SEISMIC DELINEATION OF STRUCTURE-CONTROLLED CARBONATE CEMENT AND POTENTIAL ECONOMIC IMPLICATIONS, ANGEL FIELD, NORTH WEST SHELF

1995 ◽  
Vol 35 (1) ◽  
pp. 280
Author(s):  
S. Ryan-Grigor ◽  
J.P. Schulz-Rojahn
Keyword(s):  
Seismic Data ◽  
High Amplitude ◽  
Fault System ◽  
3D Seismic ◽  
Economic Implications ◽  
Northern Margin ◽  
North West ◽  
The North ◽  
Migration Pathways ◽  
3D Seismic Data

Major carbonate-cemented zones occur in Late Jurassic Angel Formation sandstones of marine mass flow origin that contain large hydrocarbon reserves in the Angel Field, Dampier Sub-basin. Preliminary results suggest that poikilotopic dolomite cement is dominant. The carbonate-cemented zones are identifiable from wireline log response and 3D seismic data, and occur in discrete intervals with a cumulative thickness of approximately 165m at Angel-2. These intervals produce a zone of high amplitude reflections of about 100 ms two-way time. Field-wide seismic mapping indicates that these carbonate-cemented zones sharply abut the northern margin of a major east-west trending strike-slip fault system that traverses this field. The carbonate-cemented zones extend in a wedge-like shape towards the northeast and concentrate along the crest of the main structural trend.The results underscore the importance of 3D seismic data for a better estimation of reservoir risk and reserves in variably carbonate-cemented sandstones.The carbonate-cemented zones may represent a 'plume' related to migration of petroleum and/or carbon dioxide. Therefore delineation of major carbonate-cemented zones using seismic data may aid in the identification of petroleum migration pathways and pools in the North West Shelf. Alternatively, carbonate cements dissolved south of the major fault zone and possibly in downdip locations in which case dissolution pores may exist in these areas. Further research is required to evaluate these hypotheses.

The Brunei slide: A giant submarine landslide on the North West Borneo Margin revealed by 3D seismic data

2007 ◽  
Vol 246 (1) ◽  
pp. 9-23 ◽  
Author(s):  
M.J.R. Gee ◽  
H.S. Uy ◽  
J. Warren ◽  
C.K. Morley ◽  
J.J. Lambiase
Keyword(s):  
Seismic Data ◽  
Submarine Landslide ◽  
3D Seismic ◽  
North West ◽  
The North ◽  
3D Seismic Data

DEMETER HIGH RESOLUTION 3D SEISMIC SURVEY—REVITALISED DEVELOPMENT AND EXPLORATION ON THE NORTH WEST SHELF, AUSTRALIA

2006 ◽  
Vol 46 (1) ◽  
pp. 101 ◽  
Author(s):  
K.J. Bennett ◽  
M.R. Bussell
Keyword(s):  
High Resolution ◽  
Seismic Data ◽  
New Technologies ◽  
Seismic Survey ◽  
Future Application ◽  
3D Seismic ◽  
Gas Field ◽  
North West ◽  
The North ◽  
Exploration And Development

The newly acquired 3,590 km2 Demeter 3D high resolution seismic survey covers most of the North West Shelf Venture (NWSV) area; a prolific hydrocarbon province with ultimate recoverable reserves of greater than 30 Tcf gas and 1.5 billion bbls of oil and natural gas liquids. The exploration and development of this area has evolved in parallel with the advent of new technologies, maturing into the present phase of revitalised development and exploration based on the Demeter 3D.The NWSV is entering a period of growing gas market demand and infrastructure expansion, combined with a more diverse and mature supply portfolio of offshore fields. A sequence of satellite fields will require optimised development over the next 5–10 years, with a large number of wells to be drilled.The NWSV area is acknowledged to be a complex seismic environment that, until recently, was imaged by a patchwork of eight vintage (1981–98) 3D seismic surveys, each acquired with different parameters. With most of the clearly defined structural highs drilled, exploration success in recent years has been modest. This is due primarily to severe seismic multiple contamination masking the more subtle and deeper exploration prospects. The poor quality and low resolution of vintage seismic data has also impeded reservoir characterisation and sub-surface modelling. These sub-surface uncertainties, together with the large planned expenditure associated with forthcoming development, justified the need for the Demeter leading edge 3D seismic acquisition and processing techniques to underpin field development planning and reserves evaluations.The objective of the Demeter 3D survey was to re-image the NWSV area with a single acquisition and processing sequence to reduce multiple contamination and improve imaging of intra-reservoir architecture. Single source (133 nominal fold), shallow solid streamer acquisition combined with five stages of demultiple and detailed velocity analysis are considered key components of Demeter.The final Demeter volumes were delivered early 2005 and already some benefits of the higher resolution data have been realised, exemplified in the following:Successful drilling of development wells on the Wanaea, Lambert and Hermes oil fields and identification of further opportunities on Wanaea-Cossack and Lambert- Hermes;Dramatic improvements in seismic data quality observed at the giant Perseus gas field helping define seven development well locations;Considerably improved definition of fluvial channel architecture in the south of the Goodwyn gas field allowing for improved well placement and understanding of reservoir distribution;Identification of new exploration prospects and reevaluation of the existing prospect portfolio. Although the Demeter data set has given significant bandwidth needed for this revitalised phase of exploration and development, there remain areas that still suffer from poor seismic imaging, providing challenges for the future application of new technologies.

Quaternary evolution of the northern North Sea

2020 ◽  
Author(s):  
Christine Batchelor ◽  
Dag Ottesen ◽  
Benjamin Bellwald ◽  
Sverre Planke ◽  
Helge Løseth ◽  
...  
Keyword(s):  
North Sea ◽  
Seismic Data ◽  
3D Seismic ◽  
Quaternary Sediments ◽  
The North ◽  
The North Sea ◽  
Data Coverage ◽  
Northern North Sea ◽  
2D And 3D ◽  
3D Seismic Data

<p>The North Sea has arguably the most extensive geophysical data coverage of any glacier-influenced sedimentary regime on Earth, enabling detailed investigation of the thick (up to 1 km) sequence of Quaternary sediments that is preserved within the North Sea Basin. At the start of the Quaternary, the bathymetry of the northern North Sea was dominated by a deep depression that provided accommodation for sediment input from the Norwegian mainland and the East Shetland Platform. Here we use an extensive database of 2D and 3D seismic data to investigate the geological development of the northern North Sea through the Quaternary.</p><p>Three main sedimentary processes were dominant within the northern North Sea during the early Quaternary: 1) the delivery and associated basinward transfer of glacier-derived sediments from an ice mass centred over mainland Norway; 2) the delivery of fluvio-deltaic sediments from the East Shetland Platform; and 3) contourite deposition and the reworking of sediments by contour currents. The infilling of the North Sea Basin during the early Quaternary increased the width and reduced the water depth of the continental shelf, facilitating the initiation of the Norwegian Channel Ice Stream.</p>

Extensive, Gas-charged Quaternary Sand Accumulations of the Northern North Sea and North Sea Fan

2020 ◽  
Author(s):  
Benjamin Bellwald ◽  
Sverre Planke ◽  
Sunil Vadakkepuliyambatta ◽  
Stefan Buenz ◽  
Christine Batchelor ◽  
...  
Keyword(s):  
North Sea ◽  
Seismic Data ◽  
Data Sets ◽  
3D Seismic ◽  
Fine Grained ◽  
The North ◽  
Northern North Sea ◽  
Well Data ◽  
Sea Fan ◽  
3D Seismic Data

<p>Sediments deposited by marine-based ice sheets are dominantly fine-grained glacial muds, which are commonly known for their sealing properties for migrating fluids. However, the Peon and Aviat hydrocarbon discoveries in the North Sea show that coarse-grained glacial sands can occur over large areas in formerly glaciated continental shelves. In this study, we use conventional and high-resolution 2D and 3D seismic data combined with well information to present new models for large-scale fluid accumulations within the shallow subsurface of the Norwegian Continental Shelf. The data include 48,000 km<sup>2</sup> of high-quality 3D seismic data and 150 km<sup>2</sup> of high-resolution P-Cable 3D seismic data, with a vertical resolution of 2 m and a horizontal resolution of 6 to 10 m in these data sets. We conducted horizon picking, gridding and attribute extractions as well as seismic geomorphological interpretation, and integrated the results obtained from the seismic interpretation with existing well data.</p><p>The thicknesses of the Quaternary deposits vary from hundreds of meters of subglacial till in the Northern North Sea to several kilometers of glacigenic sediments in the North Sea Fan. Gas-charged, sandy accumulations are characterized by phase-reserved reflections with anomalously high amplitudes in the seismic data as well as density and velocity decreases in the well data. Extensive (>10 km<sup>2</sup>) Quaternary sand accumulations within this package include (i) glacial sands in an ice-marginal outwash fan, sealed by stiff glacial tills deposited by repeated glaciations (the Peon discovery in the Northern North Sea), (ii) sandy channel-levee systems sealed by fine-grained mud within sequences of glacigenic debris flows, formed during shelf-edge glaciations, (iii) fine-grained glacimarine sands of contouritic origin sealed by gas hydrates, and (iv) remobilized oozes above large evacuation craters and sealed by megaslides and glacial muds. The development of the Fennoscandian Ice Sheet resulted in a rich variety of depositional environments with frequently changing types and patterns of glacial sedimentation. Extensive new 3D seismic data sets are crucial to correctly interpret glacial processes and to analyze the grain sizes of the related deposits. Furthermore, these data sets allow the identification of localized extensive fluid accumulations within the Quaternary succession and distinguish stratigraphic levels favorable for fluid accumulations from layers acting as fluid barriers.</p>

Diapiric shale and coast-perpendicular, fault-related subbasins, south Texas Gulf Coast

2015 ◽  
Vol 3 (2) ◽  
pp. T43-T56 ◽  
Author(s):  
Osareni C. Ogiesoba ◽  
Rodolfo Hernandez
Keyword(s):  
Seismic Data ◽  
Gulf Coast ◽  
Structural Features ◽  
South Texas ◽  
3D Seismic ◽  
Texas Gulf Coast ◽  
Vertical Loading ◽  
The North ◽  
Visualization Tools ◽  
3D Seismic Data

Coast-perpendicular shale ridges are rare structural features worldwide, and their origin remains a subject of debate. We studied some coast-perpendicular shale ridges and faults within a minibasin located onshore in Refugio County in the Texas Gulf Coast. We used 3D seismic data, visualization tools, and seismic attributes to examine the geometry of coast-perpendicular diapiric structures associated subbasins (SBs) and faults, and coast-parallel listric faults. Our results indicated that the minibasin is subdivided into four SBs by five diapiric shale ridges that intrude through the fault heaves of down-to-the-basin (synthetic) and coast-perpendicular faults. Three of the SBs are oriented perpendicular to the coast, whereas the fourth has a curvilinear form trending northeast–southwest–southeast. Of the five diapiric shale ridges, three are coast-perpendicular. The other two are curvilinear to the coast. All five diapiric shale ridges are associated with coast-perpendicular faults that bound the flanks of the ridges. On the basis of our mapping results, we deduced that the origin of the coast-perpendicular faults in the study area are related to the coalescing of en echelon synthetic faults, as well as the coalition of synthetic and antithetic fault planes. We inferred that the origin of the shale diapirs is related to vertical loading and, possibly, local southwest–northeast lateral compression of interbedded, overpressured, shale-prone intervals. The coast-perpendicular faults within the Frio formed as a result of reactivation of the Eocene-Vicksburg coast-perpendicular faults. Synthetic faults dominate the pattern within the SB in the north where shale ridges are broad, whereas antithetic faults dominate the pattern in the south where shale ridges are narrow.

Identification of polygonal faulting from legacy 3D seismic data in vintage Gulf of Mexico data using seismic attributes

2021 ◽  
pp. 1-17
Author(s):  
Karen M. Leopoldino Oliveira ◽  
Heather Bedle ◽  
Karelia La Marca Molina
Keyword(s):  
Seismic Data ◽  
Seismic Attributes ◽  
Fault System ◽  
3D Seismic ◽  
Seismic Attribute ◽  
Variable Amplitude ◽  
Attribute Analysis ◽  
Amplitude Data ◽  
3D Seismic Data ◽  
Polygonal Fault

We analyzed a 1991 3D seismic data located offshore Florida and applied seismic attribute analysis to identify geological structures. Initially, the seismic data appears to have a high signal-to-noise-ratio, being of an older vintage of quality, and appears to reveal variable amplitude subparallel horizons. Additional geophysical analysis, including seismic attribute analysis, reveals that the data has excessive denoising, and that the continuous features are actually a network of polygonal faults. The polygonal faults were identified in two tiers using variance, curvature, dip magnitude, and dip azimuth seismic attributes. Inline and crossline sections show continuous reflectors with a noisy appearance, where the polygonal faults are suppressed. In the variance time slices, the polygonal fault system forms a complex network that is not clearly imaged in the seismic amplitude data. The patterns of polygonal fault systems in this legacy dataset are compared to more recently acquired 3D seismic data from Australia and New Zealand. It is relevant to emphasize the importance of seismic attribute analysis to improve accuracy of interpretations, and also to not dismiss older seismic data that has low accurate imaging, as the variable amplitude subparallel horizons might have a geologic origin.

Structure of the footwall of a listric fault system revealed by 3D seismic data from the Niger Delta

2011 ◽  
Vol 24 (1) ◽  
pp. 107-123 ◽  
Author(s):  
Dominic Maloney ◽  
Richard Davies ◽  
Jonathan Imber ◽  
Stephen King
Keyword(s):  
Seismic Data ◽  
Niger Delta ◽  
Fault System ◽  
3D Seismic ◽  
Listric Fault ◽  
3D Seismic Data

CARNARVON BASIN ARCHITECTURE AND STRUCTURE DEFINED BY THE INTEGRATION OF MINERAL AND PETROLEUM EXPLORATION TOOLS AND TECHNIQUES

2002 ◽  
Vol 42 (1) ◽  
pp. 287 ◽  
Author(s):  
L.L. Pryer ◽  
K.K. Romine ◽  
T.S. Loutit ◽  
R.G. Barnes
Keyword(s):  
Seismic Data ◽  
Structural Model ◽  
Mineral Exploration ◽  
Petroleum Exploration ◽  
Block Rotation ◽  
North West ◽  
The North ◽  
Northern Carnarvon Basin ◽  
Migration Pathways ◽  
Carnarvon Basin

The Barrow and Dampier Sub-basins of the Northern Carnarvon Basin developed by repeated reactivation of long-lived basement structures during Palaeozoic and Mesozoic tectonism. Inherited basement fabric specific to the terranes and mobile belts in the region comprise northwest, northeast, and north–south-trending Archaean and Proterozoic structures. Reactivation of these structures controlled the shape of the sub-basin depocentres and basement topography, and determined the orientation and style of structures in the sediments.The Lewis Trough is localised over a reactivated NEtrending former strike-slip zone, the North West Shelf (NWS) Megashear. The inboard Dampier Sub-basin reflects the influence of the fabric of the underlying Pilbara Craton. Proterozoic mobile belts underlie the Barrow Sub-basin where basement fabric is dominated by two structural trends, NE-trending Megashear structures offset sinistrally by NS-trending Pinjarra structures.The present-day geometry and basement topography of the basins is the result of accumulated deformation produced by three main tectonic phases. Regional NESW extension in the Devonian produced sinistral strikeslip on NE-trending Megashear structures. Large Devonian-Carboniferous pull-apart basins were introduced in the Barrow Sub-basin where Megashear structures stepped to the left and are responsible for the major structural differences between the Barrow and Dampier Sub-basins. Northwest extension in the Late Carboniferous to Early Permian marks the main extensional phase with extreme crustal attenuation. The majority of the Northern Carnarvon basin sediments were deposited during this extensional basin phase and the subsequent Triassic sag phase. Jurassic extension reactivated Permian faults during renewed NW extension. A change in extension direction occurred prior to Cretaceous sea floor spreading, manifest in basement block rotation concentrated in the Tithonian. This event changed the shape and size of basin compartments and altered fluid migration pathways.The currently mapped structural trends, compartment size and shape of the Barrow and Dampier Sub-basins of the Northern Carnarvon Basin reflect the “character” of the basement beneath and surrounding each of the subbasins.Basement character is defined by the composition, lithology, structure, grain, fabric, rheology and regolith of each basement terrane beneath or surrounding the target basins. Basement character can be discriminated and mapped with mineral exploration methods that use non-seismic data such as gravity, magnetics and bathymetry, and then calibrated with available seismic and well datasets. A range of remote sensing and geophysical datasets were systematically calibrated, integrated and interpreted starting at a scale of about 1:1.5 million (covering much of Western Australia) and progressing to scales of about 1:250,000 in the sub-basins. The interpretation produced a new view of the basement geology of the region and its influence on basin architecture and fill history. The bottom-up or basement-first interpretation process complements the more traditional top-down seismic and well-driven exploration methods, providing a consistent map-based regional structural model that constrains structural interpretation of seismic data.The combination of non-seismic and seismic data provides a powerful tool for mapping basement architecture (SEEBASE™: Structurally Enhanced view of Economic Basement); basement-involved faults (trap type and size); intra-sedimentary geology (igneous bodies, basement-detached faults, basin floor fans); primary fluid focussing and migration pathways and paleo-river drainage patterns, sediment composition and lithology.

Sign in / Sign up

Export Citation Format

Share Document