scholarly journals The impact of bacteria exposure on the plasmonic response of silver nanostructured surfaces

2021 ◽  
Vol 2 (2) ◽  
pp. 021401
Author(s):  
Giuseppe M. Paternò ◽  
Aaron M. Ross ◽  
Silvia M. Pietralunga ◽  
Simone Normani ◽  
Nicholas Dalla Vedova ◽  
...  
2014 ◽  
Vol 136 (12) ◽  
Author(s):  
Hector Mendoza ◽  
Sara Beaini ◽  
Van P. Carey

Experimental studies of dropwise condensation have generally indicated that higher heat transfer coefficients correspond to smaller mean sizes for droplets growing through condensation on the surface. Recent investigations of dropwise condensation on nanostructured surfaces suggest that optimizing the design of such surfaces can push mean droplet sizes down to smaller values and significantly enhance heat transfer. This paper summarizes a theoretical exploration of the limits of heat transfer enhancement that can be achieved by pushing mean droplet size to progressively smaller sizes. A model analysis is developed that predicts transport near clusters of water droplets undergoing dropwise condensation. The model accounts for interfacial tension effects on thermodynamic equilibrium and noncontinuum transport effects, which become increasingly important as droplet size becomes progressively smaller. In this investigation, the variation of condensing heat transfer coefficient for droplet clusters of different sizes was explored for droplet diameters ranging from hundreds of microns to tens of nanometers. The model predictions indicate that the larger droplet transport trend of increasing heat transfer coefficient with decreasing mean droplet size breaks down as droplet size becomes smaller. The model further predicts that as drop size becomes smaller, a peak heat transfer coefficient is reached, beyond which the coefficient drops as the size continues to diminish. This maximum heat transfer coefficient results from the increasing importance of surface tension effects and noncontinuum effects as droplet size becomes smaller. The impact of these predictions on the interpretation of dropwise condensation heat transfer data, and the implications for design of nanostructured surfaces to enhance dropwise condensation are discussed in detail.


2014 ◽  
Vol 1061-1062 ◽  
pp. 575-578
Author(s):  
Ge Qin ◽  
Hao Xue Li ◽  
Meng Die Ma ◽  
Juan Juan Li ◽  
Ya Fei Deng

This paper studied the growth morphology of the cells on the nanostructured surfaces of the bio-electrodes implanted in human patients. A transition model of the cells on those surfaces, which is the W model or C-B model, was deduced according to the effect of the microstructures on the wetting characteristics and the solid-liquid contact angle models of the microstructured surface. According to the contact angle formula of the model of the droplet on the solid surface, the formula was derived to describe the morphology of the ells on the nanostructured surface. The results of the experiments showed the impact of nanostructured to the morphology of the cells. The changes of the cell morphology on the smooth surface and the nanostructured surface showed that the cell morphology was affected by the nanostructures of solid surface, and the growth shape of cell was different when the sizes were different.


2018 ◽  
Vol 140 (10) ◽  
Author(s):  
Ablimit Aili ◽  
QiaoYu Ge ◽  
TieJun Zhang

Micro/nanostructured surfaces have been widely explored to enhance condensation heat transfer over the past decades. When there is no flooding, micro/nanostructures can enable dropwise condensation by reducing solid-droplet adhesion. However, micro/nanostructures have mixed effects on filmwise condensation because the structures can simultaneously thin the condensate film and increase the fluid–solid friction. Although oil infusion of structured surfaces has recently been shown to render filmwise condensation dropwise in many cases, challenges remain in the case of extremely low-surface-tension fluids. This work aims to provide a unified experimental platform and study the impact of mini/micro/nanostructures on condensation heat transfer of low-surface-tension fluids in a customized environmental chamber. We first investigate the effect of microstructures, hydrophobic coating, as well as oil infusion on the filmwise condensation of a low-surface-tension fluid, e.g., refrigerant, on microporous aluminum surfaces. And we show that for low-surface-tension condensates, microstructures, hydrophobic coating, or oil infusion do not play a considerable role in enhancing or deteriorating heat transfer. Next, we study how the addition of nanostructures affects the condensation performance of the refrigerant on copper mini-fin structures. It is found that nanostructures slightly deteriorate the condensation performance due to the dominance of solid–liquid friction, although the performance of these mini-fins with nanostructured surfaces is still better than that of the mini-pin-fins. These results provide guidelines of designing mini/micro/nanoscale surface structures for enhanced condensation applications.


Author(s):  
Hector Mendoza ◽  
Sara Beaini ◽  
Van P. Carey

Experimental studies of dropwise condensation have generally indicated that higher heat transfer coefficients correspond to smaller mean sizes for droplets growing through condensation on the surface. Recent investigations of dropwise condensation on nanostructured surfaces suggest that optimizing the design of such surfaces can push mean droplet sizes down to smaller values and significantly enhance heat transfer. This paper summarizes a theoretical exploration of the limits of heat transfer enhancement that can be achieved by pushing mean droplet size to progressively smaller sizes. A model analysis is developed that predicts transport near clusters of water droplets undergoing dropwise condensation. The model accounts for interfacial tension effects on thermodynamic equilibrium and noncontinuum transport effects, which become increasingly important as droplet size becomes progressively smaller. In this investigation, the variation of condensing heat transfer coefficient for droplet clusters of different size was explored for droplet diameters ranging from hundreds of microns to tens of nanometers. The model predictions indicate that the larger droplet transport trend of increasing heat transfer coefficient with decreasing mean droplet size breaks down as droplet size becomes smaller. The model further predicts that as drop size becomes smaller, a peak heat transfer coefficient is reached, beyond which the coefficient drops as the size continues to diminish. This maximum heat transfer coefficient results from the increasing importance of surface tension effects and non-continuum effects as droplet size becomes smaller. The impact of these predictions on the interpretation of dropwise condensation heat transfer data, and the implications for design of nanostructured surfaces to enhance dropwise condensation are discussed in detail.


Nanomedicine ◽  
2020 ◽  
Vol 15 (19) ◽  
pp. 1843-1859
Author(s):  
Barbora Voltrova ◽  
Petra Jarolimova ◽  
Vojtech Hybasek ◽  
Veronika Hefka Blahnova ◽  
Josef Sepitka ◽  
...  

Aim: To evaluate the impact of a nanostructured surface created on β-titanium alloy, Ti-36Nb-6Ta, on the growth and differentiation of human mesenchymal stem cells. Materials & methods: The nanotubes, with average diameters 18, 36 and 46 nm, were prepared by anodic oxidation. Morphology, hydrophilicity and mechanical properties of the nanotube layers were characterized. The biocompatibility and osteogenic potential of the nanostructured surfaces were established using various in vitro assays, scanning electron microscopy and confocal microscopy. Results: The nanotubes lowered elastic modulus close to that of bone, positively influenced cell adhesion, improved ALP activity, synthesis of type I collagen and osteocalcin expression, but diminished early cell proliferation. Conclusion: Nanostructured Ti-36Nb-6Ta with nanotube diameters 36 nm was the most promising material for bone implantation.


Nanomaterials ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1476
Author(s):  
Riccardo Di Santo ◽  
Sabrina Romanò ◽  
Alberto Mazzini ◽  
Svetlana Jovanović ◽  
Giuseppina Nocca ◽  
...  

Exosomes (EXOs) are nano-sized vesicles secreted by most cell types. They are abundant in bio-fluids and harbor specific molecular constituents from their parental cells. Due to these characteristics, EXOs have a great potential in cancer diagnostics for liquid biopsy and personalized medicine. Despite this unique potential, EXOs are not yet widely applied in clinical settings, with two main factors hindering their translational process in diagnostics. Firstly, conventional extraction methods are time-consuming, require large sample volumes and expensive equipment, and often do not provide high-purity samples. Secondly, characterization methods have some limitations, because they are often qualitative, need extensive labeling or complex sampling procedures that can induce artifacts. In this context, novel label-free approaches are rapidly emerging, and are holding potential to revolutionize EXO diagnostics. These methods include the use of nanodevices for EXO purification, and vibrational spectroscopies, scattering, and nanoindentation for characterization. In this progress report, we summarize recent key advances in label-free techniques for EXO purification and characterization. We point out that these methods contribute to reducing costs and processing times, provide complementary information compared to the conventional characterization techniques, and enhance flexibility, thus favoring the discovery of novel and unexplored EXO-based biomarkers. In this process, the impact of nanotechnology is systematically highlighted, showing how the effectiveness of these techniques can be enhanced using nanomaterials, such as plasmonic nanoparticles and nanostructured surfaces, which enable the exploitation of advanced physical phenomena occurring at the nanoscale level.


1962 ◽  
Vol 14 ◽  
pp. 415-418
Author(s):  
K. P. Stanyukovich ◽  
V. A. Bronshten

The phenomena accompanying the impact of large meteorites on the surface of the Moon or of the Earth can be examined on the basis of the theory of explosive phenomena if we assume that, instead of an exploding meteorite moving inside the rock, we have an explosive charge (equivalent in energy), situated at a certain distance under the surface.


1962 ◽  
Vol 14 ◽  
pp. 169-257 ◽  
Author(s):  
J. Green

The term geo-sciences has been used here to include the disciplines geology, geophysics and geochemistry. However, in order to apply geophysics and geochemistry effectively one must begin with a geological model. Therefore, the science of geology should be used as the basis for lunar exploration. From an astronomical point of view, a lunar terrain heavily impacted with meteors appears the more reasonable; although from a geological standpoint, volcanism seems the more probable mechanism. A surface liberally marked with volcanic features has been advocated by such geologists as Bülow, Dana, Suess, von Wolff, Shaler, Spurr, and Kuno. In this paper, both the impact and volcanic hypotheses are considered in the application of the geo-sciences to manned lunar exploration. However, more emphasis is placed on the volcanic, or more correctly the defluidization, hypothesis to account for lunar surface features.


1997 ◽  
Vol 161 ◽  
pp. 197-201 ◽  
Author(s):  
Duncan Steel

AbstractWhilst lithopanspermia depends upon massive impacts occurring at a speed above some limit, the intact delivery of organic chemicals or other volatiles to a planet requires the impact speed to be below some other limit such that a significant fraction of that material escapes destruction. Thus the two opposite ends of the impact speed distributions are the regions of interest in the bioastronomical context, whereas much modelling work on impacts delivers, or makes use of, only the mean speed. Here the probability distributions of impact speeds upon Mars are calculated for (i) the orbital distribution of known asteroids; and (ii) the expected distribution of near-parabolic cometary orbits. It is found that cometary impacts are far more likely to eject rocks from Mars (over 99 percent of the cometary impacts are at speeds above 20 km/sec, but at most 5 percent of the asteroidal impacts); paradoxically, the objects impacting at speeds low enough to make organic/volatile survival possible (the asteroids) are those which are depleted in such species.


1997 ◽  
Vol 161 ◽  
pp. 189-195
Author(s):  
Cesare Guaita ◽  
Roberto Crippa ◽  
Federico Manzini

AbstractA large amount of CO has been detected above many SL9/Jupiter impacts. This gas was never detected before the collision. So, in our opinion, CO was released from a parent compound during the collision. We identify this compound as POM (polyoxymethylene), a formaldehyde (HCHO) polymer that, when suddenly heated, reformes monomeric HCHO. At temperatures higher than 1200°K HCHO cannot exist in molecular form and the most probable result of its decomposition is the formation of CO. At lower temperatures, HCHO can react with NH3 and/or HCN to form high UV-absorbing polymeric material. In our opinion, this kind of material has also to be taken in to account to explain the complex evolution of some SL9 impacts that we observed in CCD images taken with a blue filter.


Sign in / Sign up

Export Citation Format

Share Document