scholarly journals Add-on energy harvesting system using cantilever beam in an engine mount

2020 ◽  
Author(s):  
A. W. W. Atmajaya ◽  
G. Jatisukamto ◽  
A. Triono ◽  
S. N. H. Syuhri
Keyword(s):  
Energy Harvesting ◽  
Cantilever Beam ◽  
Energy Harvesting System ◽  
Engine Mount

A Creative Vibration Energy Harvesting System to Support a Self-Powered Internet of Thing (IoT) Network in Smart Bridge Monitoring

2020 ◽  
Author(s):  
Saman Farhangdoust ◽  
Claudia Mederos ◽  
Behrouz Farkiani ◽  
Armin Mehrabi ◽  
Hossein Taheri ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Cantilever Beam ◽  
Average Power ◽  
Electrical Energy ◽  
Laser Vibrometer ◽  
Stay Cable ◽  
Fe Modelling ◽  
Vibration Energy Harvesting ◽  
Piezoelectric Energy ◽  
Energy Harvesting System

Abstract This paper presents a creative energy harvesting system using a bimorph piezoelectric cantilever-beam to power wireless sensors in an IoT network for the Sunshine Skyway Bridge. The bimorph piezoelectric energy harvester (BPEH) comprises a cantilever beam as a substrate sandwiched between two piezoelectric layers to remarkably harness ambient vibrations of an inclined stay cable and convert them into electrical energy when the cable is subjected to a harmonic acceleration. To investigate and design the bridge energy harvesting system, a field measurement was required for collecting cable vibration data. The results of a non-contact laser vibrometer is used to remotely measure the dynamic characteristics of the inclined cables. A finite element study is employed to simulate a 3-D model of the proposed BPEH by COMSOL Multiphasics. The FE modelling results showed that the average power generated by the BPEH excited by a harmonic acceleration of 1 m/s2 at 1 Hz is up to 614 μW which satisfies the minimum electric power required for the sensor node in the proposed IoT network. In this research a LoRaWAN architecture is also developed to utilize the BPEH as a sustainable and sufficient power resource for an IoT platform which uses wireless sensor networks installed on the bridge stay cables to collect and remotely transfer bridge health monitoring data over the bridge in a low-power manner.

Multimodal Energy Harvesting System: Piezoelectric and Electromagnetic

2008 ◽  
Vol 20 (5) ◽  
pp. 625-632 ◽  
Author(s):  
Yonas Tadesse ◽  
Shujun Zhang ◽  
Shashank Priya
Keyword(s):  
Energy Harvesting ◽  
Resonance Frequency ◽  
Permanent Magnet ◽  
Cantilever Beam ◽  
Piezoelectric Energy Harvesting ◽  
Prototype System ◽  
Finite Element Software ◽  
Piezoelectric Energy ◽  
Energy Harvesting System ◽  
Tip Mass

In this study, we report a multimodal energy harvesting device that combines electromagnetic and piezoelectric energy harvesting mechanism. The device consists of piezoelectric crystals bonded to a cantilever beam. The tip of the cantilever beam has an attached permanent magnet which, oscillates within a stationary coil fixed to the top of the package. The permanent magnet serves two purpose (i) acts as a tip mass for the cantilever beam and lowers the resonance frequency, and (ii) acts as a core which oscillates between the inductive coils resulting in electric current generation through Faraday's effect. Thus, this design combines the energy harvesting from two different mechanisms, piezoelectric and electromagnetic, on the same platform. The prototype system was optimized using the finite element software, ANSYS, to find the resonance frequency and stress distribution. The power generated from the fabricated prototype was found to be 0.25 W using the electromagnetic mechanism and 0.25 mW using the piezoelectric mechanism at 35 g acceleration and 20 Hz frequency.

Design of piezoelectric energy harvesting system using cantilever beam

2014 ◽  
Vol 135 (4) ◽  
pp. 2218-2219
Author(s):  
Jin-Su Kim ◽  
Un-Chang Jeong ◽  
Sun-Hoon Lee ◽  
Jung-Min Jeong ◽  
Jae-Eung Oh
Keyword(s):  
Energy Harvesting ◽  
Cantilever Beam ◽  
Piezoelectric Energy Harvesting ◽  
Piezoelectric Energy ◽  
Energy Harvesting System

Dynamic modeling of a galloping structure equipped with piezoelectric wafers and energy harvesting

2019 ◽  
Vol 67 (3) ◽  
pp. 142-154 ◽  
Author(s):  
M. Y. Abdollahzadeh Jamalabadi ◽  
Moon K. Kwak
Keyword(s):  
Energy Harvesting ◽  
Cantilever Beam ◽  
Vibrational Energy ◽  
Virtual Work ◽  
Power Level ◽  
Closed Form Solutions ◽  
Multi Scale ◽  
Rigid Mass ◽  
Piezoelectric Wafer ◽  
Piezoelectric Wafers

This study presents the analytical solution and experimental investigation of the galloping energy harvesting from oscillating elastic cantilever beam with a rigid mass. A piezoelectric wafer was attached to galloping cantilever beam to harvest vibrational energy in electric charge form. Based on Euler-Bernoulli beam assumption and piezoelectric constitutive equation, kinetic energy and potential energy of system were obtained for the proposed structure. Virtual work by generated charge and galloping force applied onto the rigid mass was obtained based on Kirchhoff's law and quasistatic assumption. Nonlinear governing electro-mechanical equations were then obtained using Hamilton's principle. As the system vibrates by self-exciting force, the fundamental mode is the only one excited by galloping. Hence, multi-degreeof-freedom equation of motion is simplified to one-degree-of-freedom model. In this study, closed-form solutions for electro-mechanical equations were obtained by using multi-scale method. Using these solutions, we can predict galloping amplitude, voltage amplitude and harvested power level. Numerical and experimental results are presented and discrepancies between experimental and numerical results are fully discussed.

Sign in / Sign up

Export Citation Format

Share Document