◽  
Atomic Force ◽  
Assembled Monolayers ◽  
Self Assembled ◽  
Dialkyl Sulfides
Sign in / Sign up

Export Citation Format

Share Document