Low-cost map overlay analysis using computer-aided design

1989 ◽  
Vol 16 (4) ◽  
pp. 377-391 ◽  
Author(s):  
L S Yapa
Keyword(s):  
Computer Aided Design ◽  
Low Cost ◽  
Overlay Analysis ◽  
Computer Aided ◽  
Aided Design

scholarly journals Computer Numerically Controlled Drawing Robot Based on Computer-Aided Design

2021 ◽  
Author(s):  
Antor Mahamudul Hashan ◽  
Abdullah Haidari ◽  
Srishti Saha ◽  
Titas Paul
Keyword(s):  
Open Source ◽  
Computer Aided Design ◽  
Low Cost ◽  
Rapid Development ◽  
Main Idea ◽  
Numerical Control ◽  
Computer Aided ◽  
Complex Circuits ◽  
Open Source Hardware ◽  
Aided Design

Due to the rapid development of technology, the use of numerically controlled machines in the industry is increasing. The main idea behind this paper is computer-aided design (CAD) based low-cost computer numerical control 2D drawing robot that can accurately draw complex circuits, diagrams, logos, etc. The system is created using open-source hardware and software, which makes it available at a low cost. The open-source LibreCAD application has been used for computer-aided design. Geometric data of a CAD model is converted to coordinate points using the python-based F-Engrave application. This system uses the Arduino UNO board as a signal generator of the universal g-code sender without compromising the performance. The proposed drawing robot is designed as a low-cost robot for educational purposes and aims to increase the student's interest in robotics and computer-aided design (CAD) skills to the next level. The drawing robot structure has been developed, and it meets the requirements of low cost with satisfactory experimental results.

Sensible Pathways for Sensorium-Gameness Integration and Embedment in Design Tools for Multi-Phase Iterative Creative Synthesis in Design and Engineering Processes

2017 ◽  
Author(s):  
Robert E. Wendrich
Keyword(s):  
User Interfaces ◽  
Computer Aided Design ◽  
Low Cost ◽  
Sensor Technology ◽  
Design Tools ◽  
Tangible User Interfaces ◽  
Ongoing Research ◽  
Computer Aided ◽  
Multi Phase ◽  
Aided Design

Current and ongoing research and experimentations in the creation, design and build of low-cost, high-value prototypes for novel and unconventional interaction devices (IxD) in combination with cyber-physical system (CPS) (i.e. hybrid design tools (HDT), blended spaces) tangible user interfaces (TUI) and use of sensor technology lead to a variety of novel interaction modalities, experiences and possibilities. In line with this research, we propose a first prototype Human Sensor Selection Tool (HSST) as a preliminary guide and guidelines for design and engineering domains. The HSST is based on and inspired by the ‘five human senses’ [1], a plethora in human body signals (e.g. proprioceptive, vestibular) and gestures (e.g. facial expression, (e-)motions) that could be integrated, translated, transformed, adapted or mimicked to enhance and enrich the interaction modalities with for example computer-aided design (CAD), computer-aided technologies (CAx), and effectively affective CPS.

scholarly journals Application of LEGO Mindstorms Kits for Teaching Mechatronics Engineering

2017 ◽  
Vol 5 (10) ◽  
pp. 99-113 ◽  
Author(s):  
Rogério Sales Gonçalves
Keyword(s):  
Everyday Life ◽  
Student Learning ◽  
Computer Aided Design ◽  
Low Cost ◽  
Educational Experiences ◽  
Teaching Methodologies ◽  
The Third ◽  
Computer Aided ◽  
Lego Mindstorms ◽  
Aided Design

One of the major educators’ challenges is to teach the theoretical lessons with practical examples that can be taught in the classroom or teaching laboratories. The application of these examples will face a major problem for students in engineering: the difficulty of understanding and seeing how a mechatronic device works in everyday life. This requires the use of tools that enable the construction of different low cost prototypes to assist in student learning. Another challenge to educators is the need to motivate students during the lessons and to present models that students can make and develop on their own. Within this context this paper presents a pedagogic proposition based on the use of LEGO Mindstorms kits to teach practical lab activities in a mechatronics engineering course. The objective is to develop teaching methodologies with the use of these LEGO kits in order to motivate the students and also to promote a higher interdisciplinarity, by proposing projects that unify different disciplines. Thus, the paper is divided into three parts according to the educational experiences implemented in the course of mechatronics engineering at the Federal University of Uberlândia, Brazil. The first part presents the use of the kits in robotics discipline. The second part presents the use of the virtual kits in the Computer Aided Design discipline with zero-cost. The third part presents a multi-disciplinary project EDROM in mechatronics using LEGO kits.

scholarly journals Laboratory sprayer for testing of microbial biocontrol agents: design and calibration

2020 ◽  
Author(s):  
Z. Erdos ◽  
P. Halswell ◽  
A. Matthews ◽  
B. Raymond
Keyword(s):  
3D Printing ◽  
Computer Aided Design ◽  
Low Cost ◽  
Microbial Control ◽  
Droplet Deposition ◽  
Computer Aided ◽  
Spore Deposition ◽  
Microbial Biocontrol Agents ◽  
Bioassay Data ◽  
Aided Design

AbstractThe lack of commercially available low-cost laboratory spraying equipment for testing microbial control agents can hinder advancement in the field of biocontrol. This study presents an inexpensive, portable sprayer that is calibrated utilizing laboratory consumables. The computer aided design files are made available so that it is freely modifiable and can be used for machine routing or 3D printing. Bioassay data was obtained by spraying Myzus persicae with spores of entomopathogenic fungi. Observed variation in droplet deposition within tested pressure and volume settings, and spore deposition within sprayed concentrations were low. Bioassay results show reproducible mortality for the tested doses.

scholarly journals Design and manufacturing of patient-specific orthodontic appliances by computer-aided engineering techniques

2017 ◽  
Vol 232 (1) ◽  
pp. 54-66 ◽  
Author(s):  
Sandro Barone ◽  
Paolo Neri ◽  
Alessandro Paoli ◽  
Armando Viviano Razionale
Keyword(s):  
Computer Aided Design ◽  
Low Cost ◽  
Element Model ◽  
Patient Specific ◽  
Orthodontic Appliances ◽  
Digital Reconstruction ◽  
Computer Aided ◽  
Design And Manufacturing ◽  
Aided Design ◽  
Low Cost Manufacturing

Orthodontic treatments are usually performed using fixed brackets or removable oral appliances, which are traditionally made from alginate impressions and wax registrations. Among removable devices, eruption guidance appliances are used for early orthodontic treatments in order to intercept and prevent malocclusion problems. Commercially available eruption guidance appliances, however, are symmetric devices produced using a few standard sizes. For this reason, they are not able to meet all the specific patient’s needs since the actual dental anatomies present various geometries and asymmetric conditions. In this article, a computer-aided design-based methodology for the design and manufacturing of a patient-specific eruption guidance appliances is presented. The proposed approach is based on the digitalization of several steps of the overall process: from the digital reconstruction of patients’ anatomies to the manufacturing of customized appliances. A finite element model has been developed to evaluate the temporomandibular joint disks stress level caused by using symmetric eruption guidance appliances with different teeth misalignment conditions. The developed model can then be used to guide the design of a patient-specific appliance with the aim at reducing the patient discomfort. At this purpose, two different customization levels are proposed in order to face both arches and single tooth misalignment issues. A low-cost manufacturing process, based on an additive manufacturing technique, is finally presented and discussed.

Sign in / Sign up

Export Citation Format

Share Document