An Empirical Study of Some Zone-Design Criteria

1978 ◽  
Vol 10 (7) ◽  
pp. 781-794 ◽  
Author(s):  
S Openshaw
Keyword(s):  
Linear Regression ◽  
Empirical Study ◽  
Regression Model ◽  
Linear Regression Model ◽  
General Purpose ◽  
Design Criteria ◽  
Aggregated Data

The results obtained from studies of spatially aggregated data are not independent of the choice of zoning system. The paper investigates the effects of different zone-design criteria on a linear-regression model. It is concluded that there is unlikely to be either a simple or general-purpose solution to the problem.

scholarly journals Stochastic Design Criteria in Linear Models

2016 ◽  
Vol 34 (2) ◽  
Author(s):  
Alexander Zaigraev
Keyword(s):  
Optimal Design ◽  
Linear Regression ◽  
Regression Model ◽  
Linear Regression Model ◽  
Linear Models ◽  
Design Criteria ◽  
Efficient Design ◽  
Linear Fit ◽  
Classical Linear Regression ◽  
Line Fit Model

Within the framework of classical linear regression model stochastic optimal design criteria are considered. As examples a line fit model and a k-way linear fit model are taken. If the optimal design does not exist, an approach consisting in choosing the efficient design is suggested.

Physico-Chemical Analysis of Groundwater and Effect of Climatic Change in Angul-Talcher Area

2018 ◽  
Vol 6 (12) ◽  
pp. 26
Author(s):  
Aliva Bera ◽  
D.P. Satapathy
Keyword(s):  
Water Resources ◽  
Linear Regression ◽  
Regression Model ◽  
Climatic Change ◽  
Linear Regression Model ◽  
Ann Model ◽  
Quality Of Water ◽  
Physico Chemical ◽  
Simulation Based

In this paper, the linear regression model using ANN and the linear regression model using MS Excel were developed to estimate the physico-chemical concentrations in groundwater using pH, EC, TDS, TH, HCO3 as input parameters and Ca, Mg and K as output parameters. A comparison was made which indicated that ANN model had the better ability to estimate the physic-chemical concentrations in groundwater. An analytical survey along with simulation based tests for finding the climatic change and its effect on agriculture and water bodies in Angul-Talcher area is done. The various seasonal parameters such as pH, BOD, COD, TDS,TSS along with heavy elements like Pb, Cd, Zn, Cu, Fe, Mn concentration in water resources has been analyzed. For past 30 years rainfall data has been analyzed and water quality index values has been studied to find normal and abnormal quality of water resources and matlab based simulation has been done for performance analysis. All results has been analyzed and it is found that the condition is stable. 

Prediction of Surface Roughness and Optimization of Cutting Parameters in CNC Turning of Rotational Features

2020 ◽  
Vol 38 (8A) ◽  
pp. 1143-1153
Author(s):  
Yousif K. Shounia ◽  
Tahseen F. Abbas ◽  
Raed R. Shwaish
Keyword(s):  
Surface Roughness ◽  
Linear Regression ◽  
Regression Model ◽  
Linear Regression Model ◽  
Feed Rate ◽  
Cutting Parameters ◽  
Spindle Speed ◽  
Depth Of Cut ◽  
Non Linear ◽  
Optimization Of Cutting Parameters

This research presents a model for prediction surface roughness in terms of process parameters in turning aluminum alloy 1200. The geometry to be machined has four rotational features: straight, taper, convex and concave, while a design of experiments was created through the Taguchi L25 orthogonal array experiments in minitab17 three factors with five Levels depth of cut (0.04, 0.06, 0.08, 0.10 and 0.12) mm, spindle speed (1200, 1400, 1600, 1800 and 2000) r.p.m and feed rate (60, 70, 80, 90 and 100) mm/min. A multiple non-linear regression model has been used which is a set of statistical extrapolation processes to estimate the relationships input variables and output which the surface roughness which prediction outside the range of the data. According to the non-linear regression model, the optimum surface roughness can be obtained at 1800 rpm of spindle speed, feed-rate of 80 mm/min and depth of cut 0.04 mm then the best surface roughness comes out to be 0.04 μm at tapper feature at depth of cut 0.01 mm and same spindle speed and feed rate pervious which gives the error of 3.23% at evolution equation.

An Enhanced Multiple Linear Regression Model for Seasonal Rainfall Prediction

2020 ◽  
Vol 10 (4) ◽  
pp. 473-483
Author(s):  
Pundra Chandra Shaker Reddy ◽  
Alladi Sureshbabu
Keyword(s):  
Linear Regression ◽  
Regression Model ◽  
Multiple Linear Regression ◽  
Linear Regression Model ◽  
Weather Prediction ◽  
Big Data Analytics ◽  
Multiple Linear Regression Model ◽  
Seasonal Rainfall ◽  
Climate Data ◽  
Rainfall Forecasting

Aims & Background: India is a country which has exemplary climate circumstances comprising of different seasons and topographical conditions like high temperatures, cold atmosphere, and drought, heavy rainfall seasonal wise. These utmost varieties in climate make us exact weather prediction is a challenging task. Majority people of the country depend on agriculture. Farmers require climate information to decide the planting. Weather prediction turns into an orientation in farming sector to deciding the start of the planting season and furthermore quality and amount of their harvesting. One of the variables are influencing agriculture is rainfall. Objectives & Methods: The main goal of this project is early and proper rainfall forecasting, that helpful to people who live in regions which are inclined natural calamities such as floods and it helps agriculturists for decision making in their crop and water management using big data analytics which produces high in terms of profit and production for farmers. In this project, we proposed an advanced automated framework called Enhanced Multiple Linear Regression Model (EMLRM) with MapReduce algorithm and Hadoop file system. We used climate data from IMD (Indian Metrological Department, Hyderabad) in 1901 to 2002 period. Results: Our experimental outcomes demonstrate that the proposed model forecasting the rainfall with better accuracy compared with other existing models. Conclusion: The results of the analysis will help the farmers to adopt effective modeling approach by anticipating long-term seasonal rainfall.

scholarly journals Vitamin A and E Homologues Impacting the Fate of Acrylamide in Equimolar Asparagine-Glucose Model System

Antioxidants ◽  
2021 ◽  
Vol 10 (7) ◽  
pp. 993
Author(s):  
Su Lee Kuek ◽  
Azmil Haizam Ahmad Tarmizi ◽  
Raznim Arni Abd Razak ◽  
Selamat Jinap ◽  
Maimunah Sanny
Keyword(s):  
Vitamin E ◽  
Linear Regression ◽  
Vitamin A ◽  
Regression Model ◽  
Linear Regression Model ◽  
Model System ◽  
Concentration Increase ◽  
Acrylamide Formation ◽  
Β Carotene

This study aims to evaluate the influence of Vitamin A and E homologues toward acrylamide in equimolar asparagine-glucose model system. Vitamin A homologue as β-carotene (BC) and five Vitamin E homologues, i.e., α-tocopherol (AT), δ-tocopherol (DT), α-tocotrienol (ATT), γ-tocotrienol (GTT), and δ-tocotrienol (DTT), were tested at different concentrations (1 and 10 µmol) and subjected to heating at 160 °C for 20 min before acrylamide quantification. At lower concentrations (1 µmol; 431, 403, 411 ppm, respectively), AT, DT, and GTT significantly increase acrylamide. Except for DT, enhancing concentration to 10 µmol (5370, 4310, 4250, 3970, and 4110 ppm, respectively) caused significant acrylamide formation. From linear regression model, acrylamide concentration demonstrated significant depreciation over concentration increase in AT (Beta = −83.0, R2 = 0.652, p ≤ 0.05) and DT (Beta = −71.6, R2 = 0.930, p ≤ 0.05). This study indicates that different Vitamin A and E homologue concentrations could determine their functionality either as antioxidants or pro-oxidants.

Sign in / Sign up

Export Citation Format

Share Document