Revealing a metastable cubic phase in CoFe2O4–SrTiO3 three-dimensional network heteroepitaxial nanostructure

2020 ◽  
Vol 128 (22) ◽  
pp. 225303
Author(s):  
Haili Song ◽  
Chao Li ◽  
Chih-Kuo Wang ◽  
Jan-Chi Yang ◽  
Jianjun Lin ◽  
...  
Keyword(s):  
Three Dimensional ◽  
Cubic Phase ◽  
Dimensional Network

Development of Mucoadhesive Buccal Drug Delivery System of Propranolol Hydrochloride Using Aster ericoides Mucilage

2020 ◽  
Vol 10 (2) ◽  
pp. 133-148
Author(s):  
Ankaj Kaundal ◽  
Pravin Kumar ◽  
Rajendra Awasthi ◽  
Giriraj T. Kulkarni
Keyword(s):  
Buccal Cavity ◽  
Three Dimensional ◽  
Hot Water ◽  
Fickian Diffusion ◽  
Aster Ericoides ◽  
Dimensional Network ◽  
Buccal Tablet ◽  
Significant Difference ◽  
Volunteer Group

Aim: The study was aimed to develop mucoadhesive buccal tablets using Aster ericoides leaves mucilage. Background : Mucilages are naturally occurring high-molecular-weight polyuronides, which have been extensively studied for their application in different pharmaceutical dosage forms. Objective: The objective of the present research was to establish the mucilage isolated from the leaves of Aster ericoides as an excipient for the formulation of the mucoadhesive buccal tablet. Method: The mucilage was isolated from the leaves of Aster ericoides by maceration, precipitated with acetone and characterized. Tablets were prepared using wet granulation technique and evaluated for various official tests. Results: The mucilage was found to be non-toxic on A-431 and Vero cell lines. It was insoluble but swellable in cold and hot water. The results indicate that mucilage can form a three-dimensional network. The pH of the mucilage (6.82 ± 0.13) indicated that it might be non-irritant to the buccal cavity. The mucilage was found to be free from microbes. The release of drug was by Fickian diffusion. The in vivo buccal tablet acceptance was 80%. No significant difference between the diastolic blood pressure of standard and Aster tablets treated volunteer group was recorded. Conclusion: The mucilage was found to be non-toxic on A-431 and Vero cell lines. It was insoluble but swellable in cold and hot water. The results indicate that mucilage can form a three-dimensional network. The pH of the mucilage (6.82 ± 0.13) indicated that it might be non-irritant to the buccal cavity. The mucilage was found to be free from microbes. The release of drug was by Fickian diffusion. The in vivo buccal tablet acceptance was 80%. No significant difference between the diastolic blood pressure of standard and Aster tablets treated volunteer group was recorded. Other: However, to prove the potency of the polymer, in vivo bioavailability studies in human volunteers are needed along with chronic toxicity studies in suitable animal models.

scholarly journals Crystal structure of K[Hg(SCN)3] – a redetermination

2014 ◽  
Vol 70 (9) ◽  
pp. i46-i46 ◽  
Author(s):  
Matthias Weil ◽  
Thomas Häusler
Keyword(s):  
Crystal Structure ◽  
Room Temperature ◽  
Three Dimensional ◽  
Lattice Parameters ◽  
Bond Lengths ◽  
Dimensional Network ◽  
Anisotropic Displacement Parameters ◽  
Precision And Accuracy ◽  
Standard Deviations ◽  
Atomic Coordinates

The crystal structure of the room-temperature modification of K[Hg(SCN)3], potassium trithiocyanatomercurate(II), was redetermined based on modern CCD data. In comparison with the previous report [Zhdanov & Sanadze (1952).Zh. Fiz. Khim.26, 469–478], reliability factors, standard deviations of lattice parameters and atomic coordinates, as well as anisotropic displacement parameters, were revealed for all atoms. The higher precision and accuracy of the model is, for example, reflected by the Hg—S bond lengths of 2.3954 (11), 2.4481 (8) and 2.7653 (6) Å in comparison with values of 2.24, 2.43 and 2.77 Å. All atoms in the crystal structure are located on mirror planes. The Hg2+cation is surrounded by four S atoms in a seesaw shape [S—Hg—S angles range from 94.65 (2) to 154.06 (3)°]. The HgS4polyhedra share a common S atom, building up chains extending parallel to [010]. All S atoms of the resulting1∞[HgS2/1S2/2] chains are also part of SCN−anions that link these chains with the K+cations into a three-dimensional network. The K—N bond lengths of the distorted KN7polyhedra lie between 2.926 (2) and 3.051 (3) Å.

scholarly journals Construction of the Cellulose Nanofibers (CNFs) Aerogel Loading TiO2 NPs and Its Application in Disposal of Organic Pollutants

Polymers ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1841
Author(s):  
Kang Li ◽  
Xuejie Zhang ◽  
Yan Qin ◽  
Ying Li
Keyword(s):  
High Efficiency ◽  
Sol Gel ◽  
Cellulose Nanofibers ◽  
Three Dimensional ◽  
Good Mechanical Property ◽  
Polar Groups ◽  
Dimensional Network ◽  
Natural Polysaccharide ◽  
Valuable Method ◽  
Adsorption Capability

Aerogels have been widely used in the adsorption of pollutants because of their large specific surface area. As an environmentally friendly natural polysaccharide, cellulose is a good candidate for the preparation of aerogels due to its wide sources and abundant polar groups. In this paper, an approach to construct cellulose nanofibers aerogels with both the good mechanical property and the high pollutants adsorption capability through chemical crosslinking was explored. On this basis, TiO2 nanoparticles were loaded on the aerogel through the sol-gel method followed by the hydrothermal method, thereby the enriched pollutants in the aerogel could be degraded synchronously. The chemical cross-linker not only helps build the three-dimensional network structure of aerogels, but also provides loading sites for TiO2. The degradation efficiency of pollutants by the TiO2@CNF Aerogel can reach more than 90% after 4 h, and the efficiency is still more than 70% after five cycles. The prepared TiO2@CNF Aerogels have high potential in the field of environmental management, because of the high efficiency of treating organic pollutes and the sustainability of the materials. The work also provides a choice for the functional utilization of cellulose, offering a valuable method to utilize the large amount of cellulose in nature.

scholarly journals Enhanced bacterial disinfection by CuI–BiOI/rGO hydrogel under visible light irradiation

RSC Advances ◽  
2021 ◽  
Vol 11 (33) ◽  
pp. 20446-20456
Author(s):  
Xi Ma ◽  
Ziwei Wang ◽  
Haoguo Yang ◽  
Yiqiu Zhang ◽  
Zizhong Zhang ◽  
...  
Keyword(s):  
Electron Transport ◽  
Visible Light ◽  
Network Structure ◽  
Visible Light Irradiation ◽  
Three Dimensional ◽  
Light Irradiation ◽  
Transport Capacity ◽  
Highly Efficient ◽  
Dimensional Network ◽  
Bacterial Disinfection

Compared with traditional layered graphene, graphene hydrogels have been used to construct highly efficient visible light-excited photocatalysts due to their particular three-dimensional network structure and efficient electron transport capacity.

scholarly journals Investigations of polyethylene of raised temperature resistance service performance using autoclave test under sour medium conditions

e-Polymers ◽  
2021 ◽  
Vol 21 (1) ◽  
pp. 346-354
Author(s):  
Guoquan Qi ◽  
Hongxia Yan ◽  
Dongtao Qi ◽  
Houbu Li ◽  
Lushi Kong ◽  
...  
Keyword(s):  
Oil And Gas ◽  
Mechanical Performance ◽  
Three Dimensional ◽  
Service Performance ◽  
Degree Of Branching ◽  
Temperature Resistance ◽  
Temperature Conditions ◽  
Dimensional Network ◽  
Gas Medium ◽  
Better Than

Abstract The chapter deals with the performance evaluation of the polyethylene of raised temperature resistance (PE-RT) and polyethylene (PE) using autoclave test under sour oil and gas medium conditions. The analyses of performance changes showed that PE-RT has good media resistance at 60°C. As the temperature increases, its mechanical properties decrease, accompanied by an increase in weight. Comparative analyses showed that no matter what temperature conditions are, PE-RT media resistance is better than PE80. The better media resistance of PE-RT depends on its higher degree of branching. Short branches are distributed between the crystals to form a connection between the crystals, thereby improving its heat resistance and stress under high-temperature conditions. PE-RT forms an excellent three-dimensional network structure through copolymerization, ensuring that it has better media resistance than PE80. However, the mechanical performance will be attenuated due to the high service temperature.

Effects of Velvet Antler Polypeptide-Collagen/Chitosan Materials on Proliferation of Osteoblast

2013 ◽  
Vol 380-384 ◽  
pp. 4295-4298
Author(s):  
Wen He Zhu ◽  
Jun Jie Xu ◽  
Wei Zhang ◽  
Yan Li ◽  
Xiao Jing Lu ◽  
...  
Keyword(s):  
Drug Treatment ◽  
Bone Defect ◽  
Three Dimensional ◽  
Chitosan Scaffold ◽  
Release Drug ◽  
Dimensional Network ◽  
Velvet Antler ◽  
Result Show ◽  
Long Time ◽  
Velvet Antler Polypeptide

A highly osteogenic hybrid bioabsorbable scaffold was developed for bone reconstruction. Though the use of a bioabsorbable collagen and chitosan scaffold for loading velvet antler polypeptide to repair bone defect and drug treatment. Velvet antler polypeptide and collagen were extracted for developing the compounded material. The SEM results show that the collagen and chitosan scaffold maintain the natural three dimensional network structures. The cell proliferation experiment result show that the can promote the osteoblast proliferation for a long time . These results indicated that this compound scaffold can sustainable to release drug and is a good material in bone defect and drug treatment.

scholarly journals Effect of Oat β-Glucan on the Rheological Characteristics and Microstructure of Set-Type Yogurt

Molecules ◽  
2021 ◽  
Vol 26 (16) ◽  
pp. 4752
Author(s):  
Xiaoqing Qu ◽  
Yuliya Nazarenko ◽  
Wei Yang ◽  
Yuanyang Nie ◽  
Yongsheng Zhang ◽  
...  
Keyword(s):  
Sensory Evaluation ◽  
Network Structure ◽  
Theoretical Basis ◽  
Fermentation Process ◽  
Three Dimensional ◽  
Rheological Characteristics ◽  
Fermentation Time ◽  
Spherical Aggregate ◽  
Dimensional Network ◽  
Solid Liquid

The oat β-glucan (OG) was added into set-type yogurt as a functional ingredient, in order to evaluate effects on the rheological characteristics and microstructure of set-type yogurt. When the OG concentration increased from 0 to 0.3%, the WHC gradually increased. At 0.3% OG, the set-type yogurt had the highest WHC of 94.67%. Additionally, the WHC continuously decreased, reaching the lowest WHC (about 80%) at 0.5% OG. When 0.3% OG was added, the highest score of sensory evaluation was about 85. The rheological result showed that the fermentation process went through the changes as follows: solid → liquid → solid → liquid. The addition of 0.3% OG decreased the fermentation time of set-type yogurt by about 16 min, making yogurt more inclined to be liquid. The acidity of set-type yogurt with OG was slightly higher. The result of microstructure showed that the addition of OG destroyed the three-dimensional network structure of yogurt, and some spherical aggregate particles could be clearly observed at 0.3% OG. Overall, this study provided a theoretical basis for the application of OG in set-type yogurt.

scholarly journals Enhanced catalytic ozonation of ibuprofen using a 3D structured catalyst with MnO2 nanosheets on carbon microfibers

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Guhankumar Ponnusamy ◽  
Hajar Farzaneh ◽  
Yongfeng Tong ◽  
Jenny Lawler ◽  
Zhaoyang Liu ◽  
...  
Keyword(s):  
Removal Efficiency ◽  
Active Sites ◽  
Low Cost ◽  
Three Dimensional ◽  
Industrial Applications ◽  
Catalytic Ozonation ◽  
Heterogeneous Catalytic ◽  
Structured Catalyst ◽  
Dimensional Network ◽  
Carbon Microfibers

AbstractHeterogeneous catalytic ozonation is an effective approach to degrade refractory organic pollutants in water. However, ozonation catalysts with combined merits of high activity, good reusability and low cost for practical industrial applications are still rare. This study aims to develop an efficient, stable and economic ozonation catalyst for the degradation of Ibuprofen, a pharmaceutical compound frequently detected as a refractory pollutant in treated wastewaters. The novel three-dimensional network-structured catalyst, comprising of δ-MnO2 nanosheets grown on woven carbon microfibers (MnO2 nanosheets/carbon microfiber), was synthesized via a facile hydrothermal approach. Catalytic ozonation performance of Ibuprofen removal in water using the new catalyst proves a significant enhancement, where Ibuprofen removal efficiency of close to 90% was achieved with a catalyst loading of 1% (w/v). In contrast, conventional ozonation was only able to achieve 65% removal efficiency under the same operating condition. The enhanced performance with the new catalyst could be attributed to its significantly increased available surface active sites and improved mass transfer of reaction media, as a result of the special surface and structure properties of this new three-dimensional network-structured catalyst. Moreover, the new catalyst displays excellent stability and reusability for ibuprofen degradation over successive reaction cycles. The facile synthesis method and low-cost materials render the new catalyst high potential for industrial scaling up. With the combined advantages of high efficiency, high stability, and low cost, this study sheds new light for industrial applications of ozonation catalysts.

Sign in / Sign up

Export Citation Format

Share Document