scholarly journals Resistivity structures of western Victoria, Australia from 2D and 3D modelling of magnetotelluric data

2015 ◽  
Vol 2015 (1) ◽  
pp. 1-3
Author(s):  
Sahereh Aivazpourporgou ◽  
Naser Meqbel ◽  
Stephan Thiel ◽  
Louis Moresi ◽  
Patrick Hayman ◽  
...  
Author(s):  
Eduardo Oliva ◽  
Manuel Cotelo ◽  
Pablo Martínez ◽  
Jorge Álvarez ◽  
Pedro Velarde
Keyword(s):  
X Rays ◽  

Author(s):  
David W. Price ◽  
Ernest J. Harris ◽  
Frances G. Daykin

Abstract JeMMA, a set of relatively simple shaped-charge devices, has been designed in order to generate suitable data on jet formation, break-up and penetration for code validation purposes. The JeMMA Phase 1 device incorporated a copper liner and six of these shaped charges were manufactured as a technology demonstrator and fired in a special shaped charge facility in December 2016. The radiographic results obtained from the JeMMA Phase 1 and 2 devices, along with data reproducibility between trials, was excellent. This report gives an overview of the Phase 1 and 2 trials, including device design, the results of the firings conducted in Switzerland and details of the subsequent 2D and 3D hydrocode modelling carried out at AWE. The agreement between the data and both 2D and 3D modelling of the experiments is very pleasing, but highlights where further work is required. These JeMMA experiments will enhance the body of relevant data required to provide the validation of the hydrocode materials and modelling methodologies and enable us to better model the jetting threats of our experiments and have higher confidence in the results of the modelling.


2022 ◽  
Vol 2022 ◽  
pp. 1-19
Author(s):  
Szymon Oryński ◽  
Waldemar Jóźwiak ◽  
Krzysztof Nowożyński ◽  
Wojciech Klityński

This study’s main objective is to better define and understand results for the most commonly used inversion algorithms in magnetotelluric data interpretation as part of geological exploration of the region of the Dolsk fault and the Odra fault. The data obtained from the eastern part of Fore-Sudetic Monocline measurements were used to describe the boundaries of lithospheric blocks (terranes) and recognize their origin. The magnetotelluric (MT) soundings were carried out to achieve this goal. There were conducted 51 soundings on five quasiparallel profiles. That allows constructing a quasiregular mesh in the area of the Fore-Sudetic Monocline. This arrangement of the measuring grid allowed reducing the influence of the largest sources of disturbances on MT data. 1D and 2D models were created by using the inverse algorithms. The models were prepared for each profile separately. Further, parallel (ModEM) 3D inversion codes were applied. The area where the investigation was done involves the region of the Dolsk fault and the Odra fault. These zones are essential geologic borders of a regional nature, and they pull apart the crust blocks with different origins. It was vitally needed to correctly identify the crust and upper mantle structure around a part of the Fore-Sudetic Monocline. The paper shows how these key features of the geological structures are revealed using 1D, 2D, and 3D algorithms.


2004 ◽  
Vol 44 (1) ◽  
pp. 93 ◽  
Author(s):  
T. Fujii ◽  
G.W. O’Brien ◽  
P. Tingate ◽  
G. Chen

2D and 3D basin models have been constructed of the southern and central parts of the Vulcan Sub-basin region, in the Timor Sea. This work was carried out to better elucidate the petroleum migration and accumulation histories, and exploration potential, of the region.2D/3D modelling in the Swan Graben indicates that horizontal and downward oil expulsion from the source rocks of the Late Jurassic Lower Vulcan Formation into the Plover Formation sandstone was active from the Early Cretaceous to the present day. Oil migration from the Lower Vulcan Formation into the Late Cretaceous Puffin Formation sands in the Puffin field was simulated by lateral migration along the bottom of an Upper Vulcan Formation seal and by vertical migration above the seal edge. Modelling also indicates that Late Jurassic sequences over the Montara Terrace are thermally immature, and did not contribute to the hydrocarbon accumulations in the region. On the other hand, 3D modelling results indicate that Middle Jurassic Plover Formation in the Montara Terrace became thermally mature after the Pliocene and hence it could contribute both to the hydrocarbon accumulations and the overall hydrocarbon inventory in the area.In the southern Cartier Trough, the Lower Vulcan Formation is typically at a lower thermal maturity than that seen in the Swan Graben, due to a combination of a relatively recent (Pliocene) enhanced burial history and a thinner Lower Vulcan Formation. Here, horizontal and downward oil/gas expulsion from the Lower Vulcan Formation into the Plover Formation sandstone was active from the Late Tertiary to present day, which is significantly later than the expulsion in the Swan Graben. Oil migration from the Lower Vulcan Formation into the Jabiru structure via the Plover Formation carrier bed, was simulated in both 2D and 3D modelling. In particular, 3D modelling simulated oil migration into the Jabiru structure, not only from the southern Cartier Trough after the Miocene, but also early migration from the northern Swan Graben in the Early Cretaceous.In the central Cartier Trough, the areal extent of both generation and expulsion increased as a result of rapid subsidence from about 5 Ma to present day. This Pliocene loading has resulted in the rapid maturation of the Early to Middle and Late Jurassic source system, and expulsion of oil very recently.


2019 ◽  
Author(s):  
STEPHEN CLEE ◽  
SHUNQI PAN
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document