Adaptive responses of wild mungbean (Vigna radiata ssp. sublobata) to photo-thermal environment. II. Growth, biomass, and seed yield

2006 ◽  
Vol 57 (8) ◽  
pp. 929 ◽  
Author(s):  
G. J. Rebetzke ◽  
R. J. Lawn
Keyword(s):  
Seed Yield ◽  
Vigna Radiata ◽  
Dry Matter ◽  
Thermal Environment ◽  
Leaf Growth ◽  
Cool Temperature ◽  
Adaptive Responses ◽  
Matter Production ◽  
Artificial Photoperiod ◽  
Wild Accessions

The leaf growth, dry matter production, and seed yield of 11 wild mungbean (Vigna radiata ssp. sublobata) accessions of diverse geographic origin were observed under natural and artificial photoperiod–temperature conditions, to determine the extent to which genotypic differences could be attributed to adaptive responses to photo-thermal environment. Environments included serial sowings in the field in SE Queensland, complemented by artificial photoperiod extension and controlled-environment growth rooms. Photo-thermal environment influenced leaf growth, total dry matter production (TDM), and seed yield directly, through effects of (mainly cool) temperature on growth, and indirectly, through effects on phenology. In terms of direct effects, leaf production, leaf expansion, and leaf area were all sensitive to temperature, with implied base temperatures higher than usually observed in cultivated mungbean (V. radiata ssp. radiata). Genotypic sensitivity to temperature varied systematically with accession provenance and appeared to be of adaptive significance. In terms of the indirect effects of photo-thermal environment, genotypic and environmental effects on TDM were positively related to changes in total growth duration, and harvest index was negatively related to the period from sowing to flowering, similar to cultivated mungbean. However, seed yield was positively related to the duration of reproductive growth, reflecting the indeterminate growth habit of the wild accessions. As a consequence, the wild accessions are more responsive to favourable environments than typically observed in cultivated mungbean, which is determinate in habit. It is suggested that the introduction of the indeterminate trait into mungbean from the wild subspecies would increase the responsiveness of mungbean to favourable environments, analogous to that of black gram (V. mungo). Although the wild subspecies appeared more sensitive to cool temperature than cultivated mungbean, it may provide a source of tolerance to the warmer temperatures experienced during the wet season in the tropics.

Impact of weather variables on drymatter accumulation and yield of mungbean [Vigna radiata (L.) Wilczek] varieties under different dates of sowing

2016 ◽  
Author(s):  
Lanunola Tzudir ◽  
Shrabani Basu ◽  
Srijani Maji ◽  
Purnendu S. Bera ◽  
Rajib Nath ◽  
...  
Keyword(s):  
Seed Yield ◽  
Vigna Radiata ◽  
Canonical Correlation ◽  
Dry Matter ◽  
Dry Matter Accumulation ◽  
Weather Variables ◽  
Yield Attributes ◽  
Matter Production ◽  
Use Efficiency ◽  
Plot Design

A two year experiment was conducted at the BCKV with four mungbean varieties (Pant Mung-5, Bireswar, RMG-62 and Sukumar) sown under three dates (15th February, 1st and 15th March) in a split plot design where dates of sowing and varieties were allotted to main and sub plot treatments respectively with three replications. PAR was recorded with the help of line quantum sensor. Dry matter accumulation, yield attributes and yield were measured. Canonical correlation and correspondence analysis showed that absorbed PAR during 32 to 46 days after emergence (DAE) increased dry matter, pod and seed yield. PAR use efficiency (PARUE) of mungbean ranged from 0.75 to 0.88 g MJ-1 for seed yield. PARUE for dry matter production was maximum during 39 to 46 DAE. According to PARUE and heat use efficiency, Pant Mung-5 should be sown within 1st March in this zone. Growing degree day requirement gradually increased with delayed sowing.

Effect of Sugar Solution Infused into Mungbean(Vigna radiata(L.) Wilczek ) Plant on Seed Yield and Dry Matter Production

2002 ◽  
Vol 5 (1) ◽  
pp. 31-32
Author(s):  
Qazi A. Khaliq ◽  
Kenji Hirao ◽  
Masayuki Kadowaki ◽  
Fumitake Kubota
Keyword(s):  
Seed Yield ◽  
Vigna Radiata ◽  
Dry Matter ◽  
Dry Matter Production ◽  
Sugar Solution ◽  
Matter Production

scholarly journals Effect of sulphur on the seed yield and oil content of sesame (Sesamum indicum L.)

2019 ◽  
Vol 17 (1) ◽  
pp. 33-38
Author(s):  
Swapan Kumar Paul ◽  
Mosa Morsheda Khatun ◽  
Md Abdur Rahman Sarkar
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Dry Matter ◽  
Oil Content ◽  
Dry Matter Production ◽  
Production Plant ◽  
Matter Production ◽  
Stover Yield ◽  
Number Of Seeds ◽  
Number Of Branches

Sulphur is a component of plant amino acids, proteins, vitamins, and enzyme structures which influence the productivity of oil seed and total oil content. The experiment was conducted to find out the effect of sulphur on the seed yield and oil content of sesame in Bangladesh. The experiment comprised three varieties of sesame viz. Binatil-2, Binatil-3 and BARI Til-4 and six levels of sulphur (S) viz. 0, 10, 20, 30, 40 and 50 kg S ha–1. The experiment was laid out in a randomized complete block design with three replications. Dry matter production, crop characters, yield components, seed yield and oil content were significantly influenced by variety, level of sulphur and their interaction. The highest dry matter production plant–1 at 50 DAS (17.56 g), plant height (101.3 cm), number of branches plant–1 (3.66),  number of pods plant-1 (41.56), number of seeds pod-1 (58.83),  seed yield    (747.2 kg ha-1), stover yield (2243.0 kg ha–1) and oil content (40.03%) were obtained in BARI Til-4 while the corresponding lowest values of all parameters were recorded in Binatil-2. In case of sulphur application, the highest dry matter production plant–1 at 50 DAS (20.81 g), plant height (109.7 cm), number of branches plant–1 (3.87),  number of pods plant–1 (46.13),  number of seeds pod-1 (56.67),  seed yield (800.0 kg ha–1), stover yield (2787 kg ha–1 ) and oil content (43.97%) were obtained when crop was fertilized with 30 kg S ha–1 while the lowest seed yield (502.2 kg ha–1), stover yield (1550.0 kg ha–1) and oil content (32.80%) were obtained in control (0 kg S ha–1). BARI Til-4 fertilized with 30 kg S ha–1 produced the highest dry matter plant–1 at 50 DAS (24.80 g), number of pods plant–1 (51.13), seeds pod–1 (62.0) and seed yield (1011.0 kg ha–1). The highest oil content (43.97%) was also recorded in BARI Til-4 fertilized with 30 kg S ha–1, which was as good as that of BARI Til-4 fertilized with 40 kg S ha–1. Therefore, BARI Til-4 fertilized with 30 kg S ha–1 can be considered as a promising practice in respect of seed yield and oil content of sesame in Bangladesh. J. Bangladesh Agril. Univ. 17(1): 33–38, March 2019

Effect of varying seeding rates on hybrid and conventional summer rape performance in Manitoba

1992 ◽  
Vol 72 (3) ◽  
pp. 635-641 ◽  
Author(s):  
A. E. Van Deynze ◽  
P. B. E. McVetty ◽  
R. Scarth ◽  
S. R. Rimmer
Keyword(s):  
Protein Content ◽  
Chlorophyll Content ◽  
Seed Yield ◽  
Harvest Index ◽  
Dry Matter ◽  
Oil Content ◽  
Seed Quality ◽  
Seeding Rate ◽  
Seed Formation ◽  
Matter Production

To compare the effects of varying seeding rate on the agronomic performance, phenology and seed quality of hybrid and conventional summer rape cultivars, four hybrid and two conventional summer rape cultivars were seeded at 1.5, 3.0, 4.5, 6.0 and 9.0 kg ha−1 at two locations for 3 yr. The hybrid cultivars were, very importantly, 24% higher yielding and produced 50% more total dry matter than the conventional cultivars. The hybrid cultivars were, on average, 1.3% lower in seed oil content, 1.0% higher in seed protein content and equal in sum of oil and protein in the seed compared with the conventional cultivars. The hybrid cultivars were on average, 1.3 d later to 50% flowering and 1.1 d later to maturity than the average for the conventional cultivars, (i.e., equal or earlier to flowering and maturity than Regent). The hybrid cultivars were also 3.9% lower in harvest index and 1.3 ppm lower in chlorophyll content than the conventional cultivars. In spite of these differences, there were no significant cultivar-by-seeding-rate interactions, indicating that the hybrid and conventional cultivars responded similarly to varying seeding rate. Lodging, days to 50% flowering, days to maturity, harvest index, survival, oil content and protein content displayed significant linear responses to varying seeding rate. Stand at maturity, seed yield and total dry matter production displayed significant linear and quadratic responses to varying seeding rate. Varying seeding rate had no effect on seed formation period, the sum of oil and protein content, or chlorophyll content. A seeding rate of 6 kg ha−1 maximized seed yield for both hybrid and conventional summer rape cultivars.Key words: Brassica napus, canola, seed quality, agronomy, phenology

scholarly journals Response of Grain Legume Species to Terminal Drought in Timor-Leste

Proceedings ◽  
2020 ◽  
Vol 36 (1) ◽  
pp. 201
Author(s):  
Marcal Gusmao ◽  
Delfim Da Costa ◽  
Angelo Da Costa Freitas ◽  
Kadambot H. M. Siddique ◽  
Robert Williams
Keyword(s):  
Seed Yield ◽  
Seed Weight ◽  
Dry Matter ◽  
Grain Legumes ◽  
Grain Legume ◽  
Terminal Drought ◽  
Matter Production ◽  
Timor Leste ◽  
Water Treatments ◽  
Plot Design

Growth, development and yield of three-grain legumes (mung bean [F1], soybean [F2] and grass pea [F3]) following rice crop to enhance grain production was studied in a paddy field in the northern Timor-Leste. A split plot design was used with three water treatments (well-watered [W0], water withheld at flowering [W1] and after germination [W2]). Interaction between water treatments and species on dry matter production (p < 0.001) and seed yield (p = 0.005) was observed. In control, the highest seed yield was F1 (1.2 t/ha) followed by F2 (1.1 t/ha) and F3 (0.4 t/ha) respectively. There was a steady reduction in seed yield in F1 from W0 to W2, but almost fifty percent reduction in F2 under W1 and W2 compared to W0. F3 had little difference between water treatments. The W1 and W2 reduced number of filled pods per plant in all species compared to control (W0). Between the species, F3 had the highest filled pods per plant followed by F2 and F3. The W1 and W2 reduced seeds per pod of F1; however, it did not effect F2 and F3. There were interactions between water treatment and species on 100 seeds weight. The heaviest seeds were in F2 in the control plants, but in the F2 drought treatments (W1 and W2) seed weight were less than F3. The lowest seed weight was in F1, but there was no impact of the terminal droughts on its seed weight.

scholarly journals Physiological and Yield Responses of Some Selected Rapeseed/ Mustard Genotypes to High Temperature Stress

2020 ◽  
Vol 22 (1) ◽  
pp. 47-56
Author(s):  
Faruque Ahmed ◽  
IM Ahmed ◽  
N Mokarroma ◽  
F Begum ◽  
A Jahan
Keyword(s):  
Antioxidant Activity ◽  
High Temperature ◽  
Seed Yield ◽  
Dry Matter ◽  
High Temperature Stress ◽  
Development Stage ◽  
Grain Development ◽  
Leaf Chlorophyll ◽  
Matter Production ◽  
Sowing Dates

A pot experiment was conducted with five selected rapeseed/mustard genotypes (BJDH-11, BJDH-12, BJDH-20, BARI Sarisha-14, and BARI Sarisha-16) under two sowing dates (November 20 and December 20) for evaluating their responses to sowing date induced high temperature stress during rabi season of 2017-18. Sowing dates induced temperature variability showed remarkable changes in pheonlogy, leaf area, leaf chlorophyll content, dry matter production and seed yield. Although December 20 sown crop received lower temperatures (minimum 9.8 to 13.2 and maximum 22.6 to 27oC) than November 20 sown crop (minimum 14.8 to 16.4 and maximum 21 to 27.2oC) at flowering but reverse was found at grain development stage. Grain development stage of November 20sown crop received lower temperatures (minimum 8.2 to 13.2 and maximum 24.1 to 27 oC) while December 20 sown crop received higher temperatures at grain development stage (minimum 8.2 to 18 and maximum 22.6 to 32.5oC).As a result December 20 sown crop matured earlier (6 to 9 days) than November 20 sown crop. Leaf area/plant was higher in December 20 sown crops compared to November 20 sown but total dry matter production was more or less same in both the sowing dates. Leaf chlorophyll content did not show any remarkable variation due to variation in sowing dates. However, antioxidant activity like Catalyse (CAT), Peroxidase (POD) Ascorbate peroxidase (APX) and Malondial dehyde (MDA) were found higher in December 20 sown crops than that of November 20sown. Higher activity of APX, POD and CAT with lower activity of MDA indicates comparatively high temperature tolerant genotype. Among the genotypes APX, POD and CAT activity were found higher with lower activity of MDA in BJDH-11 and BJDH-20 and these genotypes also gave higher yield than others. On the basis of growth parameters, antioxidant activity and seed yield of genotype BJDH-11 and BJDH-20 could be select as terminal high temperature tolerance genotypes. Bangladesh Agron. J. 2019, 22(1): 47-56

The effect of copper supply on vegetative and seed yield of pasture legumes and the field calibration of a tissue test for detecting copper deficiency. II. Strawberry clover (Trifolium fragiferum L.)

1989 ◽  
Vol 40 (4) ◽  
pp. 833
Author(s):  
JD McFarlane
Keyword(s):  
Seed Production ◽  
Seed Yield ◽  
Dry Matter ◽  
Copper Concentration ◽  
Copper Deficiency ◽  
Critical Concentration ◽  
Dry Matter Production ◽  
Pasture Legumes ◽  
Critical Range ◽  
Matter Production

Seven rates of copper were applied to the soil prior to the sowing of strawberry clover (Trifolium fragiferumL. cv. Palestine) on an alkaline peat deficient in copper. Symptoms of copper deficiency were evident only on the untreated plots where the clover did not set seed nor persist into the second year.Over five years� production, 1.0 kg Cu/ha continued to provide adequate copper, with regular dressings of superphosphate, for maximum dry matter production and seed yield. It was found that seed yield was more sensitive than vegetative dry matter yield to sub-optimal copper supply. At the lowest rate of applied copper (0.125 kg/ha), the vegetative yield ranged from 53% to 80% of the maximum harvest yield, whereas the seed yield ranged from 15% to 50% of maximum yield.For tissue sampled in the spring, the proposed critical range for copper concentration in the youngest open leaf (YOL) for vegetative dry matter production is 3-35 mg Cu/kg whereas that for seed production is 4.5-5.5 mg Cu/kg. At other times of the year the critical concentrations were higher. It was not clear if this was due to environmental conditions or changing internal requirements for copper.The critical copper concentration range in whole top (WT) tissue of 3.0-4.0 mg/kg for vegetative dry matter production could be applied to all samplings. For seed yield the critical range for copper concentration in WT was 4.0-5.0 mg/kg for the spring harvests. The critical copper concentration in seed for seed production was 5.0-6.0 mg/kg. In the pasture situation a critical concentration of 5.0-6.0 mg Cu/kg in the WT should be adopted when the animal requirement is considered.

Response of vetch (Vicia spp.) to plant density in south-western Australia

2002 ◽  
Vol 42 (8) ◽  
pp. 1043 ◽  
Author(s):  
M. Seymour ◽  
K. H. M. Siddique ◽  
N. Brandon ◽  
L. Martin ◽  
E. Jackson
Keyword(s):  
Seed Yield ◽  
Western Australia ◽  
Dry Matter ◽  
Field Experiments ◽  
Plant Density ◽  
Yield Potential ◽  
Dry Matter Production ◽  
Vicia Sativa ◽  
Seeding Rate ◽  
Matter Production

The response of Vicia sativa (cvv. Languedoc, Blanchefleur and Morava) and V. benghalensis (cv. Barloo) seed yield to seeding rate was examined in 9 field experiments across 2 years in south-western Australia. There were 2 types of field experiments: seeding rate (20, 40, 60, 100 and 140 kg/ha) × cultivar (Languedoc, Blanchefleur, and Morava or Barloo), and time of sowing (2 times of sowing of either Languedoc or Blanchefleur) × seeding rate (5,�7.5, 10, 15, 20, 30, 40, 50, 75 and 100 kg/ha).A target density of 40 plants/m2 gave 'optimum' seed yield of vetch in south-western Australia. In high yielding situations, with a yield potential above 1.5 t/ha, the 'optimum' plant density for the early flowering cultivar Languedoc (85–97 days to 50% flowering) was increased to 60 plants/m2. The later flowering cultivar Blanchefleur (95–106 days to 50% flowering) had an optimum plant density of 33 plants/m2 at all sites, regardless of fitted maximum seed yield. Plant density in the range 31–38 plants/m2 was found to be adequate for dry matter production at maturity of Languedoc and Blanchefleur. For the remaining cultivars Barloo and Morava we were unable to determine an average optimum density for either dry matter or seed yield due to insufficient and/or inconsistent data.

Sign in / Sign up

Export Citation Format

Share Document