Combining application of wavelet analysis and genetic algorithm in wind tunnel simulation of unidirectional natural wind field near a sand ground surface

2021 ◽  
Vol 92 (1) ◽  
pp. 015123
Author(s):  
Zhang Bo ◽  
Zhou Xiaosi ◽  
Liu Yuxin ◽  
Yang Bin ◽  
Zhang Yang
Keyword(s):  
Genetic Algorithm ◽  
Wind Tunnel ◽  
Wavelet Analysis ◽  
Wind Field ◽  
Ground Surface ◽  
Wind Tunnel Simulation ◽  
Natural Wind

scholarly journals Experimental Study of the Aerodynamics of Sail in Natural Wind

2018 ◽  
Vol 25 (s2) ◽  
pp. 17-22
Author(s):  
Zeng Xiangming ◽  
Zhang Huawu
Keyword(s):  
Experimental Study ◽  
Wind Tunnel ◽  
Drag Coefficient ◽  
Wind Field ◽  
Effectiveness Evaluation ◽  
Wind Tunnel Tests ◽  
The Impact ◽  
Natural Wind

Abstract In order to evaluate the impacts of a motor vessel after installing wind sails, the aerodynamics of the sail should be accurately calculated. However most of the research on sails are based on stable wind instead of natural wind which is changing horizontally and vertically. In this paper wind tunnel tests are carried out based on stable wind field and simulated natural wind field, the results shown that there are 16–44% decrease in natural wind in terms of lifting coefficient and 11–42% decrease for drag coefficient. This would provide a valuable reference to the effectiveness evaluation of the impact of sails for sail assisted ships.

Wind tunnel tests and dynamic analysis of wind-induced response of a transmission tower on a hill

2021 ◽  
pp. 136943322110339
Author(s):  
Jian Guo ◽  
Changliang Xiao ◽  
Jiantao Li
Keyword(s):  
Wind Tunnel ◽  
Wind Field ◽  
Dynamic Responses ◽  
Interactive Effects ◽  
Induced Response ◽  
Transmission Tower ◽  
Structural Dynamic ◽  
Wind Tunnel Tests ◽  
Hill Slope ◽  
The Hill

A hill with a lattice transmission tower presents complex wind field characteristics. The commonly used computational fluid dynamics (CFD) simulations are difficult to analyze the wind resistance and dynamic responses of the transmission tower due to structural complexity. In this study, wind tunnel tests and numerical simulations are conducted to analyze the wind field of the hill and the dynamic responses of the transmission tower built on it. The hill models with different slopes are investigated by wind tunnel tests to measure the wind field characteristics, such as mean speed and turbulence intensity. The study shows that the existence of a transmission tower reduces the wind speed on the leeward slope significantly but has little effect on the windward slope. To study the dynamic behavior of the transmission tower, a hybrid analysis procedure is used by introducing the measured experimental wind information to the finite element tower model established using ANSYS. The effects of hill slope on the maximum displacement response of the tower are studied. The results show that the maximum value of the response is the largest when the hill slope is 25° compared to those when hill slope is 15° and 35°. The results extend the knowledge concerning wind tunnel tests on hills of different terrain and provide a comprehensive understanding of the interactive effects between the hill and existing transmission tower regarding to the wind field characteristics and structural dynamic responses.

A new atmospheric boundary layer wind tunnel simulation methodology for wind effects on large cooling towers considering wind environment variations

2018 ◽  
Vol 22 (5) ◽  
pp. 1194-1210 ◽  
Author(s):  
XX Cheng ◽  
X Chen ◽  
YJ Ge ◽  
H Jiang ◽  
L Zhao
Keyword(s):  
Boundary Layer ◽  
Wind Tunnel ◽  
Atmospheric Boundary Layer ◽  
Model Test ◽  
Test Results ◽  
Wind Effects ◽  
Simulation Methodology ◽  
Codes Of Practice ◽  
Wind Tunnel Simulation ◽  
Tunnel Model

The traditional atmospheric boundary layer wind tunnel model test practice employs wind fields, the flow characteristics of which are in accordance with the empirical formulae of the atmospheric turbulence presented in Codes of Practice and monographs. However, the empirical formulae presented in Codes of Practice and monographs cannot truthfully reflect the high variations of the realistic atmospheric turbulence which sometimes aggravates wind effects on structures. Based on model tests conducted in a multiple-fan actively controlled wind tunnel, it is found that most wind effects on large cooling towers change monotonically with the increase in free-stream turbulence, and the model test results are more unfavorable for a flow field of low turbulence intensity than for a flow field of high turbulence intensity with respect to the measured coherences. Thus, a new atmospheric boundary layer wind tunnel simulation methodology for wind effects on circular cylindrical structures is proposed to overcome the deficiency of the traditional atmospheric boundary layer wind tunnel model tests. The new simulation methodology includes the simulation of two realistic atmospheric boundary layer flow fields with the highest and the lowest turbulence intensities in the wind tunnel and the envelopment of model test results obtained in the two flow fields (e.g. the mean and fluctuating wind pressure distributions, the power spectral density, the coherence function, and the correlation coefficient). The superiority of the new atmospheric boundary layer wind tunnel simulation methodology over the traditional model test practice is demonstrated by comparing the model test results with the full-scale measurement data.

A wind tunnel simulation of the mean velocity fields behind upright porous fences

2007 ◽  
Vol 146 (1-2) ◽  
pp. 82-93 ◽  
Author(s):  
Zhibao Dong ◽  
Wanyin Luo ◽  
Guangqiang Qian ◽  
Hongtao Wang
Keyword(s):  
Wind Tunnel ◽  
Velocity Fields ◽  
Mean Velocity ◽  
Wind Tunnel Simulation ◽  
The Mean
Sign in / Sign up

Export Citation Format

Share Document