Structural and stratigraphic architecture of Australia's frontier onshore sedimentary basins: the Western Officer and Southern Carnarvon basins, Western Australia

2012 ◽  
Vol 52 (2) ◽  
pp. 670
Author(s):  
Lidena Carr ◽  
Russell Korsch ◽  
Arthur Mory ◽  
Roger Hocking ◽  
Sarah Marshall ◽  
...  
Keyword(s):  
Western Australia ◽  
Sedimentary Basins ◽  
Petroleum Exploration ◽  
Seismic Line ◽  
Seismic Reflection Data ◽  
Sequence Stratigraphic ◽  
Reflection Data ◽  
Half Graben ◽  
Seismic Lines ◽  
Carnarvon Basin

During the past five years, the Onshore Energy Security Program, funded by the Australian Government and conducted by Geoscience Australia, in conjunction with state and territory geological surveys, has acquired deep seismic reflection data across several frontier sedimentary basins to stimulate petroleum exploration in onshore Australia. This extended abstract presents data from two seismic lines collected in Western Australia in 2011. The 487 km long Yilgarn-Officer-Musgrave (YOM) seismic line crossed the western Officer Basin in Western Australia, and the 259 km long, Southern Carnarvon Seismic line crossed the Byro Sub-basin of the Southern Carnarvon Basin. The YOM survey imaged the Neoproterozoic to Devonian western Officer Basin, one of Australia's underexplored sedimentary basins with hydrocarbon potential. The survey data will also provide geoscientific knowledge on the architecture of Australia's crust and the relationship between the eastern Yilgarn Craton and the Musgrave Province. The Southern Carnarvon survey imaged the onshore section of the Ordovician to Permian Carnarvon Basin, which offshore is one of Australia's premier petroleum-producing provinces. The Byro Sub-basin is an underexplored depocentre with the potential for both hydrocarbon and geothermal energy. Where the seismic traverse crossed the Byro Sub-basin it imaged two relatively thick half graben, on west dipping bounding faults. Structural and sequence stratigraphic interpretations of the two seismic lines are presented in this extended abstract.

Structural and stratigraphic architecture of Australia's frontier onshore sedimentary basins: the Arckaringa, Officer, Amadeus, and Georgina basins

2011 ◽  
Vol 51 (2) ◽  
pp. 703
Author(s):  
Lidena Carr ◽  
Russell Korsch ◽  
Wolfgang Preiss ◽  
Sandra Menpes ◽  
Josef Holzschuh ◽  
...  
Keyword(s):  
Sedimentary Basins ◽  
Petroleum Exploration ◽  
Seismic Line ◽  
Seismic Reflection Data ◽  
Petroleum Potential ◽  
Northern Margin ◽  
The North ◽  
Reflection Data ◽  
Southern Margin ◽  
Seismic Lines

The Onshore Energy Security Program—funded by the Australian Government and conducted by Geoscience Australia—has acquired deep seismic reflection data in conjunction with state and territory geological surveys, across several frontier sedimentary basins to stimulate petroleum exploration in onshore Australia. Here, we present data from two seismic lines collected in SA and NT. Seismic line 08GA-OM1 crossed the Arckaringa and Officer basins in SA and the southern-most Amadeus Basin in NT. Seismic line 09GA-GA1 crossed the northeastern part of the Amadeus Basin and the complete width of the southern Georgina Basin in NT. Structural and sequence stratigraphic interpretations of the seismic lines will be presented here, followed by an assessment of the petroleum potential of the basins. Seismic line 08GA-OM1 also crosses the Neoproterozoic to Devonian eastern Officer Basin. The basin is structurally complex in this area, being dominated by south-directed thrust faults and fault-related folds—providing potential for underthrust petroleum plays. The northern margin of the basin is overthrust to the south by the Mesoproterozoic Musgrave Province. To the north, the Moorilyanna Trough of the Officer Basin is a major depocentre of up to 7,000 m deep. Both seismic lines cross parts of the eastern Amadeus Basin. Seismic line 08GA-OM1 shows that the southern margin of the basin is overthrust to the north by the Musgrave Province with the main movement during the Petermann Orogeny. In the northeast, seismic line 09GA-GA1 crosses two parts of the basin separated by the Paleoproteroozic to Mesoproterozoic Casey Inlier (part of the Arunta Region). The northern margin of the basin is imaged seismically as a southward-verging, thinned-skinned thrust belt, showing considerable structural thickening of the stratigraphic succession. Seismic line 09GA-GA1 was positioned to cross that part of the southern Georgina Basin that was considered previously to be in the oil window. Here, the basin has a complex southern margin, with Neoproterozoic stratigraphy being thrust interleaved with basement rocks of the Arunta Region. The main part of the basin, containing a Neoproterozoic to Devonian succession, is asymmetric, thinning to the north where it overlies the Paleoproterozoic Davenport Province. The well, Phillip–2, drilled adjacent to the seismic line, intersected basement at a depth of 1,489 m, and has been used to map the stratigraphic sequences across the basin.

The role of deep seismic reflection data in understanding the architecture and petroleum potential of Australia's onshore sedimentary basins

2010 ◽  
Vol 50 (2) ◽  
pp. 726 ◽  
Author(s):  
Lidena Carr ◽  
Russell Korsch ◽  
Leonie Jones ◽  
Josef Holzschuh
Keyword(s):  
Seismic Reflection ◽  
Sedimentary Basins ◽  
Source Rocks ◽  
Petroleum Exploration ◽  
Seismic Line ◽  
Seismic Reflection Data ◽  
Petroleum Potential ◽  
Deep Seismic Reflection ◽  
Reflection Data ◽  
Stratigraphic Sequences

The onshore energy security program, funded by the Australian Government and conducted by Geoscience Australia, has acquired deep seismic reflection data across several frontier sedimentary basins to stimulate petroleum exploration in onshore Australia. Detailed interpretation of deep seismic reflection profiles from four onshore basins, focussing on overall basin geometry and internal sequence stratigraphy, will be presented here, with the aim of assessing the petroleum potential of the basins. At the southern end of the exposed part of the Mt Isa Province, northwest Queensland, a deep seismic line (06GA–M6) crosses the Burke River structural zone of the Georgina Basin. The basin here is >50 km wide, with a half graben geometry, and bounded in the west by a rift border fault. Given the overall architecture, this basin will be of interest for petroleum exploration. The Millungera Basin in northwest Queensland is completely covered by the thin Eromanga Basin and was unknown prior to being detected on two seismic lines (06GA–M4 and 06GA–M5) acquired in 2006. Following this, seismic line 07GA–IG1 imaged a 65 km wide section of the basin. The geometry of internal stratigraphic sequences and a post-depositional thrust margin indicate that the original succession was much thicker than preserved today and may have potential for a petroleum system. The Yathong Trough, in the southeast part of the Darling Basin in NSW, has been imaged in seismic line 08GA–RS2 and interpreted in detail using sequence stratigraphic principles, with several sequences being mapped. Previous studies indicate that the upper part of this basin consists of Devonian sedimentary rocks, with potential source rocks at depth. In eastern South Australia, seismic line 08GA–A1 crossed the Cambrian Arrowie Basin, which is underlain by a Neoproterozoic succession of the Adelaide Rift System. Stratigraphic sequences have been mapped and can be tied to recent drilling for mineral and geothermal exploration. Shallow drill holes from past petroleum exploration have aided the assessment of the petroleum potential of the Cambrian Hawker Group, which contains bitumen in the core, indicating the presence of source rocks in the basin system.

Integration of Geophysical Technologies in the Petroleum Industry

2021 ◽  
Keyword(s):  
Co2 Storage ◽  
Petroleum Industry ◽  
Petroleum Exploration ◽  
Reflection Seismology ◽  
Seismic Reflection Data ◽  
Reflection Data ◽  
Advanced Students ◽  
Storage Reservoirs ◽  
Magnetic Resistivity ◽  
Exploration And Production

The most utilized technique for exploring the Earth's subsurface for petroleum is reflection seismology. However, a sole focus on reflection seismology often misses opportunities to integrate other geophysical techniques such as gravity, magnetic, resistivity, and other seismicity techniques, which have tended to be used in isolation and by specialist teams. There is now growing appreciation that these technologies used in combination with reflection seismology can produce more accurate images of the subsurface. This book describes how these different field techniques can be used individually and in combination with each other and with seismic reflection data. World leading experts present chapters covering different techniques and describe when, where, and how to apply them to improve petroleum exploration and production. It also explores the use of such techniques in monitoring CO2 storage reservoirs. Including case studies throughout, it will be an invaluable resource for petroleum industry professionals, advanced students, and researchers.

Three-dimensional geometry and growth of a basement-involved fault network developed during multiphase extension, Enderby Terrace, North West Shelf of Australia

2021 ◽  
Author(s):  
Hongdan Deng ◽  
Ken McClay
Keyword(s):  
Three Dimensional ◽  
Sedimentary Basins ◽  
Fault Reactivation ◽  
Late Triassic ◽  
Seismic Reflection Data ◽  
North West ◽  
Reflection Data ◽  
Data Volume ◽  
Vertical Linkages ◽  
Fault Network

<div>Basement fault reactivation, and the growth, interaction, and linkage with new fault segments are fundamentally three-dimensional and critical for understanding the evolution of fault network development in sedimentary basins. This paper analyses the evolution of a complex, basement-involved extensional fault network on the Enderby Terrace on the eastern margin of the Dampier sub-basin, NW Shelf of Australia. A high-resolution, depth-converted, 3D seismic reflection data volume is used to show that multiphase, oblique extensional reactivation of basement-involved faults controlled the development of the fault network in the overlying strata. Oblique reactivation of the pre-existing faults initially led to the formation of overlying, en échelon Late Triassic – Middle Jurassic fault segments that, as WNW–directed rifting progressed on the margin, linked by breaching of relay ramp to form two intersecting fault systems (F1 and F2-F4). Further reactivation in the Latest Jurassic – Early Cretaceous (NNW–SSE extension) produced an additional set of en échelon fault arrays in the cover strata. The final fault network consists of main or principal faults and subordinate or splay faults, together with branch lines that link the various components. Our study shows that breaching of relay ramps and/or vertical linkages produces vertical and horizontal branch lines giving complex final fault geometries. We find that repeated activity of the basement-involved faults tends to form continuous and planar fault architectures that favor displacement transfer between the main constituent segments along strike and with depth.</div>

scholarly journals Seismic reflection data reveal the 3D structure of the newly discovered Exmouth Dyke Swarm, offshore NW Australia

2020 ◽  
Author(s):  
Craig Magee ◽  
Christopher A.-L. Jackson
Keyword(s):  
Seismic Reflection ◽  
Surface Deformation ◽  
3D Structure ◽  
Sedimentary Basins ◽  
Dyke Swarm ◽  
Normal Faults ◽  
Seismic Reflection Data ◽  
Reflection Data ◽  
Dyke Swarms ◽  
Nw Australia

Abstract. Dyke swarms are common on Earth and other planetary bodies, comprising arrays of dykes that can extend for 10's to 1000's of kilometres. The vast extent of such dyke swarms, and their rapid emplacement, means they can significantly influence a variety of planetary processes, including continental break-up, crustal extension, resource accumulation, and volcanism. Determining the mechanisms driving dyke swarm emplacement is thus critical to a range of Earth Science disciplines. However, unravelling dyke swarm emplacement mechanics relies on constraining their 3D structure, which is extremely difficult given we typically cannot access their subsurface geometry at a sufficiently high enough resolution. Here we use high-quality seismic reflection data to identify and examine the 3D geometry of the newly discovered Exmouth Dyke Swarm, and associated structures (i.e. dyke-induced normal faults and pit craters), in unprecedented detail. The latest Jurassic dyke swarm is located on the Gascoyne Margin offshore NW Australia and contains numerous dykes that are > 170 km long, potentially > 500 km long. The mapped dykes are distributed radially across a 39° arc centred on the Cuvier Margin; we infer this focal area marks the source of the dyke swarm, which was likely a mantle plume. We demonstrate seismic reflection data provides unique opportunities to map and quantify dyke swarms in 3D in sedimentary basins, which can allow us to: (i) recognise dyke swarms across continental margins worldwide and incorporate them into models of basin evolution and fluid flow; (ii) test previous models and hypotheses concerning the 3D structure of dyke swarms; (iii) reveal how dyke-induced normal faults and pit craters relate to dyking; and (iv) unravel how dyking translates into surface deformation.

THE EVOLUTION OF THE BERNIER RIDGE, SOUTHERN CARNARVON BASIN, WESTERN AUSTRALIA:IMPLICATIONS FOR PETROLEUM PROSPECTIVITY

2004 ◽  
Vol 44 (1) ◽  
pp. 241 ◽  
Author(s):  
A.M. Lockwood ◽  
C. D’Ercole
Keyword(s):  
Seismic Data ◽  
Large Scale ◽  
Sedimentary Basins ◽  
Early Carboniferous ◽  
Source Rocks ◽  
Petroleum Exploration ◽  
Large Igneous Province ◽  
Satellite Gravity ◽  
Tectonic Events ◽  
Carnarvon Basin

The basement topography of the Gascoyne Platform and adjoining areas in the Southern Carnarvon Basin was investigated using satellite gravity and seismic data, assisted by a depth to crystalline basement map derived from modelling the isostatic residual gravity anomaly. The resulting enhanced view of the basement topography reveals that the Gascoyne Platform extends further westward than previously indicated, and is bounded by a northerly trending ridge of shallow basement, named the Bernier Ridge.The Bernier Ridge is a product of rift-flank uplift prior to the Valanginian breakup of Gondwana, and lies east of a series of small Mesozoic syn-rift sedimentary basins. Extensive magmatic underplating of the continental margin associated with this event, and a large igneous province is inferred west of the ridge from potential field and seismic data. Significant tectonic events that contributed to the present form of the Bernier Ridge include the creation of the basement material during the Proterozoic assembly of Rodinia, large-scale faulting during the ?Cambrian, uplift and associated glaciation during the early Carboniferous, and rifting of Gondwana during the Late Jurassic. The depositional history and maturity of the Gascoyne Platform and Bernier Ridge show that these terrains have been structurally elevated since the mid-Carboniferous.No wells have been drilled on the Bernier Ridge. The main source rocks within the sedimentary basins west of the Bernier Ridge are probably Jurassic, similar to those in the better-known Abrolhos–Houtman and Exmouth Sub-basins, where they are mostly early mature to mature and within the oil window respectively. Within the Bernier Ridge area, prospective plays for petroleum exploration in the Jurassic succession include truncation at the breakup unconformity sealed by post-breakup shale, and tilted fault blocks sealed by intraformational shale. Plays in the post-breakup succession include stratigraphic traps and minor rollover structures.

ENVIRONMENTAL IMPACT OF SEISMIC OPERATIONS IN THE OTWAY BASIN, SOUTH AUSTRALIA

1994 ◽  
Vol 34 (1) ◽  
pp. 741 ◽  
Author(s):  
M. L. Williams ◽  
A. J. Boulton ◽  
M. Hyde ◽  
A. J. Kinnear ◽  
C. D. Cockshell
Keyword(s):  
Environmental Management ◽  
Environmental Impact ◽  
Vegetation Structure ◽  
South Australia ◽  
Petroleum Exploration ◽  
Seismic Exploration ◽  
Native Vegetation ◽  
Seismic Line ◽  
The Impact ◽  
Seismic Lines

The Department of Mines and Energy, South Australia (DME) contracted Michael Williams and Associates Pty Ltd to audit the environmental management of seismic exploration operations in the South Australian Otway Basin. The audit was carried out in early 1992 and covered petroleum exploration operators and DME environmental management systems. An innovative field sampling technique was developed to compare the environmental impact of two different seismic line clearing techniques. Recovery of native vegetation as measured by vegetation structure was also quantified.The audit found DME to have a dynamic and integrated environmental management system while company systems varied in standard. Wide consultation assisted the audit process.As a result of clearing for agriculture, native vegetation covers only six per cent of the Otway Basin. With the strict limitations to broad-scale vegetation clearance since the mid-1980s and the cessation since 1991, the greatest environmental impact of seismic exploration is the clearance of native vegetation for access by seismic vehicles. Native vegetation structure and associated abiotic variables on seismic lines and adjacent control sites, were subject to a classification and ordination analysis which compared the impact of seismic lines constructed by bulldozer or Hydro-ax (industrial slasher). Post-seismic recovery rates of three different vegetation associations were also determined. This analytical technique permits the effects of seismic line clearance to be compared with the natural variability of specific vegetation associations within a region. In interpreting the results however, there is a confounding effect of line type and year as most of the more recent seismic lines were constructed using a Hydro-ax. Results indicate that Hydro-ax clearing affects vegetation structure less than bulldozing. Most Hydro-ax sites recovered within a few years whereas some sites, bulldozed as early as 1971, particularly tussock grasslands, have not yet recovered.This study provides a significant break-through in the debate about the persistence of seismic impacts on native vegetation. As a rapid preliminary assessment, sampling vegetation structure rather than floristics, provides a cost-effective audit and monitoring technique which can be used by non-specialists in a range of petroleum exploration environments. Any significant structural differences may require more detailed analysis to determine if floristic composition also differed.

scholarly journals Hydraulic fracturing in thick shale basins: problems in identifying faults in the Bowland and Weald Basins, UK

2016 ◽  
Author(s):  
David K. Smythe
Keyword(s):  
Hydraulic Fracturing ◽  
Seismic Reflection ◽  
Upper Jurassic ◽  
Normal Faults ◽  
Regulatory Regime ◽  
Seismic Line ◽  
Seismic Reflection Data ◽  
Reflection Data ◽  
Unconventional Resource ◽  
The Uk

Abstract. North American shale basins differ from their European counterparts in that the latter are one to two orders of magnitude smaller in area, but correspondingly thicker, and are cut or bounded by normal faults penetrating from the shale to the surface. There is thus an inherent risk of groundwater resource contamination via these faults during or after unconventional resource appraisal and development. US shale exploration experience cannot simply be transferred to the UK. The Bowland Basin, with 1900 m of Lower Carboniferous shale, is in the vanguard of UK shale gas development. A vertical appraisal well to test the shale by hydraulic fracturing (fracking), the first such in the UK, triggered earthquakes. Re-interpretation of the 3D seismic reflection data, and independently the well casing deformation data, both show that the well was drilled through the earthquake fault, and did not avoid it, as concluded by the exploration operator. Faulting in this thick shale is evidently difficult to recognise. The Weald Basin is a shallower Upper Jurassic unconventional oil play with stratigraphic similarities to the Bakken play of the Williston Basin, USA. Two Weald licensees have drilled, or have applied to drill, horizontal appraisal wells based on inadequate 2D seismic reflection data coverage. I show, using the data from the one horizontal well drilled to date, that one operator failed identify two small but significant through-going normal faults. The other operator portrayed a seismic line as an example of fault-free structure, but faulting had been smeared out by reprocessing. The case histories presented show that: (1) UK shale exploration to date is characterised by a low degree of technical competence, and (2) regulation, which is divided between four separate authorities, is not up to the task. If UK shale is to be exploited safely: (1) more sophisticated seismic imaging methods need to be developed and applied to both basins, to identify faults in shale with throws as small as 4–5 m, and (2) the current lax and inadequate regulatory regime must be overhauled, unified, and tightened up.

scholarly journals Stratigraphic and tectonic framework of Late Cretaceous and Paleogene strata of southern Aotea Basin, northwest New Zealand

2021 ◽  
Author(s):  
◽  
Callum Skinner
Keyword(s):  
New Zealand ◽  
Late Cretaceous ◽  
System Analysis ◽  
Plate Boundary ◽  
Petroleum Exploration ◽  
Tectonic Activity ◽  
Small Scale ◽  
Southern Boundary ◽  
Seismic Reflection Data ◽  
Reflection Data

<p>Seismic reflection data reveal thick sediment sequences of Late Cretaceous to Paleogene age in the region northwest of Taranaki Basin. A new stratigraphic framework for latest Cretaceous and Paleogene strata is created based on stacking patterns and stratal termination relationships of seismic reflectors. Sequence-bounding reflectors are tied to petroleum exploration wells, including recently-drilled Romney-1, to assign age and paleoenvironment interpretation. I identify the following sequences: (1) a late Haumurian to Teurian (68 – 56 Ma) aggradational shelf sequence, with at least two regressional events linked to eustatic sea-level falls; (2) a diachronous deepening of the basin that progressed from north to south during the late Waipawan to Heretaungan (53 – 46 Ma); (3) small-scale volcanism at the southern boundary with Taranaki Basin is contemporaneous with this deepening; (4) a prograding delta on Challenger Plateau during the Porangan to Runangan (46 – 35 Ma) that is evidence for tectonic uplift of the basin margins; and (5) an onlapping sequence from latest Runangan to present (35 – 0 Ma) that indicates Challenger Plateau subsided 1,300 m. A revised set of paleogeography maps and generalised stratigraphic chart summarise these observations. The Eocene phase (52-46 Ma) of tectonic subsidence and diffuse volcanism is one of the earliest signs of tectonic activity associated with development of the Cenozoic plate boundary through New Zealand. Petroleum system analysis reveals that southern Aotea Basin is prospective for petroleum exploration, with 3 plays identified in the Late Haumurian to Teurian (79 – 56 Ma) strata, in spite of Romney-1 proving unsuccessful.</p>

Sign in / Sign up

Export Citation Format

Share Document