scholarly journals Electric-thermal energy storage for large-scale renewables and a supercritical carbon dioxide power cycle

2020 ◽  
Author(s):  
Junhyun Cho ◽  
Hyungki Shin ◽  
Jongjae Cho ◽  
Bongsu Choi ◽  
Chulwoo Roh ◽  
...  
Keyword(s):  
Carbon Dioxide ◽  
Energy Storage ◽  
Supercritical Carbon Dioxide ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Large Scale ◽  
Power Cycle ◽  
Supercritical Carbon

Supercritical Carbon Dioxide Power Cycle Configurations for Use in Concentrating Solar Power Systems

2012 ◽  
Author(s):  
Craig S. Turchi ◽  
Zhiwen Ma ◽  
John Dyreby
Keyword(s):  
Carbon Dioxide ◽  
Energy Storage ◽  
Molten Salt ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Solar Power ◽  
Brayton Cycle ◽  
Concentrating Solar Power ◽  
Power Cycle ◽  
Cycle Efficiency

Concentrating Solar Power (CSP) plants utilize oil, molten salt or steam as the heat transfer fluid (HTF) to transfer solar energy to the power block. These fluids have properties that limit plant performance; for example, the synthetic oil and molten salt have upper temperature limits of approximately 390°C and 565°C, respectively. While direct steam generation has been tested, it requires complex controls and has limited options for integration of thermal energy storage. Use of carbon dioxide as the HTF and power cycle working fluid offers the potential to increase thermal cycle efficiency while maintaining simplicity of operation and thermal storage options. Supercritical CO2 (s-CO2) operated in a closed-loop recompression Brayton cycle offers the potential of higher cycle efficiency versus superheated or supercritical steam cycles at temperatures relevant for CSP applications. Brayton-cycle systems using s-CO2 have smaller weight and volume, lower thermal mass, and less complex power blocks versus Rankine cycles due to the higher density of the fluid and simpler cycle design. Many s-CO2 Brayton power cycle configurations have been proposed and studied for nuclear applications; the most promising candidates include recompression, precompression, and partial cooling cycles. Three factors are important for incorporating s-CO2 into CSP plants: superior performance vs. steam Rankine cycles, ability to integrate thermal energy storage, and dry-cooling. This paper will present air-cooled s-CO2 cycle configurations specifically selected for a CSP application. The systems will consider 10-MW power blocks that are tower-mounted with an s-CO2 HTF and 100-MW, ground-mounted s-CO2 power blocks designed to receive molten salt HTF from a power tower.

Numerical Investigation of Combined Sensible/Latent Heat Thermal Energy Storage With Supercritical Carbon Dioxide As Heat Transfer Fluid at 650°C

2019 ◽  
Author(s):  
Kelly Osterman ◽  
Diego Guillen ◽  
D. Yogi Goswami
Keyword(s):  
Heat Transfer ◽  
Carbon Dioxide ◽  
Energy Storage ◽  
Supercritical Carbon Dioxide ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Heat Storage ◽  
Storage System ◽  
Heat Transfer Fluid ◽  
Dry Air

Abstract This paper numerically explores a high-temperature sensible-latent hybrid thermal energy storage system designed to store heat with output temperatures stabilized at approximately 550–600 °C for direct coupling with supercritical carbon dioxide (sCO2) power cycles operating at their design point. sCO2 and dry air at 25 MPa are used as heat transfer fluid (HTF) in a packed bed storage system that combines rocks as sensible heat storage and AlSi12 as latent heat storage. The base model using dry air at atmospheric pressure is compared to similar work done at ETH Zurich; the model is then extended for use with sCO2 to compare the performance of air and sCO2 at similar volumetric flow rates. It was found that sCO2 is capable of storing a significantly larger amount of energy (∼40 kWh) in the same time period as the air system (∼19 kWh), and can discharge that energy much quicker (1.5 hours compared to 4 hours). However, in order to achieve similar degrees of temperature stabilization, the total height of PCM had to be increased significantly, from 9 cm to 45 cm or more.

Sign in / Sign up

Export Citation Format

Share Document