scholarly journals Effective strain manipulation of the antiferromagnetic state of polycrystalline NiO

2021 ◽  
Vol 118 (17) ◽  
pp. 172408
Author(s):  
A. Barra ◽  
A. Ross ◽  
O. Gomonay ◽  
L. Baldrati ◽  
A. Chavez ◽  
...  
Keyword(s):  
Effective Strain ◽  
Antiferromagnetic State

Redrawing Operation a Star Shape from Cylindrical Shape Using Experimental and FE Analysis

2020 ◽  
Vol 38 (1A) ◽  
pp. 25-32
Author(s):  
Waleed Kh. Jawad ◽  
Ali T. Ikal
Keyword(s):  
Finite Element ◽  
Effective Strain ◽  
Element Model ◽  
Cylindrical Shape ◽  
Element Analysis ◽  
Punch Force ◽  
Maximum Value ◽  
Element Simulation ◽  
Blank Sheet ◽  
The Finite Element Model

The aim of this paper is to design and fabricate a star die and a cylindrical die to produce a star shape by redrawing the cylindrical shape and comparing it to the conventional method of producing a star cup drawn from the circular blank sheet using experimental (EXP) and finite element simulation (FES). The redrawing and drawing process was done to produce a star cup with the dimension of (41.5 × 34.69mm), and (30 mm). The finite element model is performed via mechanical APDL ANSYS18.0 to modulate the redrawing and drawing operation. The results of finite element analysis were compared with the experimental results and it is found that the maximum punch force (39.12KN) recorded with the production of a star shape drawn from the circular blank sheet when comparing the punch force (32.33 KN) recorded when redrawing the cylindrical shape into a star shape. This is due to the exposure of the cup produced drawn from the blank to the highest tensile stress. The highest value of the effective stress (709MPa) and effective strain (0.751) recorded with the star shape drawn from a circular blank sheet. The maximum value of lamination (8.707%) is recorded at the cup curling (the concave area) with the first method compared to the maximum value of lamination (5.822%) recorded at the cup curling (the concave area) with the second method because of this exposure to the highest concentration of stresses. The best distribution of thickness, strains, and stresses when producing a star shape by

scholarly journals 3D-FEM Simulation of Hot Rolling Process and Characterization of the Resultant Microstructure of a Light-Weight Mn Steel

Crystals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 569
Author(s):  
Ana Claudia González-Castillo ◽  
José de Jesús Cruz-Rivera ◽  
Mitsuo Osvaldo Ramos-Azpeitia ◽  
Pedro Garnica-González ◽  
Carlos Gamaliel Garay-Reyes ◽  
...  
Keyword(s):  
Hot Rolling ◽  
Thermomechanical Processing ◽  
Computational Simulation ◽  
Effective Strain ◽  
Fem Simulation ◽  
Rolling Process ◽  
3D Fem ◽  
Hot Rolling Process ◽  
Mn Steel

Computational simulation has become more important in the design of thermomechanical processing since it allows the optimization of associated parameters such as temperature, stresses, strains and phase transformations. This work presents the results of the three-dimensional Finite Element Method (FEM) simulation of the hot rolling process of a medium Mn steel using DEFORM-3D software. Temperature and effective strain distribution in the surface and center of the sheet were analyzed for different rolling passes; also the change in damage factor was evaluated. According to the hot rolling simulation results, experimental hot rolling parameters were established in order to obtain the desired microstructure avoiding the presence of ferrite precipitation during the process. The microstructural characterization of the hot rolled steel was carried out using optical microscopy (OM), scanning electron microscopy (SEM) and X-ray diffraction (XRD). It was found that the phases present in the steel after hot rolling are austenite and α′-martensite. Additionally, to understand the mechanical behavior, tensile tests were performed and concluded that this new steel can be catalogued in the third automotive generation.

scholarly journals The impact of drilling and slitting construction on damage field: evolution characteristics in low-permeability coal seam

2021 ◽  
Vol 37 ◽  
pp. 205-215
Author(s):  
Heng Chen ◽  
Hongmei Cheng ◽  
Aibin Xu ◽  
Yi Xue ◽  
Weihong Peng
Keyword(s):  
Finite Element ◽  
Rock Mass ◽  
Damage Mechanics ◽  
Effective Strain ◽  
Secondary Development ◽  
Distribution Area ◽  
Finite Element Program ◽  
Element Program ◽  
Mining Face ◽  
The Impact

ABSTRACT The fracture field of coal and rock mass is the main channel for gas migration and accumulation. Exploring the evolution law of fracture field of coal and rock mass under the condition of drilling and slitting construction has important theoretical significance for guiding efficient gas drainage. The generation and evolution process of coal and rock fissures is also the development and accumulation process of its damage. Therefore, based on damage mechanics and finite element theory, the mathematical model is established. The damage variable of coal mass is defined by effective strain, the elastoplastic damage constitutive equation is established and the secondary development of finite element program is completed by FORTRAN language. Using this program, the numerical simulation of drilling and slitting construction of the 15-14120 mining face of Pingdingshan No. 8 Mine is carried out, and the effects of different single borehole diameters, different kerf widths and different kerf heights on the distribution area of surrounding coal fracture field and the degree of damage are studied quantitatively. These provide a theoretical basis for the reasonable determination of the slitting and drilling arrangement parameters at the engineering site.

Bending and Twisting of Pipes With Strain Hardening

1984 ◽  
Vol 106 (2) ◽  
pp. 188-195 ◽  
Author(s):  
J. H. Lau ◽  
T. T. Lau
Keyword(s):  
Effective Strain ◽  
Closed Form Solution ◽  
Bending Moment ◽  
Small Deformation ◽  
Form Solution ◽  
Simultaneous Action ◽  
Deformation Analysis ◽  
Engineering Practice ◽  
Strain Diagram ◽  
Interaction Curves

A closed-form solution is presented for the small deformation analysis of a straight thin-walled circular cylinder subjected to the simultaneous action of bending and twisting moments. Dimensionless interaction curves and charts which relate the variables, bending moment, curvature, maximum effective strain, twisting moment, and shear strain are also provided for engineering practice convenience. The average stress-strain diagram of the cylinder is described by two straight lines. The result presented herein is not only a good approximation of a wide class of piping materials, but also provides a standard tool for estimating the accuracy of different direct schemes such as numerical integration, finite-difference, and finite-element methods.

Effect of Thickness on Mechanically Tunable Magnetic Anisotropy of FeGa Thin Films Deposited on Flexible Substrates

2015 ◽  
Vol 815 ◽  
pp. 227-232 ◽  
Author(s):  
Ying Yu ◽  
Shu Hong Xie ◽  
Qing Feng Zhan
Keyword(s):  
Thin Films ◽  
Magnetic Properties ◽  
Magnetic Anisotropy ◽  
Effective Strain ◽  
Anisotropy Field ◽  
Saturation Field ◽  
Effective Anisotropy ◽  
Magnetostriction Constant ◽  
The Difference ◽  
Different Strains

A practical way to manipulate the magnetic anisotropy of magnetostrictive FeGa thin films grown on flexible polyethylene terephthalate (PET) substrates is introduced in this study. The effect of film thickness on magnetic properties and magnetostriction constant of polycrystalline FeGa thin films was investigated. The anisotropy field Hk of flexible FeGa films, i.e., the saturation field determined by fitting the hysteresis curves measured along the hard axis, was enhanced with increasing the tensile strain applied along the easy axis of the thin films, but this enhancement via strain became unconspicuous with increasing the thickness of FeGa films. In order to study the magnetic sensitivity of thin films responding to the external stress, we applied different strains on these films and measure the corresponding anisotropy field. Moreover, the effective magnetostriction constant of FeGa films was calculated from the changes of both anisotropy field and external strain based on the Villari effect. A Neel’s phenomenological model was developed to illustrate that the effective anisotropy field of FeGa thin films was contributed from both the constant volume term and the inverse thickness dependent surface term. Therefore, the magnetic properties for the volume and surface of FeGa thin films were different, which has been verified in this work by using vibrating sample magnetometer (VSM) and magneto-optic Kerr effect (MOKE) system. The anisotropy field contributed by the surface of FeGa film and obtained by MOKE is smaller than that contributed by the film volume and measured by VSM. We ascribed the difference in Hk to the relaxation of the effective strain applied on the films with increasing the thickness of films.

Influence of the Deformation Method on the Microstructure Changes in AZ31 Magnesium Alloy Round Rods Obtained by the Rolling Process

2016 ◽  
Vol 716 ◽  
pp. 864-870
Author(s):  
Andrzej Stefanik ◽  
Piotr Szota ◽  
Sebastian Mróz ◽  
Teresa Bajor ◽  
Sonia Boczkal
Keyword(s):  
Magnesium Alloy ◽  
Numerical Modelling ◽  
Rolling Mill ◽  
Laboratory Tests ◽  
Effective Strain ◽  
Rolling Process ◽  
Az31 Magnesium Alloy ◽  
Deformation Method ◽  
Microstructure Changes ◽  
Skew Rolling

This paper presents the research results of the microstructure changes of the round rods of AZ31 magnesium alloy in the hot rolling processes. The rolling was conducted in duo mill and a three-high skew rolling mill. Numerical modelling of the AZ31 magnesium alloy round rods rolling process was conducted using a computer program Forge 2011®. The verification of the results of numerical modelling was carried out during laboratory tests in a two-high rolling mill D150 and a three-high skew rolling mill RSP 40/14. Distributions of the total effective strain and temperature during AZ31 rods rolling process were determined on the basis of the theoretical analysis. Microstructure and texture changes during both analysed processes were studied.

Sign in / Sign up

Export Citation Format

Share Document