The field pea crop in S.W. Australia. I. Patterns of growth, biomass production and photosynthetic performance in genotypes of contrasting morphology

1994 ◽  
Vol 45 (7) ◽  
pp. 1347 ◽  
Author(s):  
EL Armstrong ◽  
JS Pate
Keyword(s):  
Growth Rate ◽  
Dry Matter ◽  
Co2 Exchange ◽  
Photosynthetic Performance ◽  
Dry Matter Accumulation ◽  
Assimilation Rate ◽  
Area Index ◽  
Green Area ◽  
Co2 Exchange Rate ◽  
Net Assimilation

Biological yield and photosynthetic performance of six field pea genotypes of contrasting foliar morphology and growth habit were studied in a water-limited field environment at Wongan Hills, Western Australia. Dundale and Wirrega were tall, indeterminate, scrambling and conventionally leaved; Dinkum, L82 and L80 (semi-leafless) and Progreta (tare-leaved) were semi-dwarf and more erect. Green area index (green leaf area per unit of ground area), green area duration (time integral of green area), crop growth rate (rate of dry matter accumulation per unit ground area) during early spring, net photosynthetic rate (CO2 exchange rate per unit green area or unit green weight) and net assimilation rate (rate of dry matter accumulation per unit green area) all influenced crop productivity. Shoot and root biomass was highest in Wirrega, due mainly to superior green area index, extended green area duration and maintenance of high growth rate during pod fill. Inverse relationships amongst genotypes were evident between green area index and net assimilation rate, and between green area index and CO2 exchange rate of green area. Total net photosynthesis of the tendrils of semi-leafless types was similar to that of leaflets of conventional types, due mainly to larger biomass of tendrils compensating for poor photosynthetic rates. The poor growth of semi-leafless and tare-leaved types was attributed to lower vigour, green area, ground cover and photosynthate production. Future selection of such types for water-limited environments should concentrate on increasing shoot height, node number per plant, stipule and tendril size and photosynthetic efficiency of green area.

Evaluation of groundnut genotypes for physiological efficiencyand high yield to suit early kharif situation

2017 ◽  
Author(s):  
A. Reshma ◽  
P. Latha ◽  
V. Umamahesh ◽  
R. P. Vasanthi ◽  
P. Sudhakar
Keyword(s):  
Growth Rate ◽  
Dry Matter ◽  
Crop Growth ◽  
Net Assimilation Rate ◽  
Physiological Traits ◽  
Assimilation Rate ◽  
Area Index ◽  
Crop Growth Rate ◽  
Pod Yield ◽  
Net Assimilation

Groundnut is grown during July to October in kharif season, however area under early kharif (sowing in May) is increasing in Andhra Pradsh, where ever irrigation facilities exists. Hence to identify suitable variety for the situation, fourteen pre release and two released groundnut genotypes were evaluated during early kharif 2013 for growth, physiological traits and yield attributes. At harvest genotypes TCGS-1375 (41.331 g plant-1), TCGS-1342(41.059 g plant-1) significantly recorded higher total dry matter compared to all other cultivars and checks followed by TCGS-1330 (36.667 g plant-1), TCGS-1349 (36.433 g plant-1). TCGS-1342 recorded significantly higher Crop Growth Rate (CGR) value of 33.848 g m-2 day-1, where as TCGS-1346 (0.1265 g dm-2 day-1) and TCGS-1330 (0.1262 g dm-2 day-1) recorded significantly higher Net Assimilation Rate (NAR) values at 45-60 DAS. Cultivar, TCGS-1330 recorded significantly higher pod yield 4210.44 Kg ha-1 compared to other entries and checks. The results revealed that pre release genotypes, TCGS-1342, TCGS-1375, TCGS-1330, TCGS-1346 recorded high physiological efficiency in terms of growth and physiological traits viz. total dry matter (TDM), crop growth rate (CGR), net assimilation rate (NAR) and leaf area index (LAI) and also recorded high pod yield.

scholarly journals Effects of Mechanically Transplanting Methods and Planting Densities on Yield and Quality of Nanjing 2728 under Rice-Crayfish Continuous Production System

Agronomy ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 488
Author(s):  
Zhi Dou ◽  
Yangyang Li ◽  
Halun Guo ◽  
Linrong Chen ◽  
Junliang Jiang ◽  
...  
Keyword(s):  
Production System ◽  
Dry Matter ◽  
Continuous Production ◽  
Net Assimilation Rate ◽  
Planting Density ◽  
Dry Matter Accumulation ◽  
Assimilation Rate ◽  
Area Index ◽  
Yield And Quality ◽  
Net Assimilation

Rice–crayfish continuous production system offers high economic and ecology benefits, which developed rapidly in China. To investigate the effects of different mechanical transplanting methods and planting densities on rice yield and quality, Nanjing 2728 was used to determine rice growth performance under mechanically transplanted carpet seedling (MTCS) with equal row spacing (30 cm) at five spacings and mechanically transplanted pot seedling (MTPS) with wide and narrow rows (23 + 33 cm) at five spacings. The results showed that MTPS presented significantly higher rice yields than MTCS as more spikelets per panicle. Rice yields of both mechanical transplanting methods first increased and then reduced with decreasing planting density, and its highest value was obtained at 77.9 × 104 seedlings ha−1. Compared with MTCS at the same stage, rice tiller dynamics of MTPS first increased and then decreased. Additionally, its dry matter accumulation per stem at jointing, heading, and maturity stages, leaf area index, photosynthetic potential, crop growth rate, and net assimilation rate were all significantly higher relative to MTCS. For each mechanical transplanting method, dry matter accumulation per panicle, leaf area index, photosynthetic potential, crop growth rate, and net assimilation rate from the sowing to jointing stages declined with decreasing planting density, while dry matter accumulation per stem and net assimilation rate from the heading to maturity stages increased. Compared with MTCS, MTPS significantly improved rice milling and appearance quality, decreasing density was also beneficial to rice milling and appearance quality, while grain content of amylose and protein were not sensitive to both transplanting method and planting density. Consequently, MTPS with 13.8 cm plant spacing is a suitable mechanical transplanting method for Nanjing 2728 to obtain better yield and quality under rice–crayfish continuous production system.

Varietal differences in growth characteristics in sugar cane

1987 ◽  
Vol 108 (1) ◽  
pp. 245-247 ◽  
Author(s):  
S. Singh ◽  
P. N. Gururaja Rao
Keyword(s):  
Growth Rate ◽  
Sugar Cane ◽  
Growth Characteristics ◽  
Net Assimilation Rate ◽  
Assimilation Rate ◽  
Area Index ◽  
Relative Growth ◽  
Varietal Differences ◽  
Net Assimilation ◽  
High Yielding Varieties

In sugar cane, investigations made earlier (Singh & Gururaja Rao, 1985) have shown that high-yielding varieties have higher net assimilation rate than low-yielding types. Similarly, differences in progeny means for relative growth rate and net assimilation rate have been reported by George (1965). In other crops also, varietal differences in leaf area index and net assimilation rate have been reported (Watson, 1947). It appears that in this crop, limited attempts have been made to study all the growth characteristics. This paper describes the differences in most of the growth characteristics in six sugar-cane varieties.

EFFECT OF SOLID AND LIQUID ORGANIC FERTILIZER ON GROWTH, YIELD AND YIELD COMPONENTS OF ROSSELLE (Hibiscus sabdariffa L.) IN THE NIGERIAN SAVANNAH

2021 ◽  
Vol 5 (2) ◽  
pp. 428-439
Author(s):  
K. M. Ladan ◽  
M. G. Abubakar ◽  
J. Suleiman
Keyword(s):  
Growth Rate ◽  
Plant Height ◽  
Seed Weight ◽  
Organic Fertilizer ◽  
Poultry Manure ◽  
Dry Weight ◽  
Assimilation Rate ◽  
Area Index ◽  
Net Assimilation ◽  
100 Seed Weight

The Study was conducted to evaluate the effect of solid and liquid organic fertilizer on growth and yield of rosselle in 2016 cropping season at Institute of Agricultural Reserve Zaria, Samaru (11011’N 07038E and 686m) and Institute of Horticultural Research Farm Bagauda (12000’N 8031”Em 488m) in Northern Guinea Savannah and Sudan Savannah Ecological Zones of above sea level Nigeria. Treatments consisted of four levels of solid poultry manure (0.0, 1.0, 2.0 and 3.0) tons/ha and five levels of liquid organic manure from Grand Total Organic Fertilizer Limited (0.0, 0.5, 1.0, 1.5 and 2.9) litres/ha, which were factorially combined in a randomized complete block design (RCBD) and replicated three times. Data on growth parameter were collected on plant height (cm), plant dry weight (g), leaf Area index crop growth rate (CGR) Relative Growth Rate (RGR) and Net assimilation rate (NAR) while data on yield parameters like number of calyx per pant, 100 seed weight (g) and  calyx yield per hectare kg/ha were collected. Results showed that plant height, plant dry weight(g), 100 seed weight(g) and calyx dry yield kg/ha had a significant increase with application of 2.0 litres/ha of liquid fertilizer than other rates. While application of solid poultry manure at 3.0ton/ha significantly increases plant height, net assimilation rate, leaf area index and calyx dry weight when compared with other rates. From the results obtained, the combination of 2.0 litres/ha liquid organic fertilizer and 3.0 ton/ha solid poultry manure produce the highest calyx yield at both location.

The growth of maize

1978 ◽  
Vol 90 (3) ◽  
pp. 569-577 ◽  
Author(s):  
G. O. Iremiren ◽  
G. M. Milbourn
Keyword(s):  
Leaf Area ◽  
Dry Matter ◽  
Matter Content ◽  
Net Assimilation Rate ◽  
Dry Matter Content ◽  
Dry Matter Yield ◽  
Assimilation Rate ◽  
Maize Silage ◽  
Area Index ◽  
Net Assimilation

SummaryTotal dry-matter yield of maize silage rose asymptotically as density was increased up to 17 plants/m2. Over the range 11–17 plants/m2, which is generally higher than is used in the U.K., the increase in yield was 1–1·6 t dry matter/ha which can justify the higher seed cost and although there was no adverse affect on time of maturity the risk of lodging increased at the highest density. During the harvest period whilst whole crop dry-matter percentage was rising from 23 to 28%, the ear dry-matter content rose steadily from 29 to 35%, whereas the leaf and stem dry-matter content remained essentially constant and only dried out at a later stage after a frost.Caldera 535 had a higher leaf area index and net assimilation rate than the earlier variety Julia which it outyielded by 15%. The additional yield was mainly stem tissue and the greater vegetative production caused an 11-day delay in reaching the silage stage of maturity (25% crop D.M.). NO differences occurred between density treatments and varieties in the forage quality components considered, namely percentage drymatter digestibility, modified acid-detergent fibre, crude protein and ash. Thus in U.K. conditions, total dry-matter yield exerts an overriding influence on the yields per unit area of these quality constituents. This contrasts with reports from the U.S.A. in which a reduced grain/stover ratio adversely influences silage quality.Removal of the whole ear (including husk and rachis) at an early stage in ear development resulted in a 50% reduction in the final dry-matter yield. In the earless plants, leaf area and net assimilation rate was lower, but the dry-matter content of the leaves and stem was considerably higher, and a marked purple coloration developed indicative of excess starch concentration. These results emphasize the need in maize silage not only for an adequate leaf canopy, best obtained early in the growing season by using high planting density and subsequently by using late maturing varieties, but also for sufficient sink capacity in the ear as well as in the stem fraction.

scholarly journals Effect Of Planting Geometry On Growth Of Rice Varieties

2017 ◽  
Vol 5 (4) ◽  
pp. 423-429 ◽  
Author(s):  
Mohan Mahato ◽  
Bishnu Bilas Adhikari
Keyword(s):  
Growth Rate ◽  
Leaf Area Index ◽  
Leaf Area ◽  
Plant Height ◽  
Dry Matter ◽  
Dry Matter Accumulation ◽  
Rice Varieties ◽  
Area Index ◽  
Crop Growth Rate ◽  
Planting Geometry

A field experiment was conducted under humid subtropical agro-climatic condition of Nepal during rainy season of 2014. The experiment was laid out in to two factor Randomized Complete Block Design with  three replications consisting three drought tolerant rice varieties (Sukhadhan-4, Sukhadhan-5 and Radha-4) and four planting geometry (15 cm × 10 cm, 15 cm × 15 cm, 20 cm × 15 cm and 20 cm × 20 cm). The results revealed that the highest plant height and maximum leaf area index was recorded in planting geometry 15 cm × 10 cm in all growth stages. Whereas, planting geometry 20 cm × 15 cm produced the maximum number of tiller m-2 in all growth stage.  While planting geometry 20 cm × 15 cm and 20 cm × 20 cm produced statistically similar crop growth rate and dry matter accumulation in all stage of growth. Regarding the varieties, Sukhadhan- 4 showed highest plant height up to 75 DAT and plant height was statistically similar to Radha - 4 in 60 and 75 DAT. But maximum number of tiller m-2, leaf area index, crop growth rate and dry matter accumulation were recorded in Sukhadhan – 5 varieties. Int. J. Appl. Sci. Biotechnol. Vol 5(4): 423-429

scholarly journals Effects of Gibberellic Acid (Ga3) on Growth and Yield Parameters of French Bean (Phaseolus Vulgaris L.)

2017 ◽  
Vol 43 (1) ◽  
pp. 49-60
Author(s):  
Ferdowsi Noor ◽  
Feroza Hossain ◽  
Umme Ara
Keyword(s):  
Growth Rate ◽  
Leaf Area ◽  
Dry Matter ◽  
Growth Parameters ◽  
French Bean ◽  
Research Field ◽  
Growth And Yield ◽  
Growth Stages ◽  
Area Index ◽  
Net Assimilation

A field study was conducted during the Rabi season of 2009-2010 in the research field of Bangladesh Council of Scientific and Industrial Research (BCSIR), Dhaka. Six levels of GA3, viz. 0, 30, 50, 70, 90 and 110 ppm were sprayed at 18 days after sowing (DAS). GA3 treatments significantly increased plant height than the control plants. GA3 with 30 to 90 ppm significantly increased number of branches and leaves, leaf area, leaf area index (LAI), leaf dry matter and total dry matter at different growth stages. GA3 at 30 to 70 ppm gradually increased crop growth rate (CGR), net assimilation rate (NAR) and relative growth rate (RGR) and declined advanced growth stages. Number of dry pods /plant, number of seeds /pod, 1000 seed weight, fresh fodder, fresh pod, dry seed yield and harvest index also significantly increased. Positive significant correlations were found among growth parameters and as well as yield contributing characters. Asiat. Soc. Bangladesh, Sci. 43(1): 49-60, June 2017

Banana plant growth. 2. Dry matter production, leaf area and growth analysis

1972 ◽  
Vol 12 (55) ◽  
pp. 216 ◽  
Author(s):  
DW Turner
Keyword(s):  
Plant Growth ◽  
Leaf Area ◽  
Dry Matter ◽  
Early Summer ◽  
Growth Stages ◽  
Assimilation Rate ◽  
Banana Plant ◽  
Area Index ◽  
Net Assimilation ◽  
Plant Crop

The quantitative aspects of banana plant growth (omitting roots) at Alstonville, New South Wales, are described. Dry matter distribution, leaf area index (L), net assimilation rate (E), leaf area ratio (F) and relative growth rates (R), were measured. For a spring planting, only 1695 kg ha-l dry matter were produced in the first twelve months but 6780 kg were produced in the first half of the second year as the bunch and first ratoon crop developed. The plant crop was characterized by early leaf growth (high F) whereas in the ratoon crops, corm growth was a feature of early growth stages. Leaf area index was less than 1 for the first twelve months but reached 5 after 18 months. Plants were 3.1 m X 1.9 m apart. Net assimilation rate was affected by internal and external factors. The main internal control was the growth of suckers, which tended to increase E. Removal of the suckers in autumn or winter caused a sudden drop i i ~ E and absolute growth rate but when they were removed in early summer E was increased. The external controls affecting E were solar radiation, temperature and soil moisture, although the amount of variation explained in correlations was low. - R appeared to be constant in the plant crop within morphologically defined growth stages. This was not so in moon crops and R was probably a resultant of ontogenetic and climatic drifts. Desuckering in autumn and winter decreased R. Early summer desuckering increased R.

scholarly journals Plant Growth Analysis of Jack Been (Canavalia ensiformis L.) at Different Spacing to Determine the Application Time of Cutback Technology

2019 ◽  
Vol 4 (1) ◽  
pp. 1-7
Author(s):  
N. Nurmuliana ◽  
Muh. Akhsan Akib
Keyword(s):  
Growth Rate ◽  
Leaf Area ◽  
Growth Analysis ◽  
Assimilation Rate ◽  
Area Index ◽  
Relative Growth ◽  
Jack Bean ◽  
Canavalia Ensiformis ◽  
Bean Plants ◽  
Net Assimilation

AbstractThe growth of jack bean (Canavalia ensiformis L) is affected by genetic and environmental factors.  One of the environmental factors involved is growing space. Growing space related to each plant of areas occupied is stated by the distance between plants. A Research has been conducted as long three months in dry season with average daily temperature of 25 to 31OC on altitude of 25 to 500 meter, to determine the timing of the application of cutback technology based on an analysis of growth of jack bean plants (Canavalia ensiformis L) in different growth spaces.  The research was conducted in the trial form using a randomized block design. Variables of plants growth analysis observed is leaf area index (LAI), leaf area is computed by gravimetric method; net assimilation rate (NAR), and relative growth rate (RGR) is determined based on the dry weight of plants; in all three rooms grew, namely 75 cm x 100 cm (control), 75 cm × 75 cm and 75 cm × 50 cm, each repeated three times. The result shows that the trend of leaf area index increased at net assimilation rate (g-1.cm-2.week-1) and relative growth rate (g-1.g-1.minggu-1) decreasing at the time the plant to the age 8 weeks after planting.  The best time for the application of reduction technology to jack bean plants (Canavalia ensiformis L) in all tested growing spaces, is recommended when plants are between 7 and 8 weeks after planting

Sign in / Sign up

Export Citation Format

Share Document