Hybrid wall design of soil nail and ground anchor

2021 ◽  
Author(s):  
F. Fortuna ◽  
H. Yassin
Keyword(s):  
Soil Nail ◽  
Ground Anchor

Results of an Instrumented Helical Soil Nail Wall

2010 ◽  
Author(s):  
Donald Deardorff ◽  
Mike Moeller ◽  
Eric Walt
Keyword(s):  
Soil Nail ◽  
Soil Nail Wall

Influence of soil nail orientations on stabilizing mechanisms of loose fill slopes

2013 ◽  
Vol 50 (12) ◽  
pp. 1236-1249 ◽  
Author(s):  
C.Y. Cheuk ◽  
K.K.S. Ho ◽  
A.Y.T. Lam
Keyword(s):  
Earth Pressure ◽  
Slope Movement ◽  
Numerical Analyses ◽  
Soil Nails ◽  
Soil Nail ◽  
Static Liquefaction ◽  
Liquefaction Failure ◽  
Loose Fill ◽  
Typical Design

Soil nailing has been used to upgrade substandard loose fill slopes in Hong Kong. Due to the possibility of static liquefaction failure, a typical design arrangement comprises a structural slope facing anchored by a grid of soil nails bonded into the in situ ground. Numerical analyses have been conducted to examine the influence of soil nail orientations on the behaviour of the ground nail–facing system. The results suggest that the use of steeply inclined nails throughout the entire slope could avoid global instability, but could lead to significant slope movement especially when sliding failure prevails, for instance, due to interface liquefaction. The numerical analyses also demonstrate that if only subhorizontal nails are used, the earth pressure exerted on the slope facing may cause uplift failure of the slope cover. To overcome the shortcomings of using soil nails at a single orientation, a hybrid nail arrangement comprising nails at two different orientations is proposed. The numerical analyses illustrate that the hybrid nail arrangement would limit slope movement and enhance the robustness of the system.

On Numerical Simulation of the Stepped Soil-Nail Wall

2013 ◽  
Vol 353-356 ◽  
pp. 692-695
Author(s):  
Chang Zhi Zhu ◽  
Quan Chen Gao
Keyword(s):  
Numerical Simulation ◽  
Numerical Analysis ◽  
Internal Force ◽  
Numerical Results ◽  
Analysis Model ◽  
Foundation Pit ◽  
Soil Nails ◽  
Soil Nail ◽  
Soil Nail Wall ◽  
Design And Construction

Based on an Engineering Example which was supported by the stepped soil-nail wall, a numerical analysis model was established by FLAC3D,and the process of the excavation and supporting was simulated, and the numerical results of the soil nails internal force and foundation pit deformation were obtained. The simulated result was consistent with the measured results. It shows that the method of FLAC3D numerical analysis can be used to the numerical analysis of foundation pit excavation and supporting, and it will provide the basis for the design and construction of practice project.

Experimental Research on Interfacial Bond Performance in Rock Anchor with High-Performance Grouting Medium

2012 ◽  
Vol 517 ◽  
pp. 932-938 ◽  
Author(s):  
Zhi Fang ◽  
Hong Qiao Zhang
Keyword(s):  
Rock Mass ◽  
Bond Strength ◽  
High Performance ◽  
Interfacial Bond ◽  
Interfacial Bond Strength ◽  
Bond Performance ◽  
Pull Out ◽  
Steel Bar ◽  
Reactive Powder ◽  
Ground Anchor

There exist the problems such as low bond strength and bad durability in the ordinary grouting slurry of the ground anchor system at present. The high-performance grouting mediums RPC (Reactive Powder Concrete) and DSP (Densified Systems containing homogeneously arranged ultrafine Particles) would become the potential replacement of grouting medium in ground anchor resulting from their high compressive strength, durability and toughness. Based on a series of pull-out tests on ground anchors with different high-performance grouting medium of RPC and DSP , different bond length in the construction field, the bond performance on the interfaces between anchor bolt (deformed steel bar) and grouted medium as well as between grouted medium and rock mass was studied. The results indicate that the interfacial bond strength between RPC or DSP and deformed steel bolt ranges within 23-31Mpa, far greater than that (about 2-3MPa) between the ordinary cementitious grout and deformed steel bar. Even though the interfacial bond strength between the grouted medium and rock mass of limestone was not obtained in the test since the failure mode was pull-out of those steel bar rather than the interface shear failure between grouted medium and rock mass, the bond stress on the interface reached 6.2-8.38 MPa, also far greater than the bond strength (about 0.1-3MPa) between the ordinary cementitious slurry and rocks.

scholarly journals Net load–displacement estimation in soil-nail pullout tests

2017 ◽  
Vol 170 (6) ◽  
pp. 534-547 ◽  
Author(s):  
Hyung-Joon Seo ◽  
Loizos Pelecanos ◽  
Young-Sam Kwon ◽  
In-Mo Lee
Keyword(s):  
Displacement Estimation ◽  
Soil Nail ◽  
Pullout Tests ◽  
Load Displacement ◽  
Net Load

scholarly journals Seismic analysis of soil nail performance in deep excavation

2016 ◽  
Vol 7 (1) ◽  
Author(s):  
Md. Khaja Moniuddin ◽  
P. Manjularani ◽  
L. Govindaraju
Keyword(s):  
Seismic Analysis ◽  
Deep Excavation ◽  
Soil Nail
Sign in / Sign up

Export Citation Format

Share Document