scholarly journals Experimental investigation of disturbances generated by impulse deflection of the membrane in the swept wing boundary layer under the moderate free - Stream turbulence level

2021 ◽  
Author(s):  
M. M. Katasonov ◽  
I. A. Sadovskiy
Keyword(s):  
Boundary Layer ◽  
Experimental Investigation ◽  
Free Stream ◽  
Turbulence Level ◽  
Swept Wing ◽  
Free Stream Turbulence

Heat Transfer Committee and Turbomachinery Committee Best Paper of 1996 Award: The Path to Predicting Bypass Transition

1997 ◽  
Vol 119 (3) ◽  
pp. 405-411 ◽  
Author(s):  
R. E. Mayle ◽  
A. Schulz
Keyword(s):  
Boundary Layer ◽  
Kinetic Energy ◽  
Energy Equation ◽  
Free Stream ◽  
Bypass Transition ◽  
Turbulence Level ◽  
Free Stream Turbulence ◽  
Energy Profiles ◽  
Computer Codes ◽  
Good Agreement

A theory is presented for calculating the fluctuations in a laminar boundary layer when the free stream is turbulent. The kinetic energy equation for these fluctuations is derived and a new mechanism is revealed for their production. A methodology is presented for solving the equation using standard boundary layer computer codes. Solutions of the equation show that the fluctuations grow at first almost linearly with distance and then more slowly as viscous dissipation becomes important. Comparisons of calculated growth rates and kinetic energy profiles with data show good agreement. In addition, a hypothesis is advanced for the effective forcing frequency and free-stream turbulence level that produce these fluctuations. Finally, a method to calculate the onset of transition is examined and the results compared to data.

The Path to Predicting Bypass Transition

1996 ◽  
Author(s):  
R. E. Mayle ◽  
A. Schulz
Keyword(s):  
Boundary Layer ◽  
Kinetic Energy ◽  
Energy Equation ◽  
Free Stream ◽  
Bypass Transition ◽  
Turbulence Level ◽  
Free Stream Turbulence ◽  
Energy Profiles ◽  
Computer Codes ◽  
Good Agreement

A theory is presented for calculating the fluctuations in a laminar boundary layer when the free stream is turbulent. The kinetic energy equation for these fluctuations is derived and a new mechanism is revealed for their production. A methodology is presented for solving the equation using standard boundary layer computer codes. Solutions of the equation show that the fluctuations grow at first almost linearly with distance and then more slowly as viscous dissipation becomes important. Comparisons of calculated growth rates and kinetic energy profiles with data show good agreement. In addition, a hypothesis is advanced for the effective forcing frequency and free-stream turbulence level which produce these fluctuations. Finally, a method to calculate the onset of transition is examined and the results compared to data.

scholarly journals A Theory for Predicting the Turbulent-Spot Production Rate

1998 ◽  
Author(s):  
R. E. Mayle
Keyword(s):  
Boundary Layer ◽  
Production Rate ◽  
Free Stream ◽  
Length Scale ◽  
Bypass Transition ◽  
Turbulence Level ◽  
Turbulent Spot ◽  
Boundary Layer Flows ◽  
Free Stream Turbulence ◽  
New Correlation

A theory is presented for predicting the production rate of turbulent spots. The theory, based on that by Mayle-Schulz for bypass transition, leads to a new correlation for the spot production rate in boundary layer flows with a zero pressure gradient. The correlation, which agrees reasonably well with data, clearly shows the effects of both free-stream turbulence level and length scale. In addition, the theory provides an estimate for the lowest level of free-stream turbulence causing bypass transition.

Experimental Investigation of Free Stream Turbulence Effects on Flow Separation

2003 ◽  
Author(s):  
Mahmoud Ardebili ◽  
Yiannis Andreopoulos
Keyword(s):  
Boundary Layer ◽  
Experimental Investigation ◽  
Reynolds Number ◽  
Pressure Gradient ◽  
Flow Separation ◽  
Large Scale ◽  
Free Stream ◽  
Pressure Coefficient ◽  
Free Stream Turbulence ◽  
Vorticity Flux

An experimental investigation of a separated boundary layer flow has been attempted which has been created by perturbing a flat plate flow with a favorable pressure gradient immediately followed by an adverse pressure gradient. The aim of the research program is possible control of flow separation by means of free stream turbulence. The flow is configured in a large-scale low speed wind tunnel where measurements of turbulence can be obtained with high spatial and temporal resolution. A model has been designed by using CFD analysis. Mean wall pressure and vorticity flux measurements are reported in this paper. Twelve experiments with three different mesh size grids at three different Reynolds numbers have been carried out. Three bulk flow parameters seem to characterize the flow: The Reynolds number of the boundary layer, Re+, the Reynolds number of the flow through the grid, ReM, and the solidity of the grid. It was found that the pressure coefficient depends weakly on the solidity of the grids. Vorticity flux also depends on the grid used to generate free stream turbulence. The location of maximum or minimum vorticity flux moves upstream at higher ReM.

A Theory for Predicting the Turbulent-Spot Production Rate

1999 ◽  
Vol 121 (3) ◽  
pp. 588-593 ◽  
Author(s):  
R. E. Mayle
Keyword(s):  
Boundary Layer ◽  
Production Rate ◽  
Free Stream ◽  
Length Scale ◽  
Bypass Transition ◽  
Turbulence Level ◽  
Turbulent Spot ◽  
Boundary Layer Flows ◽  
Free Stream Turbulence ◽  
New Correlation

A theory is presented for predicting the production rate of turbulent spots. The theory, based on that by Mayle–Schulz for bypass transition, leads to a new correlation for the spot production rate in boundary layer flows with a zero pressure gradient. The correlation, which agrees reasonably well with data, clearly shows the effects of both free-stream turbulence level and length scale. In addition, the theory provides an estimate for the lowest level of free-stream turbulence causing bypass transition.

scholarly journals Free-Stream Turbulence Induced Boundary-Layer Transition in Low-Pressure Turbines

2020 ◽  
Author(s):  
Kristina Ðurović ◽  
Luca De Vincentiis ◽  
Daniele Simoni ◽  
Davide Lengani ◽  
Jan Pralits ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Free Stream ◽  
Random Phase ◽  
Suction Side ◽  
Low Pressure ◽  
Boundary Layer Transition ◽  
Bypass Transition ◽  
Turbulence Level ◽  
Vortical Structures ◽  
Free Stream Turbulence

Abstract The aerodynamic efficiency of turbomachinery blades is profoundly affected by the occurrence of laminar-turbulent transition in the boundary layer since skin friction and losses rise for the turbulent state. Depending on the free-stream turbulence level, we can identify different paths towards a turbulent state. The present study uses direct numerical simulation as the primary tool to investigate the flow behaviour of the low-pressure turbine blade. The computational set-up was designed to follow the experiments by Lengani & Simoni [1]. In the simulations, the flow past only one blade is computed, with periodic boundary conditions in the cross-flow directions to account for the cascade. Isotropic homogeneous free-stream turbulence is prescribed at the inlet. The free-stream turbulence is prescribed as a superposition of Fourier modes with a random phase shift. Two levels of the free-stream turbulence intensity were simulated (Tu = 0.19% and 5.2%), with the integral length scale being 0.167c, at the leading edge. We observed that in case of low free-stream turbulence on the suction side, the Kelvin–Helmholz instability dominated the transition process and full-span vortices were shed from the separation bubble. Transition on the suction side proceeded more rapidly in the high-turbulence case, where streaks broke down into turbulent spots and caused bypass transition. On the pressure side, we have identified the appearance of longitudinal vortical structures, where increasing the turbulence level gives rise to more longitudinal structures. We note that these vortical structures are not produced by Görtler instability.

scholarly journals Transition in an infinite swept-wing boundary layer subject to surface roughness and free-stream turbulence

2021 ◽  
Vol 931 ◽  
Author(s):  
Luca De Vincentiis ◽  
Dan S. Henningson ◽  
Ardeshir Hanifi
Keyword(s):  
Boundary Layer ◽  
Free Stream ◽  
Flow Instability ◽  
Transition To Turbulence ◽  
Computational Domain ◽  
Swept Wing ◽  
Free Stream Turbulence ◽  
Roughness Elements ◽  
Layer Flow ◽  
Institute Of Technology

The instability of an incompressible boundary-layer flow over an infinite swept wing in the presence of disc-type roughness elements and free-stream turbulence (FST) has been investigated by means of direct numerical simulations. Our study corresponds to the experiments by Örlü et al. (Tech. Rep., KTH Royal Institute of Technology, 2021, http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-291874). Here, different dimensions of the roughness elements and levels of FST have been considered. The aim of the present work is to investigate the experimentally observed sensitivity of the transition to the FST intensity. In the absence of FST, flow behind the roughness elements with a height above a certain value immediately undergoes transition to turbulence. Impulse–response analyses of the steady flow have been performed to identify the mechanism behind the observed flow instability. For subcritical roughness, the generated wave packet experiences a weak transient growth behind the roughness and then its amplitude decays as it is advected out of the computational domain. In the supercritical case, in which the flow transitions to turbulence, flow as expected exhibits an absolute instability. The presence of FST is found to have a significant impact on the transition behind the roughness, in particular in the case of a subcritical roughness height. For a height corresponding to a roughness Reynolds number $Re_{hh}=461$ , in the absence of FST the flow reaches a steady laminar state, while a very low FST intensity of $Tu =0.03\,\%$ causes the appearance of turbulence spots in the wake of the roughness. These randomly generated spots are advected out of the computational domain. For a higher FST level of $Tu=0.3\,\%$ , a turbulent wake is clearly visible behind the element, similar to that for the globally unstable case. The presented results confirm the experimental observations and explain the mechanisms behind the observed laminar–turbulent transition and its sensitivity to FST.

Characteristics of a turbulent boundary layer with an external turbulent uniform shear flow

1976 ◽  
Vol 77 (2) ◽  
pp. 369-396 ◽  
Author(s):  
Q. A. Ahmad ◽  
R. E. Luxton ◽  
R. A. Antonia
Keyword(s):  
Boundary Layer ◽  
Shear Stress ◽  
Shear Flow ◽  
Free Stream ◽  
Reynolds Shear Stress ◽  
Wall Layer ◽  
Turbulence Level ◽  
Mean Velocity ◽  
Free Stream Turbulence ◽  
The Mean

Measurements are presented of both mean and fluctuating velocity components in a turbulent boundary layer subjected to a nearly homogeneous external turbulent shear flow. The Reynolds shear stress in the external shear flow is small compared with the wall shear stress. Its transverse mean velocity gradient λ (≃ 6 s−l) is also small compared with typical gradients based on outer variables (say Uw/δ, where Uwis the value of the linear velocity profile extrapolated to the wall and δ is the boundary-layer thickness), but is of the same order as Ut/δ (Ur is the friction velocity). The influence of both positive and negative transverse velocity gradients on the turbulent wall layer is investigated over a streamwise region where the normal Reynolds stresses in the external flow are approximately equal and constant in the streamwise direction. In this region, the integral length scale of the external flow is of the same order of magnitude as that of the wall layer. Measurements in the boundary layer are also given for an un-sheared external turbulent flow (λ = 0) with a turbulence level Tu of 1.5%, approximately the same as that for h = ± 6 s−1. (Tu, is defined as the ratio of the r.m.s. longitudinal velocity fluctuation to Uw.) The measurements are in good agreement with those available in the literature for a similar free-stream turbulence level and show that the external turbulence level and length scale exert a large influence on the turbulence structure in the boundary layer. The additional effect of the external shear on the mean velocity and turbulent energy budget distributions in the inner region of the boundary layer is found to be small. In the outer region, the ‘wake’ component of the mean velocity defect is lowered by the presence of free-stream turbulence and one extra effect due to the external shear is an increase in the Reynolds shear stress when h is positive and a decrease when h is negative. Another interesting effect due to the shear is the appearance near the edge of the layer of a small but distinct region where the local mean velocity is constant and the Reynolds shear stress is negligible.

scholarly journals An Extended Version of an Algebraic Intermittency Model for Prediction of Separation-Induced Transition at Elevated Free-Stream Turbulence Level

2020 ◽  
Vol 5 (4) ◽  
pp. 28
Author(s):  
Slawomir Kubacki ◽  
Daniele Simoni ◽  
Davide Lengani ◽  
Erik Dick
Keyword(s):  
Boundary Layer ◽  
Pressure Gradient ◽  
Free Stream ◽  
Adverse Pressure Gradient ◽  
Bypass Transition ◽  
Turbulence Level ◽  
Boundary Layer Flows ◽  
Free Stream Turbulence ◽  
Eddy Simulation ◽  
Layer Flow

An algebraic intermittency model for boundary layer flow transition from laminar to turbulent state, is extended using an experimental data base on boundary layer flows with various transition types and results by large eddy simulation of transition in a separated boundary layer. The originating algebraic transition model functions well for bypass transition in an attached boundary layer under a moderately high or elevated free-stream turbulence level, and for transition by Kelvin–Helmholtz instability in a separated boundary layer under a low free-stream turbulence level. It also functions well for transition in a separated layer, caused by a very strong adverse pressure gradient under a moderately high or elevated free-stream turbulence level. It is not accurate for transition in a separated layer under a moderately strong adverse pressure gradient, in the presence of a moderately high or elevated free-stream turbulence level. The extension repairs this deficiency. Therefore, a sensor function for detection of the front part of a separated boundary layer activates two terms that express the effect of free-stream turbulence on the breakdown of a separated layer, without changing the functioning of the model in other flow regions. The sensor and the breakdown terms use only local variables.

Sign in / Sign up

Export Citation Format

Share Document