Direct confirmation of the dopant site in indium-doped SrTiO3 photocatalyst via atomic-scale analytical transmission electron microscopy imaging

2021 ◽  
Vol 118 (15) ◽  
pp. 153901
Author(s):  
Mitsunori Kitta ◽  
Noboru Taguchi ◽  
Hanggara Sudrajat ◽  
Hiroshi Onishi
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Atomic Scale ◽  
Analytical Transmission Electron Microscopy ◽  
Microscopy Imaging ◽  
Transmission Electron ◽  
Direct Confirmation

Characterization of submicrometer fluid Inclusions in minerals by Analytical/Transmission Electron Microscopy and electron diffraction

1990 ◽  
Vol 48 (4) ◽  
pp. 424-424
Author(s):  
George Guthrie ◽  
David Veblen
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Electron Microscope ◽  
Electron Diffraction ◽  
Light Microscopy ◽  
Fluid Inclusions ◽  
Energy Dispersive Spectrometer ◽  
Analytical Transmission Electron Microscopy ◽  
Transmission Electron

The nature of a geologic fluid can often be inferred from fluid-filled cavities (generally <100 μm in size) that are trapped during the growth of a mineral. A variety of techniques enables the fluids and daughter crystals (any solid precipitated from the trapped fluid) to be identified from cavities greater than a few micrometers. Many minerals, however, contain fluid inclusions smaller than a micrometer. Though inclusions this small are difficult or impossible to study by conventional techniques, they are ideally suited for study by analytical/ transmission electron microscopy (A/TEM) and electron diffraction. We have used this technique to study fluid inclusions and daughter crystals in diamond and feldspar.Inclusion-rich samples of diamond and feldspar were ion-thinned to electron transparency and examined with a Philips 420T electron microscope (120 keV) equipped with an EDAX beryllium-windowed energy dispersive spectrometer. Thin edges of the sample were perforated in areas that appeared in light microscopy to be populated densely with inclusions. In a few cases, the perforations were bound polygonal sides to which crystals (structurally and compositionally different from the host mineral) were attached (Figure 1).

scholarly journals Fabrication of a liquid cell for in situ transmission electron microscopy

Microscopy ◽  
2020 ◽  
Author(s):  
Xiaoguang Li ◽  
Kazutaka Mitsuishi ◽  
Masaki Takeguchi
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Cost Effective ◽  
Production Method ◽  
Microscopy Imaging ◽  
Transmission Electron ◽  
In Situ Electron Microscopy ◽  
Liquid Cell ◽  
Si Wafer

Abstract Liquid cell transmission electron microscopy (LCTEM) enables imaging of dynamic processes in liquid with high spatial and temporal resolution. The widely used liquid cell (LC) consists of two stacking microchips with a thin wet sample sandwiched between them. The vertically overlapped electron-transparent membrane windows on the microchips provide passage for the electron beam. However, microchips with imprecise dimensions usually cause poor alignment of the windows and difficulty in acquiring high-quality images. In this study, we developed a new and efficient microchip fabrication process for LCTEM with a large viewing area (180 µm × 40 µm) and evaluated the resultant LC. The new positioning reference marks on the surface of the Si wafer dramatically improve the precision of dicing the wafer, making it possible to accurately align the windows on two stacking microchips. The precise alignment led to a liquid thickness of 125.6 nm close to the edge of the viewing area. The performance of our LC was demonstrated by in situ transmission electron microscopy imaging of the dynamic motions of 2-nm Pt particles. This versatile and cost-effective microchip production method can be used to fabricate other types of microchips for in situ electron microscopy.

scholarly journals Annular Bright Field Scanning Transmission Electron Microscopy Imaging Dynamics

2010 ◽  
Vol 16 (S2) ◽  
pp. 80-81 ◽  
Author(s):  
SD Findlay ◽  
N Shibata ◽  
H Sawada ◽  
E Okunishi ◽  
Y Kondo ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Scanning Transmission Electron Microscopy ◽  
Bright Field ◽  
Microscopy Imaging ◽  
Scanning Transmission Electron ◽  
Transmission Electron ◽  
Scanning Transmission

Extended abstract of a paper presented at Microscopy and Microanalysis 2010 in Portland, Oregon, USA, August 1 – August 5, 2010.

Atomic-scale structural and compositional analyses of Ruddlesden-Popper planar faults in AO-excess SrTiO3 (A = Sr2+, Ca2+, Ba2+) ceramics

2009 ◽  
Vol 24 (8) ◽  
pp. 2596-2604 ◽  
Author(s):  
Sašo Šturm ◽  
Makoto Shiojiri ◽  
Miran Čeh
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Dark Field ◽  
Atomic Scale ◽  
Transmission Electron ◽  
Initial Stage ◽  
Final Microstructure ◽  
Scanning Transmission ◽  
The Matrix ◽  
Annular Dark Field

The microstructure in AO-excess SrTiO3 (A = Sr2+, Ca2+, Ba2+) ceramics is strongly affected by the formation of Ruddlesden-Popper fault–rich (RP fault) lamellae, which are coherently intergrown with the matrix of the perovskite grains. We studied the structure and chemistry of RP faults by applying quantitative high-resolution transmission electron microscopy and high-angle annular dark-field scanning transmission electron microscopy analyses. We showed that the Sr2+ and Ca2+ dopant ions form RP faults during the initial stage of sintering. The final microstructure showed preferentially grown RP fault lamellae embedded in the central part of the anisotropic perovskite grains. In contrast, the dopant Ba2+ ions preferably substituted for Sr2+ in the SrTiO3 matrix by forming a BaxSr1−xTiO3 solid solution. The surplus of Sr2+ ions was compensated structurally in the later stages of sintering by the formation of SrO-rich RP faults. The resulting microstructure showed RP fault lamellae located at the surface of equiaxed BaxSr1-xTiO3 perovskite grains.

Sign in / Sign up

Export Citation Format

Share Document