scholarly journals The Structure and Plastic Properties of the Cell Wall of Nitella in Relation to Extension Growth

1966 ◽  
Vol 19 (3) ◽  
pp. 439 ◽  
Author(s):  
MC Probine ◽  
NF Barber
Keyword(s):  
Mechanical Properties ◽  
Cell Wall ◽  
Cell Growth ◽  
Elastic Properties ◽  
Cell Shape ◽  
Cellulose Microfibrils ◽  
Theoretical Treatment ◽  
Plastic Properties ◽  
Growing Cell ◽  
Plastic Matrix

The internodal cells of Nitella opaca L. have been used in earlier studies to assess the part which mechanical properties of the wall may play in the control of cell growth (Probine and Preston 1962). The wall is mechanically anisotropic in both its plastic and elastic properties, and it is shown in this paper by an approximate theoretical treatment that a mat of cellulose microfibrils, embedded in a plastic matrix and having a distribution in the plane of the wall like that observed in Nitella, would lead to longitUdinal and transverse plastic extensions in the ratio observed in the growing cell. Factors which would affect cell shape are discussed.

scholarly journals KATANIN-dependent mechanical properties of the stigmatic cell wall mediate the pollen tube path in Arabidopsis

eLife ◽  
2020 ◽  
Vol 9 ◽  
Author(s):  
Lucie Riglet ◽  
Frédérique Rozier ◽  
Chie Kodera ◽  
Simone Bovio ◽  
Julien Sechet ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Cell Wall ◽  
Pollen Tube ◽  
Cell Walls ◽  
Cell Shape ◽  
Pollen Tubes ◽  
Mechanical Anisotropy ◽  
Cellulose Microfibrils ◽  
Cortical Microtubules ◽  
Isotropic Reorientation

Successful fertilization in angiosperms depends on the proper trajectory of pollen tubes through the pistil tissues to reach the ovules. Pollen tubes first grow within the cell wall of the papilla cells, applying pressure to the cell. Mechanical forces are known to play a major role in plant cell shape by controlling the orientation of cortical microtubules (CMTs), which in turn mediate deposition of cellulose microfibrils (CMFs). Here, by combining imaging, genetic and chemical approaches, we show that isotropic reorientation of CMTs and CMFs in aged Col-0 and katanin1-5 (ktn1-5) papilla cells is accompanied by a tendency of pollen tubes to coil around the papillae. We show that this coiled phenotype is associated with specific mechanical properties of the cell walls that provide less resistance to pollen tube growth. Our results reveal an unexpected role for KTN1 in pollen tube guidance on the stigma by ensuring mechanical anisotropy of the papilla cell wall.

Chemical control of plant cell wall structure and of cell shape

1965 ◽  
Vol 161 (985) ◽  
pp. 526-537 ◽  
Keyword(s):  
Cell Wall ◽  
Elastic Properties ◽  
Cell Shape ◽  
Plant Cell Wall ◽  
Sucrose Solution ◽  
Longitudinal Axis ◽  
Cell Wall Structure ◽  
Cellulose Microfibrils ◽  
Wall Structure ◽  
Cortical Cells

It has been shown by Galston, Baker & King (1953) that, if sub-apical sections of pea epicotyl are floated on a sucrose solution containing an appropriate indole acetic acid ( IAA ) concentration, the sections will elongate considerably. If benzimidazole (BIA) is added in addition to the auxin there is a narrow concentration range of BIA over which elongation is strongly inhibited, while increase in section diameter is actually enhanced. This increase in diameter is due specifically to an increase in diameter of the cortical cells. It is shown in this paper that the cortical cells in tissues which have been induced to increase in diameter have a different wall structure from cortical cells in tissues which have increased mainly in length. In the latter case the cellulose microfibrils are arranged transversely to the longitudinal axis of the cell, but, in cells which have increased mainly in diameter, there are two distinct microfibrillar components: a transverse set of microfibrils, and organized bands of longitudinally oriented microfibrils on the outside of the cell wall. The structure of the wall and its plastic and elastic properties are discussed in relation to the way in which the wall may determine the shape of the cell. It is pointed out that changes in cell shape which result from alteration of the chemical environment of the cell could be explained by modification of the plastic and elastic properties of the wall due to change in wall structure. This hypothesis supports the idea that plasticity of the cell wall is an important factor in extension growth and also suggests that the arrangement of microfibrils plays an important part in determining the shape of the cell. If this hypothesis is correct it may have considerable bearing upon the mechanism of cell and tissue differentiation. The observed changes in cell wall structure favour the view that microfibril orientation is controlled through the agency of the protoplasm. The occurrence of bands of longitudinal microfibrils on the outside of the cell wall suggests that cellulose microfibrils can be laid down remote from the cytoplasm.

A fibre-reinforced fluid model of anisotropic plant cell growth

2010 ◽  
Vol 655 ◽  
pp. 472-503 ◽  
Author(s):  
R. J. DYSON ◽  
O. E. JENSEN
Keyword(s):  
Cell Wall ◽  
Cell Growth ◽  
Fluid Model ◽  
Turgor Pressure ◽  
Cellulose Microfibrils ◽  
Wall Material ◽  
Primary Cell Wall ◽  
Growing Cell ◽  
Asymptotic Reduction ◽  
Simple Sets

Many growing plant cells undergo rapid axial elongation with negligible radial expansion. Growth is driven by high internal turgor pressure causing viscous stretching of the cell wall, with embedded cellulose microfibrils providing the wall with strongly anisotropic properties. We present a theoretical model of a growing cell, representing the primary cell wall as a thin axisymmetric fibre-reinforced viscous sheet supported between rigid end plates. Asymptotic reduction of the governing equations, under simple sets of assumptions about the fibre and wall properties, yields variants of the traditional Lockhart equation, which relates the axial cell growth rate to the internal pressure. The model provides insights into the geometric and biomechanical parameters underlying bulk quantities such as wall extensibility, and shows how either dynamical changes in wall material properties or passive fibre reorientation may suppress cell elongation.

scholarly journals Mechanical properties of the stigmatic cell wall mediate pollen tube path in Arabidopsis

2018 ◽  
Author(s):  
Lucie Riglet ◽  
Frédérique Rozier ◽  
Chie Kodera ◽  
Isabelle Fobis-Loisy ◽  
Thierry Gaude
Keyword(s):  
Cell Wall ◽  
Pollen Tube ◽  
Cell Shape ◽  
Cell Imaging ◽  
Pollen Tubes ◽  
Mechanical Anisotropy ◽  
Cellulose Microfibrils ◽  
Mechanical Forces ◽  
Cortical Microtubules ◽  
Isotropic Reorientation

ABSTRACTSuccessful fertilization in angiosperms depends on the proper trajectory of pollen tubes through the pistil tissues to reach the ovules. Pollen tubes first grow within the cell wall of the papilla cells, applying pressure to the cell. Mechanical forces are known to play a major role in plant cell shape by controlling the orientation of cortical microtubules (CMTs), which in turn mediate deposition of cellulose microfibrils (CMFs). Here, by combining cell imaging and genetic approaches, we show that isotropic reorientation of CMTs and CMFs in aged and katanin1-5 (ktn1-5) papilla cells is accompanied by a tendency of pollen tubes to coil around the papillae. Furthermore, we uncover that aged and ktn1-5 papilla cells have a softer cell wall and provide less resistance to pollen tube growth. Our results reveal an unexpected role for KTN1 in pollen tube guidance by ensuring mechanical anisotropy of the papilla cell wall.

scholarly journals Bacterial envelope damage inflicted by bioinspired nanospikes grown in a hydrogel

2020 ◽  
Author(s):  
Sandra L. Arias ◽  
Joshua Devorkin ◽  
Jessica C. Spear ◽  
Ana Civantos ◽  
Jean Paul Allain
Keyword(s):  
Mechanical Properties ◽  
Antimicrobial Activity ◽  
Cell Wall ◽  
Mammalian Cells ◽  
Cell Shape ◽  
Rational Design ◽  
Bacterial Cells ◽  
Nanoscale Structures ◽  
Gram Positive Bacteria ◽  
Tissue Restoration

AbstractDevice-associated infections are one of the deadliest complications accompanying the use of biomaterials, and despite recent advances in the development of anti-biofouling strategies, biomaterials that exhibit both functional tissue restoration and antimicrobial activity have been challenging to achieve. Here, we report the fabrication of bio-inspired bactericidal nanospikes in bacterial cellulose and investigate the mechanism underlying this phenomenon. We demonstrate these structures affects preferentially stiff membranes like those in Gram-positive bacteria, but exhibit cytocompatibility towards mammalian cells, a requisite for tissue restoration. We also reveal the bactericidal activity of the nanospikes is due to a pressure-induced mechanism, which depends on the cell’s adherence time, nanospike’s geometry and spacing, cell shape, and mechanical properties of the cell wall. Our findings provide a better understanding of the mechanobiology of bacterial cells at the interface with nanoscale structures, which is fundamental for the rational design bactericidal topographies.

scholarly journals Endopeptidase regulation as a novel function of the Zur-dependent zinc starvation response

2018 ◽  
Author(s):  
Shannon G. Murphy ◽  
Laura Alvarez ◽  
Myfanwy C. Adams ◽  
Shuning Liu ◽  
Joshua S. Chappie ◽  
...  
Keyword(s):  
Cell Wall ◽  
Cell Growth ◽  
Vibrio Cholerae ◽  
Diarrheal Disease ◽  
Zinc Homeostasis ◽  
Regulatory Control ◽  
Starvation Response ◽  
Antibiotic Development ◽  
Human Host ◽  
Growing Cell

AbstractThe cell wall is a strong, yet flexible, meshwork of peptidoglycan (PG) that gives a bacterium structural integrity. To accommodate a growing cell, the wall is remodeled by both PG synthesis and degradation.Vibrio choleraeencodes a group of three nearly identical zinc-dependent endopeptidases (EPs) that hydrolyze PG to facilitate cell growth. Two of these (shyAandshyC) are housekeeping genes and form a synthetic lethal pair, while the third (shyB) is not expressed under standard laboratory conditions. To investigate the role of ShyB, we conducted a transposon screen to identify mutations that activateshyBtranscription. We found thatshyBis induced as part of the Zur-mediated zinc starvation response, a mode of regulation not previously reported for cell wall lytic enzymes.In vivo, ShyB alone was sufficient to sustain cell growth in low-zinc environments.In vitro, ShyB retained its D,D-endopeptidase activity against purified sacculi in the presence of the metal chelator EDTA at a concentration that inhibits ShyA and ShyC. This suggests that ShyB can substitute for the other EPs during zinc starvation, a condition that pathogens encounter while infecting a human host. Our survey of transcriptomic data from diverse bacteria identified other candidate Zur-regulated endopeptidases, suggesting that this adaptation to zinc starvation is conserved in other Gram-negative bacteria.ImportanceThe human host sequesters zinc and other essential metals in order to restrict growth of potentially harmful bacteria. In response, invading bacteria express a set of genes enabling them to cope with zinc starvation. InVibrio cholerae, the causative agent of the diarrheal disease cholera, we have identified a novel member of this zinc starvation response: a cell wall hydrolase that retains function in low-zinc environments and is conditionally essential for cell growth. Other human pathogens contain homologs that appear to be under similar regulatory control. These findings are significant because they represent, to our knowledge, the first evidence that zinc homeostasis influences cell wall turnover. Anti-infective therapies commonly target the bacterial cell wall and, therefore, an improved understanding of how the cell wall adapts to host-induced zinc starvation could lead to new antibiotic development. Such therapeutic interventions are required to combat the rising threat of drug resistant infections.

scholarly journals Tol-Pal System and Rgs Proteins Interact to Promote Unipolar Growth and Cell Division in Sinorhizobium meliloti

mBio ◽  
2020 ◽  
Vol 11 (3) ◽  
Author(s):  
Elizaveta Krol ◽  
Hamish C. L. Yau ◽  
Marcus Lechner ◽  
Simon Schäper ◽  
Gert Bange ◽  
...  
Keyword(s):  
Cell Wall ◽  
Cell Division ◽  
Cell Growth ◽  
Cell Elongation ◽  
Sinorhizobium Meliloti ◽  
Rgs Proteins ◽  
Polar Growth ◽  
Content Type ◽  
Cell Pole ◽  
Growing Cell

ABSTRACT Sinorhizobium meliloti is an alphaproteobacterium belonging to the Rhizobiales. Bacteria from this order elongate their cell wall at the new cell pole, generated by cell division. Screening for protein interaction partners of the previously characterized polar growth factors RgsP and RgsM, we identified the inner membrane components of the Tol-Pal system (TolQ and TolR) and novel Rgs (rhizobial growth and septation) proteins with unknown functions. TolQ, Pal, and all Rgs proteins, except for RgsE, were indispensable for S. meliloti cell growth. Six of the Rgs proteins, TolQ, and Pal localized to the growing cell pole in the cell elongation phase and to the septum in predivisional cells, and three Rgs proteins localized to the growing cell pole only. The putative FtsN-like protein RgsS contains a conserved SPOR domain and is indispensable at the early stages of cell division. The components of the Tol-Pal system were required at the late stages of cell division. RgsE, a homolog of the Agrobacterium tumefaciens growth pole ring protein GPR, has an important role in maintaining the normal growth rate and rod cell shape. RgsD is a periplasmic protein with the ability to bind peptidoglycan. Analysis of the phylogenetic distribution of the Rgs proteins showed that they are conserved in Rhizobiales and mostly absent from other alphaproteobacterial orders, suggesting a conserved role of these proteins in polar growth. IMPORTANCE Bacterial cell proliferation involves cell growth and septum formation followed by cell division. For cell growth, bacteria have evolved different complex mechanisms. The most prevalent growth mode of rod-shaped bacteria is cell elongation by incorporating new peptidoglycans in a dispersed manner along the sidewall. A small share of rod-shaped bacteria, including the alphaproteobacterial Rhizobiales, grow unipolarly. Here, we identified and initially characterized a set of Rgs (rhizobial growth and septation) proteins, which are involved in cell division and unipolar growth of Sinorhizobium meliloti and highly conserved in Rhizobiales. Our data expand the knowledge of components of the polarly localized machinery driving cell wall growth and suggest a complex of Rgs proteins with components of the divisome, differing in composition between the polar cell elongation zone and the septum.

scholarly journals Tol-Pal system and Rgs proteins interact to promote unipolar growth and cell division in Sinorhizobium meliloti

2020 ◽  
Author(s):  
Elizaveta Krol ◽  
Hamish C. L. Yau ◽  
Marcus Lechner ◽  
Simon Schäper ◽  
Gert Bange ◽  
...  
Keyword(s):  
Cell Wall ◽  
Cell Division ◽  
Cell Growth ◽  
Cell Elongation ◽  
Sinorhizobium Meliloti ◽  
Normal Growth ◽  
Rgs Proteins ◽  
Polar Growth ◽  
Cell Pole ◽  
Growing Cell

ABSTRACTSinorhizobium meliloti is an α-proteobacterium belonging to the Rhizobiales. Bacteria from this order elongate their cell wall at the new cell pole, generated by cell division. Screening for protein interaction partners of the previously characterized polar growth factors RgsP and RgsM, we identified the inner membrane components of the Tol-Pal system (TolQ and TolR) and novel Rgs (rhizobial growth and septation) proteins with unknown functions. TolQ, Pal and all Rgs proteins, except for RgsE, were indispensable for S. meliloti cell growth. Six of the Rgs proteins, TolQ and Pal localized to the growing cell pole in the cell elongation phase and to the septum in pre-divisional cells, and three Rgs proteins localized to growing cell pole only. The FtsN-like protein RgsS contains a conserved SPOR domain and is indispensable at the early stages of cell division. The components of the Tol-Pal system were required at the late stages of cell division. RgsE, a homolog of the Agrobacterium tumefaciens growth pole ring protein GPR, has an important role in maintaining the normal growth rate and rod cell shape. RgsD is a novel periplasmic protein with the ability to bind peptidoglycan. Analysis of the phylogenetic distribution of novel Rgs proteins showed that they are conserved in Rhizobiales and mostly absent from other α-proteobacterial orders, suggesting a conserved role of these proteins in polar growth.IMPORTANCEBacterial cell proliferation involves cell growth and septum formation followed by cell division. For cell growth, bacteria have evolved different complex mechanisms. The most prevalent growth mode of rod shaped bacteria is cell elongation by incorporating new peptidoglycan in a dispersed manner along the sidewall. A small share of rod-shaped bacteria, including the α-proteobacterial Rhizobiales, grow unipolarly. Here, we identified and initially characterized a set of Rgs (rhizobial growth and septation) proteins, which are involved in cell division and unipolar growth of Sinorhizobium meliloti and highly conserved in Rhizobiales. Our data expand the knowledge of components of the polarly localized machinery driving cell wall growth and suggest a complex of Rgs proteins with components of the divisome, differing in composition between the polar cell elongation zone and the septum.

Sign in / Sign up

Export Citation Format

Share Document