Production of composite coatings based on zirconium dioxide

2020 ◽  
Author(s):  
I. F. Zakirov ◽  
Yu. V. Ivanova ◽  
A. V. Shak
Keyword(s):  
Zirconium Dioxide ◽  
Composite Coatings

scholarly journals Evolution of the phase composition of ZrB2-35MoSi2-15Al composite coating at annealing

2021 ◽  
Vol 2124 (1) ◽  
pp. 012016
Author(s):  
I Goncharov ◽  
M Kovaleva ◽  
M Yapryntsev ◽  
V Sirota
Keyword(s):  
Phase Composition ◽  
Zirconium Dioxide ◽  
Elevated Temperatures ◽  
Silicon Oxide ◽  
Composite Coatings ◽  
Molybdenum Disilicide ◽  
Carbon Composite ◽  
Carbon Composites ◽  
X Ray

Abstract In this article, new composite coatings ZrB2-35MoSi2-15Al were deposited on the surface of a carbon-carbon composite using a multi-chamber detonation accelerator. The evolution of the phase composition of ZrB2-35MoSi2-15Al coatings was analyzed with differential scanning calorimeter (DSC) and X-ray diffractometry (in situ HT-XRD) at temperatures from room temperature (∼ 25°C) to 1400°C (normal atmosphere and pressure). The coating before annealing according to X-ray diffractometry data is tetragonal (t-ZrO2) and monocline (m-ZrO2) zirconium dioxide, monocline silicon oxide (m-SiO2), hexagonal zirconium diboride (h-ZrB2), tetragonal molybdenum disilicide (t-MoSi2), cubic aluminum (c-Al) and cubic yttrium oxide (c-Y2O3). It was found that the coating crystallizes in m-ZrO2 at 460ºC, and then mullite with rhombic crystal lattice appears at 960ºC. When the temperature reaches 1050ºC the m-ZrO2, ZrSiO4, t-ZrO2, m-SiO2 and mullite phases formed in the coating. At 1400 º C, cubic zirconium dioxide appears in the coating. Experimental results can become the basis for the application of ceramic coating ZrB2-35MoSi2-15Al, which can improve the properties of carbon-carbon composites in an oxygen-containing environment at elevated temperatures.

scholarly journals Formation and Investigation of Plasma Powder Coatings Made of Oxide Ceramics Modified with High-Energy Effects

2018 ◽  
Vol 17 (5) ◽  
pp. 378-389 ◽  
Author(s):  
V. A. Okovity ◽  
F. I. Panteleenko ◽  
V. V. Okovity ◽  
V. M. Astashinsky ◽  
V. V. Uglov ◽  
...  
Keyword(s):  
Surface Layer ◽  
Zirconium Dioxide ◽  
Composite Coatings ◽  
High Energy ◽  
Morphological Properties ◽  
Multilayer Composite ◽  
Plasma Flows ◽  
Near Surface ◽  
Compression Plasma Flows ◽  
X Ray

The paper presents results of studying structure and properties of multilayer composite coatings optimized for their composition based on zirconium dioxide materials used for deposition of plasma coatings on the models of elements for anti-meteor shielding screens. The influence of plasma jet parameters (current, distance of sputtering, consumption of plasma-forming nitrogen gas) and fractional composition of an initial powder on characteristics of two-layer composite coatings based on nickel-chromium-aluminum-yttrium and zirconium dioxide on the elements of protective screens has been analyzed in the paper. Optimization has been carried out on the basis of obtaining maximum coefficient of powder utilization. The investigations have made it possible to ascertain specific features of elemental and phase composition, surface morphology, microstructure multilayer composite coatings on the basis of a solid layer of metal oxides and a viscous transition sub-layer subjected to compression plasma flows. The investigations have been executed with the help of scanning electron microscopy, energy dispersive x-ray spectral microanalysis, and x-ray diffraction analysis. It has been shown on the basis of the obtained results that the effect of compression plasma flows on multilayer composite coatings leads to a modification of a near-surface layer with a thickness up to 15 μm that presupposes its melting and subsequent high-speed crystallization which together provide an increase in its density, decrease in porosity while maintaining the initial phase state. Liquid-phase processes in the molten phase of the near-surface layer permit to modify morphological properties of the surface which are associated with its smoothing and lowering of roughness.

Surface Films on Zircaloy-2 Samples Cracked in Neutral Aqueous NaCl by Stress Corrosion

1973 ◽  
Vol 31 ◽  
pp. 46-47
Author(s):  
R.A. Ploc
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Film Thickness ◽  
Stress Corrosion ◽  
Zirconium Dioxide ◽  
Surface Film ◽  
Surface Films ◽  
Continuous Layer ◽  
Transmission Electron ◽  
Product Film

Samples of low-nickel Zircaloy-2 (material MLI-788-see(1)), when anodically polarized in neutral 5 wt% NaCl solutions, were found to be susceptible to pitting and stress corrosion cracking. The SEM revealed that pitting of stressed samples was occurring below a 2000Å thick surface film which behaved differently from normal zirconium dioxide in that it did not display interference colours. Since the initial film thickness was approximately 65Å, attempts were made to examine the product film by transmission electron microscopy to deduce composition and how the corrosion environment could penetrate the continuous layer.

Microwave Absorbing Properties of Carbon Fibers Modified with BN/SiC Composite Coatings

2014 ◽  
Vol 29 (10) ◽  
pp. 1093 ◽  
Author(s):  
ZHOU Wei ◽  
XIAO Peng ◽  
LI Yang ◽  
LUO Heng ◽  
HONG Wen
Keyword(s):  
Carbon Fibers ◽  
Composite Coatings ◽  
Microwave Absorbing Properties ◽  
Microwave Absorbing

Laser cladding Ni-base composite coatings reinforced by in-situ synthesized multiple carbide particles

2008 ◽  
Author(s):  
Ruiquan Kang ◽  
Mingxing Ma ◽  
Wenjin Liu ◽  
Minlin Zhong ◽  
Yide Kan ◽  
...  
Keyword(s):  
Laser Cladding ◽  
Composite Coatings ◽  
Base Composite ◽  
Carbide Particles

Super hard WC-Cr composite coatings: An approach to potential wear applications

2016 ◽  
Vol 58 (10) ◽  
pp. 864-869
Author(s):  
Orkut Sancakoğlu ◽  
Erdal Çelik
Keyword(s):  
Composite Coatings

Evaluation of the Diamond Particle Content in Ni-P Nano-Composite Coatings

2016 ◽  
Vol 53 (3) ◽  
pp. 144-160
Author(s):  
D. Dietrich ◽  
A. Eilert ◽  
D. Nickel ◽  
T. Lampke
Keyword(s):  
Composite Coatings ◽  
Diamond Particle ◽  
Particle Content ◽  
Nano Composite
Sign in / Sign up

Export Citation Format

Share Document