Large-eddy simulations of cyclone separator based on the Lattice-Boltzmann method

2021 ◽  
Author(s):  
Satyanand Pandey ◽  
Lakhbir Singh Brar
Keyword(s):  
Lattice Boltzmann Method ◽  
Lattice Boltzmann ◽  
Large Eddy Simulations ◽  
Cyclone Separator ◽  
Large Eddy ◽  
Boltzmann Method

Corner Stall Prediction in a Compressor Linear Cascade Using Very Large Eddy Simulation Lattice-Boltzmann Method

2020 ◽  
Vol 142 (7) ◽  
Author(s):  
Antoine Maros ◽  
Benoît Bonnal ◽  
Ignacio Gonzalez-Martino ◽  
James Kopriva ◽  
Francesco Polidoro
Keyword(s):  
Lattice Boltzmann Method ◽  
Lattice Boltzmann ◽  
Computational Cost ◽  
Large Eddy Simulations ◽  
Navier Stokes ◽  
Compressor Cascade ◽  
Numerical Work ◽  
Large Eddy ◽  
Boltzmann Method ◽  
Linear Compressor Cascade

Abstract Compressor corner stall is a phenomenon difficult to predict with numerical tools but essential to the design of axial compressors. Predictive methods are beneficial early in the design process to understand design and off-design limitations. Prior numerical work using Navier–Stokes computational methods has assessed the prediction capability for corner stall. Reynolds-averaged Navier–Stokes (RANS) simulations using several turbulence models have shown to over-predict the region of corner hub stall where large eddy simulations (LES) and detached eddy simulations (DES) approaches improved the airfoil surface and wake pressure loss prediction. A linear compressor cascade designed and tested at Ecole Centrale de Lyon provides a good benchmark for the evaluation of the accuracy of numerical methods for corner stall. This paper presents results obtained with Lattice-Boltzmann method (LBM) coupled with very large-eddy simulations (VLES) approach of PowerFLOW and compares them with the experimental and numerical work from Ecole Centrale de Lyon. The ability to achieve equivalent accuracy at a lower computational cost compared to LES scale resolving methods can enable multi-stage design and off-design compressor predictions. A methodical approach is taken by first accurately simulating the upstream flow conditions. Geometric trips are modeled upstream on the endwalls to match both the mean and fluctuating inflow boundary layer conditions. These conditions were then applied to the simulation of the linear compressor cascade. The benchline experimental study includes trips on both the pressure and suction of the airfoil. These trips are also included for the current simulation. The significance of capturing both inflow conditions and including trips on the airfoil is assessed. Detailed comparisons are then made to airfoil loading and downstream losses between experiment and previous RANS and LES simulations. LBM-VLES corner stall results of pitchwise averaged total pressure match LES agreement relative to experimental data at 50 times lower computational cost.

Corner Stall Prediction in a Compressor Linear Cascade Using Very Large Eddy Simulation (VLES) Lattice-Boltzmann Method

2019 ◽  
Author(s):  
Antoine Maros ◽  
Benoît Bonnal ◽  
Ignacio Gonzalez-Martino ◽  
James Kopriva ◽  
Francesco Polidoro
Keyword(s):  
Lattice Boltzmann Method ◽  
Lattice Boltzmann ◽  
Computational Cost ◽  
Large Eddy Simulations ◽  
Navier Stokes ◽  
Compressor Cascade ◽  
Numerical Work ◽  
Large Eddy ◽  
Boltzmann Method ◽  
Linear Compressor Cascade

Abstract Compressor corner stall is a phenomenon difficult to predict with numerical tools but essential to the design of axial compressors. Predictive methods are beneficial early in the design process to understand design and off-design limitations. Prior numerical work using Navier-Stokes computational methods have assessed the prediction capability for corner stall. Reynolds Averaged Navier-Stokes (RANS) simulations using several turbulence models [1] have shown to over-predict the region of corner hub stall where Large Eddy Simulations (LES) and Detached Eddy Simulations (DES) approaches improved the airfoil surface and wake pressure loss prediction [2, 3]. A linear compressor cascade designed and tested at Ecole Centrale de Lyon [3,4] provides a good benchmark for the evaluation of the accuracy of numerical methods for corner stall. This paper presents results obtained with Lattice-Boltzmann Method (LBM) coupled with Very Large-Eddy Simulations (VLES) approach of PowerFLOW and compares them with the experimental and numerical work from Ecole Centrale de Lyon. The ability to achieve equivalent accuracy at a lower computational cost compared to LES scale resolving methods can enable multi-stage design and off-design compressor predictions. A methodical approach is taken by first accurately simulating the upstream flow conditions. Geometric trips are modeled upstream on the endwalls to match both the mean and fluctuating inflow boundary layer conditions. These conditions were then applied to the simulation of the linear compressor cascade. The benchline experimental study includes trips on both the pressure and suction of the airfoil. These trips are also included for the current simulation. The significance of capturing both inflow conditions and including trips on the airfoil are assessed. Detailed comparisons are then made to airfoil loading and downstream losses between experiment and previous RANS and LES simulations. LBM-VLES corner stall results of pitchwise averaged total pressure match LES agreement relative to experimental data at 50 times lower computational cost.

Large Eddy Simulations of a Stirred Tank Using the Lattice Boltzmann Method on a Nonuniform Grid

2002 ◽  
Vol 181 (2) ◽  
pp. 675-704 ◽  
Author(s):  
Zhenyu Lu ◽  
Ying Liao ◽  
Dongying Qian ◽  
J.B. McLaughlin ◽  
J.J. Derksen ◽  
...  
Keyword(s):  
Lattice Boltzmann Method ◽  
Lattice Boltzmann ◽  
Large Eddy Simulations ◽  
Stirred Tank ◽  
Nonuniform Grid ◽  
Large Eddy ◽  
Boltzmann Method
Sign in / Sign up

Export Citation Format

Share Document