Synthesis of titanium oxysulfate from ilmenite through hydrothermal, water leaching and sulfuric acid leaching routes

2020 ◽  
Author(s):  
Ahmad Fauzi ◽  
Latifa Hanum Lalasari ◽  
Nofrijon Sofyan ◽  
Donanta Dhaneswara ◽  
Akhmad Herman Yuwono
Keyword(s):  
Sulfuric Acid ◽  
Acid Leaching ◽  
Sulfuric Acid Leaching ◽  
Water Leaching ◽  
Hydrothermal Water

scholarly journals Performance of Sulfuric Acid Leaching of Titanium from Titanium-Bearing Electric Furnace Slag

2016 ◽  
Vol 5 (4) ◽  
pp. 1 ◽  
Author(s):  
XiaoMing Qu ◽  
YuFeng Guo ◽  
FuQiang Zheng ◽  
Tao Jiang ◽  
GuanZhou Qiu
Keyword(s):  
Sulfuric Acid ◽  
Electric Furnace ◽  
Sulfuric Acid Concentration ◽  
Acid Leaching ◽  
Sulfuric Acid Leaching ◽  
Water Leaching ◽  
Experimental Conditions ◽  
Leaching Process ◽  
Leaching Residue ◽  
Furnace Slag

<p class="1Body">The sulfuric acid leaching of titanium from titanium-bearing electric furnace slag (TEFS) was investigated under different experimental conditions. In the sulfuric acid leaching process, the M<sub>x</sub>Ti<sub>3-x</sub>O<sub>5</sub>(0≤x≤2) and diopside could react with sulfuric acid. The optimum conditions of sulfuric acid leaching process were particle size at &lt; 0.045mm, sulfuric acid concentration at 90 wt.%, acid/slag mass ratio at 1.6:1, feeding temperature at 120 °C, reaction temperature at 220 °C, reaction time at 120minute, curing at 200°C for 120 minute. The [TiO<sub>2</sub>] concentration of the water leaching was 150 g/L, and leaching temperature at 60℃for 120 minute. Ti extraction could reach 84.29 %. F of titanium-bearing solution was 2.15, and the Ti<sup>3+</sup>/TiO<sub>2</sub> of the titanium-bearing solution was 0.068. The TiO<sub>2</sub> content of the leaching residue was 18.32 wt.%. The main mineral phases of the leaching residue were calcium sulphate, spinel, diopside and little M<sub>x</sub>Ti<sub>3-x</sub>O<sub>5</sub>.</p>

scholarly journals Purification of the Acidic Vanadium-Bearing Solution with a Novel Approach of Chemical Precipitation

Metals ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 625
Author(s):  
Juhua Zhang ◽  
Wei Zhang ◽  
Chengzhi Li
Keyword(s):  
Sulfuric Acid ◽  
Vanadium Pentoxide ◽  
Acid Leaching ◽  
Chemical Precipitation ◽  
Ammonium Persulfate ◽  
Precipitation Method ◽  
Sulfuric Acid Leaching ◽  
Water Leaching ◽  
Dilute Sulfuric Acid ◽  
Novel Approach

Calcified roasting followed by dilute sulfuric acid leaching is a promising process for cleaner vanadium extraction from converter vanadium slag. However, some impurities, like Ca, Mg, Mn, Si and Al, also transfer into the leaching solution, accompanying V during the dilute sulfuric acid leaching, leading to the product of vanadium pentoxide prepared from this acidic vanadium-bearing solution, inferior to the product from the traditional process of sodium roasting and water leaching. A chemical precipitation method was firstly proposed to purify this acidic vanadium-bearing solution with a new prepared remover of MnNH4F3, which combines neutralization and fluoride precipitation into one operational step to remove impurities of Ca2+, Mg 2+, Al3+ and Si4+ in an acidic pH range, simultaneously. Effecting factors involved in the purification process were investigated. It was found that removals of Ca, Mg and Al were all over 95% and around 55% of Si was removed as well at stirring speed of 200 rpm, adding coefficient of 1.6, temperature of 50 °C, reaction time of 30 min and pH of 4.50 ± 0.05, while the loss of vanadium was kept lower than 5%, which was attributed to the reason that the purification reactions mainly proceeded on the surface of the remover. Adding flocculant of polyacrylamide was conductive to accelerating sedimentation of the precipitate and reducing the loss of vanadium. Meanwhile, the filter aid of diatomaceous could improve the filtration performance of the slurry. Ammonium persulfate could effectively oxidize and separate Mn2+ in the form of MnO2 from the vanadium-bearing solution which had been treated by MnNH4F3, but performed less selectivity over Mn2+, and the loss of vanadium was unacceptable. The product of vanadium pentoxide prepared from the purified vanadium-containing solution satisfied the requirements for the standard of grade 98.

scholarly journals Study on Ultrasonically-Enhanced Sulfuric Acid Leaching of Nickel from Nickel-Containing Residue

Crystals ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 810
Author(s):  
Zhanyong Guo ◽  
Ping Guo ◽  
Guang Su ◽  
Fachuang Li
Keyword(s):  
Sulfuric Acid ◽  
Acid Leaching ◽  
Ultrasonic Waves ◽  
Sulfuric Acid Leaching ◽  
Solid Product ◽  
Leaching Process ◽  
Diffusion Controlled ◽  
Extraction Degree ◽  
Ultrasonic Conditions ◽  
Complex Nickel

In this paper, nickel-containing residue, a typical solid waste produced in the battery production process, was used to study the cavitation characteristics of ultrasonic waves in a liquid–solid reaction. The ultrasonically-enhanced leaching technology for multicomponent and complex nickel-containing residue was studied through systematic ultrasonic-conventional comparative experiments. An ultrasonic leaching kinetics model was established which provided reliable technological guidance and basic theory for the comprehensive utilization of nickel-containing residue. In the study, it was found that ultrasonically-enhanced leaching for 40 min obtained the same result as conventional leaching for 80 min, and the Ni extraction degree reached more than 95%. According to the kinetic fitting of the leaching process, it was found that the sulfuric acid leaching process belonged to the diffusion-controlled model of solid product layers under conventional and ultrasonic conditions, and the activation energy of the reaction was Ea1 = 17.74 kJ/mol and Ea2 = 5.04 kJ/mol, respectively.

Removal of Fe(III) from sulfuric acid leaching solution of phosphate ores with bisphosphonic acids

2021 ◽  
pp. 105799
Author(s):  
Chengjin Xu ◽  
Ling Li ◽  
Miaomiao Zhang ◽  
Xiao Meng ◽  
Xiujing Peng ◽  
...  
Keyword(s):  
Sulfuric Acid ◽  
Acid Leaching ◽  
Sulfuric Acid Leaching ◽  
Leaching Solution ◽  
Bisphosphonic Acids ◽  
Phosphate Ores

Sulfuric Acid Leaching of Bangka Indonesia Ilmenite Ore and Ilmenite Decomposed by NaOH

2013 ◽  
Vol 789 ◽  
pp. 522-530 ◽  
Author(s):  
Latifa Hanum Lalasari ◽  
Rudi Subagja ◽  
Akhmad Herman Yuwono ◽  
Florentinus Firdiyono ◽  
Sri Harjanto ◽  
...  
Keyword(s):  
Titanium Dioxide ◽  
Sulfuric Acid ◽  
Solvent Extraction ◽  
Acid Leaching ◽  
Raw Material ◽  
Key Factors ◽  
Sulfuric Acid Leaching ◽  
Acid Environment

lmenite (FeO.TiO2) ore from Bangka island-Indonesia is a potential raw material for synthesizing titanium dioxide (TiO2), which can be used further as pigmen and photocatalyst. The fabrication of TiO2 particles from ilmenite can be carried out through the solvent extraction using sulfuric acid route. Therefore, the solubility of the ilmenite ore in sulfuric acid environment is one of the key factors to obtain the desired TiO2 particles. The current research is aimed at comparing the solubility of pristine Bangka ilmenite ore with that of precedingly decomposed by sodium hidroxide (NaOH) in pressurized and atmospheric reflux reactors. The dissolution of both precursors was carried out in those reactors under various temperatures of 75, 100, 125, 150 and 175°C. The results showed that the optimum dilution was achieved at 150°C. The obtained recovery of ilmenite was 88.8 % for the pressurized reactor and 75.5% for the atmospheric reflux reactor. The solubility of titanium (Ti) element increased steadily to reach a recovery of 68% at 150°C and decreased significantly afterwards. It was also found that the increase of iron (Fe) element solubility was proportional to the increase of processing temperatures.

scholarly journals Extraction of Ta and Nb from a Coltan Bearing Ore by Means of Ammonium Bifluoride Fluorination and Sulfuric Acid Leaching

Minerals ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 1392
Author(s):  
Alidor Shikika ◽  
Francois Zabene ◽  
Fabrice Muvundja ◽  
Mac C. Mugumaoderha ◽  
Julien L. Colaux ◽  
...  
Keyword(s):  
Sulfuric Acid ◽  
Acid Leaching ◽  
Environmental Benefits ◽  
Process Conditions ◽  
Sulfuric Acid Leaching ◽  
Mechanical Agitation ◽  
Ammonium Bifluoride ◽  
Novel Approach ◽  
Pre Treatment ◽  
Subsequent Acid

A novel approach for Ta and Nb extraction consisting of the pre-treatment of a coltan-bearing ore with an ammonium bifluoride sub-molten salt and subsequent acid leaching has been studied. The effects from ore granulometry, ammonium bifluoride (ABF) to ore mass ratio, temperature and duration of fluorination on the degree of Ta and Nb extraction were examined. The ABF to ore ratio and process temperature were found to have the most pronounced impact on extraction efficiency. The following optimal process conditions were determined: ore granulometric fraction (−75 + 45 µm), ABF-ore (5/1), fluorination temperature (200 °C) and fluorination time (2.5 h). Maintaining these parameters enabled about 94% of Ta and 95% of Nb to be brought into solution during the sulfuric-acid-leaching stage. A comparison of the proposed method with previously reported studies suggests that due to the effects of mechanical agitation and the recirculation of the HF-containing gaseous phase back into the process, the dosage rate of ABF at the fluorination stage could be reduced significantly without sacrificing the overall recovery of Ta and Nb. In such a way, the approach could offer added environmental benefits since release of fluoride-containing effluents into the environment could be limited.

scholarly journals Beneficiation and Sulfuric Acid Leaching of Manganese Ore

2021 ◽  
Author(s):  
Sukhbat Sandag-Ochir ◽  
Zagarzusem Tsedendamba ◽  
Orgilbayar Batkhuyag ◽  
Jargalsaikhan Lkhasuren ◽  
Khasbaatar Dashkhuu ◽  
...  
Keyword(s):  
Sulfuric Acid ◽  
Acid Leaching ◽  
Manganese Ore ◽  
Sulfuric Acid Leaching
Sign in / Sign up

Export Citation Format

Share Document