scholarly journals The effect of Schmidt number on gravity current flows: The formation of large-scale three-dimensional structures

2021 ◽  
Vol 33 (10) ◽  
pp. 106601
Author(s):  
C. R. Marshall ◽  
R. M. Dorrell ◽  
S. Dutta ◽  
G. M. Keevil ◽  
J. Peakall ◽  
...  
Keyword(s):  
Large Scale ◽  
Schmidt Number ◽  
Gravity Current ◽  
Three Dimensional ◽  
Current Flows

scholarly journals Lagrangian coherent structures and entrainment near the turbulent/non-turbulent interface of a gravity current

2019 ◽  
Vol 877 ◽  
pp. 824-843 ◽  
Author(s):  
Marius M. Neamtu-Halic ◽  
Dominik Krug ◽  
George Haller ◽  
Markus Holzner
Keyword(s):  
Coherent Structures ◽  
Large Scale ◽  
Gravity Current ◽  
Three Dimensional ◽  
Lagrangian Coherent Structures ◽  
Flow Measurements ◽  
Vortical Structures ◽  
Entrainment Velocity ◽  
Extraction Algorithm ◽  
Entrainment Process

In this paper, we employ the theory of Lagrangian coherent structures for three-dimensional vortex eduction and investigate the effect of large-scale vortical structures on the turbulent/non-turbulent interface (TNTI) and entrainment of a gravity current. The gravity current is realized experimentally and different levels of stratification are examined. For flow measurements, we use a multivolume three-dimensional particle tracking velocimetry technique. To identify vortical Lagrangian coherent structures (VLCSs), a fully automated three-dimensional extraction algorithm for multiple flow structures based on the so-called Lagrangian-averaged vorticity deviation method is implemented. The size, the orientation and the shape of the VLCSs are analysed and the results show that these characteristics depend only weakly on the strength of the stratification. Through conditional analysis, we provide evidence that VLCSs modulate the average TNTI height, consequently affecting the entrainment process. Furthermore, VLCSs influence the local entrainment velocity and organize the flow field on both the turbulent and non-turbulent sides of the gravity current boundary.

Gravity current flow past a circular cylinder: forces, wall shear stresses and implications for scour

2010 ◽  
Vol 649 ◽  
pp. 69-102 ◽  
Author(s):  
E. GONZALEZ-JUEZ ◽  
E. MEIBURG ◽  
T. TOKYAY ◽  
G. CONSTANTINESCU
Keyword(s):  
Friction Velocity ◽  
Gravity Current ◽  
Three Dimensional ◽  
Circular Cylinders ◽  
Navier Stokes ◽  
Shear Stresses ◽  
Constant Density ◽  
Steady Stage ◽  
Current Flows ◽  
The Impact

The flow of compositional gravity currents past circular cylinders mounted above a wall is investigated numerically. Two- and three-dimensional Navier–Stokes simulations are employed to quantify the force load on the cylinder, along with the friction velocity at the bottom wall near the cylinder, for Reynolds numbers in the range of 2000–45 000. While two-dimensional simulations accurately capture the impact stage, they are seen to overpredict the force and friction velocity fluctuations throughout the transient stage. Comparisons between gravity current and constant-density flows past circular cylinders show that the impact and transient stages are unique to gravity current flows. During the quasi-steady stage, on the other hand, the wake structures and the values of the drag, the peak-to-peak lift, the vortex shedding frequency and the friction velocity below the cylinder are comparable.The friction velocity below the cylinder depends chiefly on the Reynolds number formed with the front velocity and the gap width. The maximum friction velocity at impact is about 60% larger than during the quasi-steady stage or in a constant-density flow. This raises the possibility of aggressive erosion behaviour at impact, which may occur in a spanwise localized fashion because of the larger friction velocity near the lobes.

scholarly journals A Review on Additive Manufacturing Possibilities for Electrical Machines

Energies ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1940
Author(s):  
Muhammad Usman Naseer ◽  
Ants Kallaste ◽  
Bilal Asad ◽  
Toomas Vaimann ◽  
Anton Rassõlkin
Keyword(s):  
Additive Manufacturing ◽  
Large Scale ◽  
Three Dimensional ◽  
Electrical Machines ◽  
Electromagnetic Properties ◽  
Scale Production ◽  
Performance Parameters ◽  
Large Scale Production ◽  
One Step ◽  
Manufacturing Techniques

This paper presents current research trends and prospects of utilizing additive manufacturing (AM) techniques to manufacture electrical machines. Modern-day machine applications require extraordinary performance parameters such as high power-density, integrated functionalities, improved thermal, mechanical & electromagnetic properties. AM offers a higher degree of design flexibility to achieve these performance parameters, which is impossible to realize through conventional manufacturing techniques. AM has a lot to offer in every aspect of machine fabrication, such that from size/weight reduction to the realization of complex geometric designs. However, some practical limitations of existing AM techniques restrict their utilization in large scale production industry. The introduction of three-dimensional asymmetry in machine design is an aspect that can be exploited most with the prevalent level of research in AM. In order to take one step further towards the enablement of large-scale production of AM-built electrical machines, this paper also discusses some machine types which can best utilize existing developments in the field of AM.

scholarly journals Vibration characteristics of triple-gear-rotor system in compressed air energy storage under variable torque load

2021 ◽  
Vol 104 (1) ◽  
pp. 003685042098705
Author(s):  
Xinran Wang ◽  
Yangli Zhu ◽  
Wen Li ◽  
Dongxu Hu ◽  
Xuehui Zhang ◽  
...  
Keyword(s):  
Large Scale ◽  
Three Dimensional ◽  
Element Model ◽  
Rotor System ◽  
Dynamic Responses ◽  
System Response ◽  
Rotating Speed ◽  
Torque Load ◽  
Set Up ◽  
Two Stages

This paper focuses on the effects of the off-design operation of CAES on the dynamic characteristics of the triple-gear-rotor system. A finite element model of the system is set up with unbalanced excitations, torque load excitations, and backlash which lead to variations of tooth contact status. An experiment is carried out to verify the accuracy of the mathematical model. The results show that when the system is subjected to large-scale torque load lifting at a high rotating speed, it has two stages of relatively strong periodicity when the torque load is light, and of chaotic when the torque load is heavy, with the transition between the two states being relatively quick and violent. The analysis of the three-dimensional acceleration spectrum and the meshing force shows that the variation in the meshing state and the fluctuation of the meshing force is the basic reasons for the variation in the system response with the torque load. In addition, the three rotors in the triple-gear-rotor system studied show a strong similarity in the meshing states and meshing force fluctuations, which result in the similarity in the dynamic responses of the three rotors.

scholarly journals Shell-crossing in a ΛCDM Universe

2020 ◽  
Vol 501 (1) ◽  
pp. L71-L75
Author(s):  
Cornelius Rampf ◽  
Oliver Hahn
Keyword(s):  
Dark Matter ◽  
Perturbation Theory ◽  
Large Scale ◽  
Cold Dark Matter ◽  
Three Dimensional ◽  
Random Initial Data ◽  
Recursion Relations ◽  
Indispensable Tool ◽  
First Time ◽  
Very High

ABSTRACT Perturbation theory is an indispensable tool for studying the cosmic large-scale structure, and establishing its limits is therefore of utmost importance. One crucial limitation of perturbation theory is shell-crossing, which is the instance when cold-dark-matter trajectories intersect for the first time. We investigate Lagrangian perturbation theory (LPT) at very high orders in the vicinity of the first shell-crossing for random initial data in a realistic three-dimensional Universe. For this, we have numerically implemented the all-order recursion relations for the matter trajectories, from which the convergence of the LPT series at shell-crossing is established. Convergence studies performed at large orders reveal the nature of the convergence-limiting singularities. These singularities are not the well-known density singularities at shell-crossing but occur at later times when LPT already ceased to provide physically meaningful results.

scholarly journals Advancing Drug Discovery for Neurological Disorders Using iPSC-Derived Neural Organoids

2021 ◽  
Vol 22 (5) ◽  
pp. 2659
Author(s):  
Gianluca Costamagna ◽  
Giacomo Pietro Comi ◽  
Stefania Corti
Keyword(s):  
Drug Discovery ◽  
Drug Screening ◽  
Neural Development ◽  
Neurological Disorders ◽  
Large Scale ◽  
Three Dimensional ◽  
Induced Pluripotent Stem Cell ◽  
Cellular Level ◽  
Complex Data ◽  
Complex Data Sets

In the last decade, different research groups in the academic setting have developed induced pluripotent stem cell-based protocols to generate three-dimensional, multicellular, neural organoids. Their use to model brain biology, early neural development, and human diseases has provided new insights into the pathophysiology of neuropsychiatric and neurological disorders, including microcephaly, autism, Parkinson’s disease, and Alzheimer’s disease. However, the adoption of organoid technology for large-scale drug screening in the industry has been hampered by challenges with reproducibility, scalability, and translatability to human disease. Potential technical solutions to expand their use in drug discovery pipelines include Clustered Regularly Interspaced Short Palindromic Repeats (CRISPR) to create isogenic models, single-cell RNA sequencing to characterize the model at a cellular level, and machine learning to analyze complex data sets. In addition, high-content imaging, automated liquid handling, and standardized assays represent other valuable tools toward this goal. Though several open issues still hamper the full implementation of the organoid technology outside academia, rapid progress in this field will help to prompt its translation toward large-scale drug screening for neurological disorders.

Large-scale, three-dimensional tissue cytometry of the human kidney: a complete and accessible pipeline

2021 ◽  
Author(s):  
Michael J. Ferkowicz ◽  
◽  
Seth Winfree ◽  
Angela R. Sabo ◽  
Malgorzata M. Kamocka ◽  
...  
Keyword(s):  
Large Scale ◽  
Three Dimensional ◽  
Human Kidney

scholarly journals Prevention of Mountain Disasters and Maintenance of Residential Area through Real-Time Terrain Rendering

2021 ◽  
Vol 13 (5) ◽  
pp. 2950
Author(s):  
Su-Kyung Sung ◽  
Eun-Seok Lee ◽  
Byeong-Seok Shin
Keyword(s):  
Real Time ◽  
Graphics Processing Units ◽  
High Speed ◽  
Large Scale ◽  
Civil Engineering ◽  
Three Dimensional ◽  
Sampled Data ◽  
Residential Areas ◽  
Terrain Rendering ◽  
Mountain Disasters

Climate change increases the frequency of localized heavy rains and typhoons. As a result, mountain disasters, such as landslides and earthworks, continue to occur, causing damage to roads and residential areas downstream. Moreover, large-scale civil engineering works, including dam construction, cause rapid changes in the terrain, which harm the stability of residential areas. Disasters, such as landslides and earthenware, occur extensively, and there are limitations in the field of investigation; thus, there are many studies being conducted to model terrain geometrically and to observe changes in terrain according to external factors. However, conventional topography methods are expressed in a way that can only be interpreted by people with specialized knowledge. Therefore, there is a lack of consideration for three-dimensional visualization that helps non-experts understand. We need a way to express changes in terrain in real time and to make it intuitive for non-experts to understand. In conventional height-based terrain modeling and simulation, there is a problem in which some of the sampled data are irregularly distorted and do not show the exact terrain shape. The proposed method utilizes a hierarchical vertex cohesion map to correct inaccurately modeled terrain caused by uniform height sampling, and to compensate for geometric errors using Hausdorff distances, while not considering only the elevation difference of the terrain. The mesh reconstruction, which triangulates the three-vertex placed at each location and makes it the smallest unit of 3D model data, can be done at high speed on graphics processing units (GPUs). Our experiments confirm that it is possible to express changes in terrain accurately and quickly compared with existing methods. These functions can improve the sustainability of residential spaces by predicting the damage caused by mountainous disasters or civil engineering works around the city and make it easy for non-experts to understand.

Sign in / Sign up

Export Citation Format

Share Document