scholarly journals A setup to measure the Seebeck coefficient and electrical conductivity of anisotropic thin-films on a single sample

2020 ◽  
Vol 91 (10) ◽  
pp. 105111
Author(s):  
Bernhard Dörling ◽  
Osnat Zapata-Arteaga ◽  
Mariano Campoy-Quiles
Keyword(s):  
Thin Films ◽  
Electrical Conductivity ◽  
Seebeck Coefficient ◽  
Single Sample

scholarly journals Effect of Grain Size and Film Thickness on the Thermoelectric Properties of Flexible Sb2Te3 Thin Films

2019 ◽  
Vol 2019 ◽  
pp. 1-7 ◽  
Author(s):  
Pornsiri Wanarattikan ◽  
Piya Jitthammapirom ◽  
Rachsak Sakdanuphab ◽  
Aparporn Sakulkalavek
Keyword(s):  
Thin Films ◽  
Thermal Conductivity ◽  
Electrical Conductivity ◽  
Grain Size ◽  
Film Thickness ◽  
Seebeck Coefficient ◽  
Thermoelectric Properties ◽  
Flexible Substrate ◽  
Rf Magnetron Sputtering ◽  
Mean Free Path

In this work, stoichiometric Sb2Te3 thin films with various thicknesses were deposited on a flexible substrate using RF magnetron sputtering. The grain size and thickness effects on the thermoelectric properties, such as the Seebeck coefficient (S), electrical conductivity (σ), power factor (PF), and thermal conductivity (k), were investigated. The results show that the grain size was directly related to film thickness. As the film thickness increased, the grain size also increased. The Seebeck coefficient and electrical conductivity corresponded to the grain size of the films. The mean free path of carriers increases as the grain size increases, resulting in a decrease in the Seebeck coefficient and increase in electrical conductivity. Electrical conductivity strongly affects the temperature dependence of PF which results in the highest value of 7.5 × 10−4 W/m·K2 at 250°C for film thickness thicker than 1 µm. In the thermal conductivity mechanism, film thickness affects the dominance of phonons or carriers. For film thicknesses less than 1 µm, the behaviour of the phonons is dominant, while both are dominant for film thicknesses greater than 1 µm. Control of the grain size and film thickness is thus critical for controlling the performance of Sb2Te3 thin films.

Effects of MeV Si Ions Modification on the Thermoelectric Properties of SiO2/SiO2+Cu Multilayer Thin Films

2010 ◽  
Vol 1267 ◽  
Author(s):  
John Chacha ◽  
S. Budak ◽  
Cydale Smith ◽  
Marcus Pugh ◽  
Kudus Ogbara ◽  
...  
Keyword(s):  
Thin Films ◽  
Thermal Conductivity ◽  
Electrical Conductivity ◽  
Seebeck Coefficient ◽  
Ion Beam ◽  
Absolute Temperature ◽  
Conductivity Increase ◽  
Before And After ◽  
The Cross ◽  
Thermoelectric Thin Films

AbstractThe performance of the thermoelectric materials and devices is shown by a dimensionless figure of merit, ZT = S2σT/K, where S is the Seebeck coefficient, σ is the electrical conductivity, T is the absolute temperature and K is the thermal conductivity. ZT can be increased by increasing S, increasing σ, or decreasing K. We have prepared 100 alternating multi-nano layer of SiO2/SiO2+Cu superlattice films using the ion beam assisted deposition (IBAD). The 5 MeV Si ions bombardments have been performed at the different fluences using the AAMU Pelletron ion beam accelerator to make quantum clusters in the multi-layer superlattice thin films to decrease the cross plane thermal conductivity increase the cross plane Seebeck coefficient and cross plane electrical conductivity. To characterize the thermoelectric thin films before and after Si ion bombardments we have measured the cross-plane Seebeck coefficient, the cross-plane electrical conductivity, and the cross-plane thermal conductivity for different fluences.

Uni-Leg Thermoelectric Module Comprised by Coated Hybrid-Perovskite Thin Film

2019 ◽  
Author(s):  
Shrikant Saini ◽  
Ajay Kumar Baranwal ◽  
Tomohide Yabuki ◽  
Shuzi Hayase ◽  
Koji Miyazaki
Keyword(s):  
Thin Films ◽  
Thermal Conductivity ◽  
Electrical Conductivity ◽  
Seebeck Coefficient ◽  
Flexible Electronics ◽  
Thermoelectric Module ◽  
Electrical Energy ◽  
Maximum Output ◽  
Thermoelectric Modules ◽  
Wet Process

Abstract Thermoelectric materials can convert thermal energy into electrical energy without any moving part which leads its path of application to the era of printed and flexible electronics. CsSnI3 perovskite can be a promising thermoelectric material for the next-generation energy conversion due to its intrinsic ultra-low thermal conductivity and large Seebeck coefficient but enhancement of electrical conductivity is still required. CsSnI3 can be prepared by wet process which can reduce the cost of flexible thermoelectric module. In this work, CsSnI3 thin films were fabricated by spin coating wet process. Thin films were structurally and chemically characterized using XRD and SEM. Thermoelectric properties such as electrical conductivity, Seebeck coefficient, and thermal conductivity were measured at 300 K. Uni-leg thermoelectric modules were fabricated on a glass substrate using CsSnI3 thin films. The maximum output is about 0.8 nW for 5 legs (25 mm × 3 mm × 600 nm) modules for the temperature difference of about 5°C. These results will open a new pathway to thermoelectric modules for flexible electronics in spite of low output power.

Thermoelectric Properties of YbBiPt and YBiPt Thin Films

2008 ◽  
Vol 1100 ◽  
Author(s):  
Sadik Guner ◽  
Satilmis Budak ◽  
Claudiu I Muntele ◽  
Daryush Ila
Keyword(s):  
Thin Films ◽  
Thermal Conductivity ◽  
Electrical Conductivity ◽  
Seebeck Coefficient ◽  
Thermoelectric Properties ◽  
Figure Of Merit ◽  
Rutherford Backscattering Spectrometry ◽  
Conductivity Measurement ◽  
Electronic Energy ◽  
Before And After

AbstractMonolayer thin films of YbBiPt and YBiPt have been produced with 560 nm and 394 nm thick respectively in house and their thermoelectric properties were measured before and after MeV ion bombardment. The energy of the ions were selected such that the bombarding Si ions stop in the silicon substrate and deposit only electronic energy by ionization in the deposited thin film. The bombardment by 5.0 MeV Si ions at various fluences changed the homogeneity as well as reducing the internal stress in the films thus affecting the thermal, electrical and Seebeck coefficient of thin films. The stoichiometry of the thin films was determined using Rutherford Backscattering Spectrometry, the thickness has been measured using interferometry and the electrical conductivity was measured using Van der Pauw method. Thermal conductivity of the thin films was measured using an in-house built 3ω thermal conductivity measurement system. Using the measured Seebeck coefficient, thermal conductivity and electrical conductivity we calculated the figure of merit (ZT). We will report our findings of change in the measured figure of merit as a function of bombardment fluence.

Cross-Plane Thermoelectric Properties in Si/Ge Superlattices

2001 ◽  
Vol 691 ◽  
Author(s):  
Bao Yang ◽  
Jian L. Liu ◽  
Kang L. Wang ◽  
Gang Chen
Keyword(s):  
Thin Films ◽  
Thermal Conductivity ◽  
Electrical Conductivity ◽  
Seebeck Coefficient ◽  
Molecular Beam ◽  
Temperature Sensors ◽  
Transmission Line Model ◽  
Voltage Oscillation ◽  
Plane Direction ◽  
The Cross

ABSTRACTIn this paper, a set of methods is developed to measure the Seebeck coefficient, electrical conductivity, and thermal conductivity in the cross-plane direction of thin films. The method employs microfabricated heaters, voltage and temperature sensors, and phase-lock amplifiers to determine the temperature and Seebeck voltage oscillation in the cross-plane direction of the samples, from which the thermal conductivity and Seebeck coefficient of thin films are determined simultaneously. The cross-plane electrical conductivity is also measured by a modified transmission line model. These methods are applied to Si/Ge superlattices grown by molecular beam epitaxy.

scholarly journals Effects of Sintering Atmosphere on the Optical, Thermal and Electrical Properties of Inkjet Printed ZnxCu(1-x)Fe2O4 Thin Films

2021 ◽  
Vol 81 (2) ◽  
pp. 25-35
Author(s):  
Lim Joon Hoong
Keyword(s):  
Thin Films ◽  
Electrical Conductivity ◽  
Seebeck Coefficient ◽  
Band Gap ◽  
Optical Band Gap ◽  
Electronic Band Structure ◽  
Copper Ferrite ◽  
Electronic Band ◽  
Sintering Atmosphere ◽  
P Type

The effects of sintering atmosphere on the optical, thermal and electric properties of inkjet printed ZnxCu(1-x)Fe2O4 thin films have been investigated. The thin film samples were sintered separately in vacuum and oxygen. The obtained samples were then characterized by X-ray diffraction (XRD), optical band gap, electrical conductivity, Seebeck coefficient and thermal conductivity. XRD analysis showed that the fabricated samples have a cubic spinel structure of zinc copper ferrite regardless of the sintering atmosphere. The electrical conductivity of ZnxCu(1-x)Fe2O4 thin films sintered in oxygen was about 5 % higher compared to ZnxCu(1-x)Fe2O4 thin films sintered in vacuum. The optical band gap shows that the samples sintered in oxygen had smaller band gap compared to samples sintered in vacuum. The electronic band structure simulated through ABINIT shows ZnxCu(1-x)Fe2O4 is an indirect band gap material. A smaller electronic band gap was observed in O2 rich condition and was in agreement with the optical band gap and electrical conductivity test results. Seebeck coefficient of ZnxCu(1-x)Fe2O4 thin films sintered in oxygen remained positive , confirming charge transport by hole carries as p-type semiconductors. A change from p-type to n-type semiconductors was observed when ZnxCu(1-x)Fe2O4 thin films sintered in vacuum.

Thermoelectric properties of PbTe thin films prepared by gas evaporation method

1999 ◽  
Vol 14 (1) ◽  
pp. 209-212 ◽  
Author(s):  
Masatoshi Ito ◽  
Won-Son Seo ◽  
Kunihito Koumoto
Keyword(s):  
Thin Films ◽  
Electrical Conductivity ◽  
Grain Size ◽  
Seebeck Coefficient ◽  
Grain Boundaries ◽  
Carrier Concentration ◽  
Thermoelectric Properties ◽  
Carrier Mobility ◽  
Evaporation Method

PbTe thin films with fine grains were successfully fabricated by the gas evaporation method. Thermoelectric properties, i.e., Seebeck coefficient and electrical conductivity, both decreased with decreasing grain size. This was attributed to the decrease in carrier mobility exceeding the increase in carrier concentration with decreasing grain size. It was clarified that the effects of grain boundaries and of oxidation on carrier mobility are considerably large.

Low temperature electrical conductivity and seebeck coefficient of nanostructured CuSe thin films with Ga addition

Vacuum ◽  
2016 ◽  
Vol 129 ◽  
pp. 74-78 ◽  
Author(s):  
Anitha Abraham ◽  
Tarachand ◽  
Gunadhor S. Okram ◽  
Rajani Jacob ◽  
P.V. Sreenivasan ◽  
...  
Keyword(s):  
Thin Films ◽  
Electrical Conductivity ◽  
Low Temperature ◽  
Seebeck Coefficient

scholarly journals Understanding the effect of thickness on the thermoelectric properties of Ca3Co4O9 thin films

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Yinong Yin ◽  
Ashutosh Tiwari
Keyword(s):  
Thin Films ◽  
Electrical Conductivity ◽  
Seebeck Coefficient ◽  
Power Factor ◽  
Functional Dependence ◽  
Island Growth ◽  
Force Microscopy ◽  
Atomic Force ◽  
Power Measurements ◽  
Single Crystal Sapphire

AbstractWe are reporting the effect of thickness on the Seebeck coefficient, electrical conductivity and power factor of Ca3Co4O9 thin films grown on single-crystal Sapphire (0001) substrate. Pulsed laser deposition (PLD) technique was employed to deposit Ca3Co4O9 films with precisely controlled thickness values ranging from 15 to 75 nm. Structural characterization performed by scanning electron microscopy (SEM) and atomic force microscopy (AFM) showed that the growth of Ca3Co4O9 on Sapphire (0001) follows the island growth-mode. It was observed that in-plane grain sizes decrease from 126 to 31 nm as the thickness of the films decreases from 75 to 15 nm. The thermoelectric power measurements showed an overall increase in the value of the Seebeck coefficient as the films’ thickness decreased. The above increase in the Seebeck coefficient was accompanied with a simultaneous decrease in the electrical conductivity of the thinner films due to enhanced scattering of the charge carriers at the grain boundaries. Because of the competing mechanisms of the thickness dependence of Seebeck coefficient and electrical conductivity, the power factor of the films showed a non-monotonous functional dependence on thickness. The films with the intermediate thickness (60 nm) showed the highest power factor (~ 0.27 mW/m-K2 at 720 K).

scholarly journals An enhanced power factor via multilayer growth of Ag-doped skutterudite CoSb3 thin films

2018 ◽  
Vol 5 (6) ◽  
pp. 1409-1414 ◽  
Author(s):  
Zhuang-Hao Zheng ◽  
Meng Wei ◽  
Jing-Ting Luo ◽  
Fu Li ◽  
Guang-Xing Liang ◽  
...  
Keyword(s):  
Thin Films ◽  
Electrical Conductivity ◽  
Seebeck Coefficient ◽  
Power Factor ◽  
Ag Doping

The Seebeck coefficient and electrical conductivity of the CoSb3 thin films are enhanced after Ag doping, leading to substantial enhancement of the power factor.

Sign in / Sign up

Export Citation Format

Share Document