scholarly journals Shock wave in series connected Josephson transmission line: Theoretical foundations and effects of resistive elements

2021 ◽  
Vol 130 (1) ◽  
pp. 013903
Author(s):  
Eugene Kogan
Keyword(s):  
Shock Wave ◽  
Transmission Line ◽  
In Series ◽  
Josephson Transmission Line ◽  
Theoretical Foundations

scholarly journals AMPLIFIER DESIGN FOR MODELING THE TRANSMISSION OF A DIGITAL VIDEO SIGNAL OVER A DATA TRANSMISSION CHANNEL

2021 ◽  
Vol 445 (1) ◽  
pp. 39-45
Author(s):  
M. Amreev ◽  
R. Safin ◽  
T. Pavlova ◽  
E. Temyrkanova ◽  
Y. Garmashova
Keyword(s):  
Transmission Line ◽  
Video Surveillance ◽  
Video Transmission ◽  
Main Task ◽  
Surveillance Systems ◽  
Video Signals ◽  
Ohmic Resistance ◽  
In Series ◽  
Amplifier Design

The use of video surveillance systems is used in the areas of security, law and order, in the territories of protected objects, in monitoring the movement of road vehicles and in other areas. The main disadvantage of a video surveillance system is its susceptibility to weather influences (rain, fog, snowfall, etc.), which degrades the quality of the video system by reducing the signal level. Therefore, the urgency of finding new ways and possibilities to improve the quality of video signals is one of the priority areas of signal processing. The main task of this work was to determine the main parameters, simulate the transmission line and amplifier, and select the schematic diagram of the transmitting and receiving path with the voltage and current ratings. Both the receiver and the cable video transmitter have different means of adjusting to different transmission line lengths. The signal at the output of each receiver should be in the range from 0.9 to 1.1 V, and the spread of the total ohmic resistance of the wires of the video transmission line at the input of the receiver should be no more than 2 – 3%. Based on these parameters, the equipment is configured for transmitting video over the channel. The magnitude of the mismatch is regulated by potentiometers, which allow smooth adjustment of the video transmission equipment [1]. As a rule, video transmission over the channel is carried out at a distance of 50 to 1500 m. If it is necessary to transmit video at distances less than 50 m, additional resistances are connected in series at the receiver input so that the total line resistance is 30 - 50 Ohm [1].

Spatiotemporal Observation of the Soliton-Antisoliton Collision in a Josephson Transmission Line

1987 ◽  
Vol 59 (25) ◽  
pp. 2895-2898 ◽  
Author(s):  
Akira Fujimaki ◽  
Koji Nakajima ◽  
Yasuji Sawada
Keyword(s):  
Transmission Line ◽  
Josephson Transmission Line

Flexible Metamaterials RF Filters Implemented through Micromachining LCP Substrates

2011 ◽  
Vol 2011 (DPC) ◽  
pp. 000555-000579
Author(s):  
Jonathan Richard ◽  
Robert Dean
Keyword(s):  
Transmission Line ◽  
Transmission Lines ◽  
Flexible Substrate ◽  
Ring Resonators ◽  
Split Ring ◽  
Pass Filter ◽  
Split Ring Resonators ◽  
Wide Range ◽  
In Series ◽  
Invisibility Cloaks

Metamaterials have a wide range of potential uses in areas such as optics, transmission lines, and RF design. The simplest metamaterial structures are Split-Ring Resonators (SRR) and Complementary Split-Ring Resonators (CSSR). Through the combination of various forms of these structures, different applications in the areas previously stated can be achieved. Under this investigation, a metamaterials transmission line was realized through micromachining a Liquid Crystal Polymer (LCP) substrate. Not only does LCP possess useful RF properties, it can also be easily micromachined. This transmission line consisted of several CSSRs in series, which performed as a high-order, high-frequency high-pass filter. This structure was unique to most metamaterial structures because LCP is a flexible substrate. It was observed that the resonant frequency of the filter did not change when the LCP transmission line was flexed in various ways. Next, micromachined vias were etched through the LCP substrate to demonstrate that these features do not affect the filter's response. Through utilization of these vias, the metamaterial structures can be physically conformed to nearly any shape or mounted onto another object without affecting the filter's response. As demonstrated in a simple filter structure, the shape manipulation has very little effect. Theoretically, extrapolating these methods to the development of metamaterials 3D RF invisibility cloaks, that are easily realizable and mountable onto an object, could prove useful.

Sign in / Sign up

Export Citation Format

Share Document