Comparative analysis of commercial and herbal extorted cough syrups in Tamilnadu (South India) Zone - An investigation by methodologies of spectral way and high frequency (ultrasonic) waves to predict samples efficacy

2022 ◽  
Author(s):  
P. Padmavathi ◽  
Senthil Kannan K. ◽  
Jessie Fernando ◽  
J. Poongodi ◽  
B. Vijayalakshmi ◽  
...  
Keyword(s):  
Comparative Analysis ◽  
High Frequency ◽  
South India ◽  
Ultrasonic Waves

scholarly journals Couplinator: A simple computational tool for synthesis of multi-section coupled-line filter based on MPCM-TLM technique

2021 ◽  
pp. 1-10
Author(s):  
E. Faghand ◽  
S. Karimian ◽  
E. Mehrshahi ◽  
N. Karimian
Keyword(s):  
Comparative Analysis ◽  
Transmission Line ◽  
High Frequency ◽  
Computational Tool ◽  
Cad Tools ◽  
Coupled Line ◽  
High Frequency Structure Simulator ◽  
Transmission Line Method ◽  
Set Up ◽  
Planar Circuit

Abstract A new simple computational tool is proposed for the synthesis of multi-section coupled-line filters based on combined modified planar circuit method (MPCM) and transmission line method (TLM) analysis, referred to as MPCM-TLM. Due to its fundamentally simple architecture, the presented tool offers significantly faster optimization of coupled-line filters – for exactly the same initial simulation set-up – than other costly commercially-available tools, giving equally reliable results. Validity and accuracy of the proposed tool have been verified through the design of 3rd, 5th, and 7th order coupled-line filters and comparative analysis between results obtained from the proposed approach and the high-frequency structure simulator. A remarkable 99% time reduction in the analysis is recorded in the case of 7th order filter using the proposed tool, for almost identical results to HFSS. Therefore, it can be confidently claimed that the proposed technique can be used as a reliable alternative to existing complex, costly, processor-intensive CAD tools.

Analysis and Optimization of Conformal Patch Excited Wideband DRA of Several Shapes

Frequenz ◽  
2018 ◽  
Vol 72 (5-6) ◽  
pp. 197-208 ◽  
Author(s):  
Pramod Kumar ◽  
Santanu Dwari ◽  
Shailendra Singh ◽  
Ashok Kumar ◽  
N. K. Agrawal ◽  
...  
Keyword(s):  
Comparative Analysis ◽  
Frequency Spectrum ◽  
High Frequency ◽  
Unit Volume ◽  
Experimental Results ◽  
Impedance Bandwidth ◽  
High Frequency Structure Simulator ◽  
Triangular Shape ◽  
Operating Band ◽  
Peak Gain

AbstractIn this paper various shapes of DR antennas excited by common feed have been proposed and successfully implemented for wideband applications. Proposed structures are Hemispherical, Arrow-shaped and Triangular DRA, while common excited feed is inverted trapezoidal conformal patch. These shapes of DR offer significant optimization in several parameters such as impedance bandwidth, peak gain and bandwidth per unit volume of the antenna. By using inverted trapezoidal patch feed mechanism an impedance bandwidth (VSWR<2) of about 63 % for hemispherical shape, 66 % for arrow shape, and 72 % for triangular shape DRA has been achieved with maximum bandwidth per unit volume. Proposed wideband DRAs i. e. triangular, hemispherical, and arrow shapes of DR antennas cover almost complete C-band (4 GHz–8 GHz) frequency spectrum of microwave. The average peak gain within the operating band for hemispherical, arrow, and triangular shape DRA are about 5, 5.4, and 5.5 dB respectively. A comparative analysis of proposed structures for various antenna parameters has been analyzed by HFSS (High-Frequency Structure Simulator) and validated by experimental results.

scholarly journals High Frequency Ultrasonic Wave Propagation in  Anisotropic Materials

2021 ◽  
Author(s):  
◽  
Andrew Paul Dawson
Keyword(s):  
Wave Propagation ◽  
Ultrasonic Wave ◽  
High Frequency ◽  
Guided Wave ◽  
Ultrasonic Waves ◽  
Tissue Characterisation ◽  
Ultrasonic Wave Propagation ◽  
Matching Layer ◽  
Fibrous Tissues ◽  
Wave Modes

<p>The influence of highly regular, anisotropic, microstructured materials on high frequency ultrasonic wave propagation was investigated in this work. Microstructure, often only treated as a source of scattering, significantly influences high frequency ultrasonic waves, resulting in unexpected guided wave modes. Tissues, such as skin or muscle, are treated as homogeneous by current medical ultrasound systems, but actually consist of highly anisotropic micron-sized fibres. As these systems increase towards 100 MHz, these fibres will significantly influence propagating waves leading to guided wave modes. The effect of these modes on image quality must be considered. However, before studies can be undertaken on fibrous tissues, wave propagation in more ideal structures must be first understood. After the construction of a suitable high frequency ultrasound experimental system, finite element modelling and experimental characterisation of high frequency (20-200 MHz) ultrasonic waves in ideal, collinear, nanostructured alumina was carried out. These results revealed interesting waveguiding phenomena, and also identified the potential and significant advantages of using a microstructured material as an alternative acoustic matching layer in ultrasonic transducer design. Tailorable acoustic impedances were achieved from 4-17 MRayl, covering the impedance range of 7-12 MRayl most commonly required by transducer matching layers. Attenuation coefficients as low as 3.5 dBmm-1 were measured at 100 MHz, which is excellent when compared with 500 dBmm-1 that was measured for a state of the art loaded epoxy matching layer at the same frequency. Reception of ultrasound without the restriction of critical angles was also achieved, and no dispersion was observed in these structures (unlike current matching layers) until at least 200 MHz. In addition, to make a significant step forward towards high frequency tissue characterisation, novel microstructured poly(vinyl alcohol) tissue-mimicking phantoms were also developed. These phantoms possessed acoustic and microstructural properties representative of fibrous tissues, much more realistic than currently used homogeneous phantoms. The attenuation coefficient measured along the direction of PVA alignment in an example phantom was 8 dBmm-1 at 30 MHz, in excellent agreement with healthy human myocardium. This method will allow the fabrication of more realistic and repeatable phantoms for future high frequency tissue characterisation studies.</p>

Comparative Analysis of Magnet Thermal and Magnetization State Monitoring in PMSMs Based on High-Frequency Signal Injection

2020 ◽  
Vol 56 (1) ◽  
pp. 344-357
Author(s):  
Daniel Fernandez ◽  
Maria Martinez ◽  
David Reigosa ◽  
Alberto B. Diez ◽  
Juan Manuel Guerrero ◽  
...  
Keyword(s):  
Comparative Analysis ◽  
High Frequency ◽  
State Monitoring ◽  
Frequency Signal ◽  
High Frequency Signal ◽  
Magnetization State ◽  
Signal Injection
Sign in / Sign up

Export Citation Format

Share Document