scholarly journals Effects of nozzle inlet size and curvature on the flow development in a bidirectional vortex chamber

2021 ◽  
Vol 33 (9) ◽  
pp. 093607
Author(s):  
Gaurav Sharma ◽  
Joseph Majdalani
Keyword(s):  
Vortex Chamber ◽  
Flow Development ◽  
Nozzle Inlet

scholarly journals Interactions between Tandem Cylinders in an Open Channel: Impact on Mean and Turbulent Flow Characteristics

Water ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 1718
Author(s):  
Hasan Zobeyer ◽  
Abul B. M. Baki ◽  
Saika Nowshin Nowrin
Keyword(s):  
Turbulent Flow ◽  
Open Channel ◽  
Recirculation Zone ◽  
Three Dimensional ◽  
Flow Characteristics ◽  
Flow Recirculation ◽  
Tandem Cylinders ◽  
Flow Development ◽  
The Mean ◽  
Recirculation Length

The flow hydrodynamics around a single cylinder differ significantly from the flow fields around two cylinders in a tandem or side-by-side arrangement. In this study, the experimental results on the mean and turbulence characteristics of flow generated by a pair of cylinders placed in tandem in an open-channel flume are presented. An acoustic Doppler velocimeter (ADV) was used to measure the instantaneous three-dimensional velocity components. This study investigated the effect of cylinder spacing at 3D, 6D, and 9D (center to center) distances on the mean and turbulent flow profiles and the distribution of near-bed shear stress behind the tandem cylinders in the plane of symmetry, where D is the cylinder diameter. The results revealed that the downstream cylinder influenced the flow development between cylinders (i.e., midstream) with 3D, 6D, and 9D spacing. However, the downstream cylinder controlled the flow recirculation length midstream for the 3D distance and showed zero interruption in the 6D and 9D distances. The peak of the turbulent metrics generally occurred near the end of the recirculation zone in all scenarios.

scholarly journals Numerical Study toward Optimization of Spray Drying in a Novel Radial Multizone Dryer

Energies ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1233
Author(s):  
Umair Jamil Ur Rahman ◽  
Artur Krzysztof Pozarlik ◽  
Thomas Tourneur ◽  
Axel de Broqueville ◽  
Juray De Wilde ◽  
...  
Keyword(s):  
Spray Drying ◽  
Droplet Size ◽  
Separation Efficiency ◽  
Numerical Study ◽  
Three Dimensional ◽  
Droplet Size Distribution ◽  
Vortex Chamber ◽  
Temperature Pattern ◽  
Multiphase Model ◽  
Drying Technology

In this paper, an intensified spray-drying process in a novel Radial Multizone Dryer (RMD) is analyzed by means of CFD. A three-dimensional Eulerian–Lagrangian multiphase model is applied to investigate the effect of solids outlet location, relative hot/cold airflow ratio, and droplet size on heat and mass transfer characteristics, G-acceleration, residence time, and separation efficiency of the product. The results indicate that the temperature pattern in the dryer is dependent on the solids outlet location. A stable, symmetric spray behavior with maximum evaporation in the hot zone is observed when the solids outlet is placed at the periphery of the vortex chamber. The maximum product separation efficiency (85 wt %) is obtained by applying high G-acceleration (at relative hot/cold ratio of 0.75) and narrow droplet size distribution (45–70 µm). The separation of different sized particles with distinct drying times is also observed. Smaller particles (<32 µm) leave the reactor via the gas outlet, while the majority of big particles leave it via the solids outlet, thus depicting in situ particle separation. The results revealed the feasibility and benefits of a multizone drying operation and that the RMD can be an attractive solution for spray drying technology.

scholarly journals Influence of microjets on flow development for diameter ratio of 1.6 for correctly expanded nozzles

2021 ◽  
Author(s):  
Mohammed Faheem ◽  
Rayid Muneer ◽  
Mohammed Avvad ◽  
Mohammed Aneeque ◽  
Sher Afghan Khan
Keyword(s):  
Diameter Ratio ◽  
Flow Development

Pressure, temperature and helium mass flow development during a quench in the UNK superconducting magnet system

1992 ◽  
Vol 28 (1) ◽  
pp. 186-189 ◽  
Author(s):  
V.I. Deev ◽  
V.S. Kharitonov ◽  
V.V. Shako ◽  
A.I. Ageyev ◽  
S.R. Bakhuliev ◽  
...  
Keyword(s):  
Mass Flow ◽  
Superconducting Magnet ◽  
Magnet System ◽  
Flow Development ◽  
Superconducting Magnet System
Sign in / Sign up

Export Citation Format

Share Document