Thermal regime of the radiation chamber of the butane-propane pyrolysis furnace

2021 ◽  
Author(s):  
Danil Vafin
Keyword(s):  
Thermal Regime ◽  
Pyrolysis Furnace

MONITORING OF THE THERMOABRASIONAL AND ACCUMULATIVE COASTS NEAR THE UNDERWATER GAS PIPELINE ROUTE ACROSS THE BAYDARATSKAYA BAY, KARA SEA

2017 ◽  
Author(s):  
Nataliya Belova ◽  
Nataliya Belova ◽  
Alisa Baranskaya ◽  
Alisa Baranskaya ◽  
Osip Kokin ◽  
...  
Keyword(s):  
Thermal Regime ◽  
Storm Surges ◽  
Gas Pipeline ◽  
The Arctic ◽  
Yamal Peninsula ◽  
Permafrost Degradation ◽  
Nearshore Zone ◽  
Barrier Beach ◽  
Energy Dissipater ◽  
Pipeline Route

The coasts of Baydaratskaya Bay are composed by loose frozen sediments. At Yamal Peninsula accumulative coasts are predominant at the site where pipeline crosses the coast, while thermoabrasional coast are prevail at the Ural coast crossing site. Coastal dynamics monitoring on both sites is conducted using field and remote methods starting from the end of 1980s. As a result of construction in the coastal zone the relief morphology was disturbed, both lithodynamics and thermal regime of the permafrost within the areas of several km around the sites where gas pipeline crosses coastline was changed. At Yamal coast massive removal of deposits from the beach and tideflat took place. The morphology of barrier beach, which previously was a natural wave energy dissipater, was disturbed. This promoted inland penetration of storm surges and permafrost degradation under the barrier beach. At Ural coast the topsoil was disrupted by construction trucks, which affected thermal regime of the upper part of permafrost and lead to active layer deepening. Thermoerosion and thermoabrasion processes have activated on coasts, especially at areas with icy sediments, ice wedges and massive ice beds. Construction of cofferdams resulted in overlapping of sediments transit on both coasts and caused sediment deficit on nearby nearshore zone areas. The result of technogenic disturbances was widespread coastal erosion activation, which catastrophic scale is facilitated by climate warming in the Arctic.

AUTONOMOUS HEAT SUPPORT SYSTEM OF ELECTRONIC BLOCKS OF SPACE APPLIANCES

2018 ◽  
pp. 72-78
Author(s):  
A. V. Gorbunov ◽  
Yu. A. Zhukov ◽  
E. V. Korotkov ◽  
A. V. Lekanov ◽  
V. G. Porpylev ◽  
...  
Keyword(s):  
Thermal Regime ◽  
Autonomous System ◽  
Supply Voltage ◽  
Operating Temperature ◽  
Electronic Devices ◽  
Space Technology ◽  
Structural Scheme ◽  
Spacecraft Design ◽  
Temperature Controlled ◽  
Operating Temperature Range

The vast majority of electronic devices on-Board Russian spacecraft is placed on a temperature-controlled mounting surface is ON, however, in some tasks there is a necessity to place a separate electronic units out thermostated panels on remote spacecraft design. The article presents an autonomous system of providing thermal regime of electronic blocks of spacecraft and objects of space technology that require maintaining the operating temperature and are unable to be installed on the thermostatic landing surfaces of spacecraft. The proposed autonomous system of providing thermal regime can operate autonomously in the extended operating temperature range of the installation surface from -80 to +80 °C when the supply voltage changes in the range from 75 to 550% of the nominal value. The review of the existing solutions is presented, the substantiation of the proposed decision is given, the structural scheme of autonomous system of providing thermal regime is given and its description and an example of application is given.

Sign in / Sign up

Export Citation Format

Share Document