On sustaining turbulence production in interacting supersonic streamwise vortices

2020 ◽  
Vol 32 (7) ◽  
pp. 076102 ◽  
Author(s):  
D. Viganò ◽  
L. Maddalena
Keyword(s):  
Streamwise Vortices ◽  
Turbulence Production

Interaction of large three-dimensional eddies and small streamwise vortices

AIAA Journal ◽  
1998 ◽  
Vol 36 ◽  
pp. 1330-1332
Author(s):  
Roy Y. Myose ◽  
Ron F. Blackwelder
Keyword(s):  
Three Dimensional ◽  
Streamwise Vortices

Visualization of Counter-rotating Streamwise Vortices in a Rectangular Channel with One-sided Wavy Surface

2013 ◽  
Author(s):  
Alexander C. Budiman ◽  
Hatsari Mitsudharmadi ◽  
Hong Tong Low ◽  
S. Winoto
Keyword(s):  
Rectangular Channel ◽  
Wavy Surface ◽  
Streamwise Vortices

Numerical Investigation of Passive Flow Control Using Wavy Blades in a Highly-Loaded Compressor Cascade

2018 ◽  
Author(s):  
Bo Wang ◽  
Yanhui Wu ◽  
Kai Liu
Keyword(s):  
Numerical Investigation ◽  
Flow Structure ◽  
Cross Flow ◽  
Leading Edge ◽  
Control Flow ◽  
Streamwise Vortices ◽  
Compressor Cascade ◽  
Control Effect ◽  
Suction Surface ◽  
Highly Loaded

Driven by the need to control flow separations in highly loaded compressors, a numerical investigation is carried out to study the control effect of wavy blades in a linear compressor cascade. Two types of wavy blades are studied with wavy blade-A having a sinusoidal leading edge, while wavy blade-B having pitchwise sinusoidal variation in the stacking line. The influence of wavy blades on the cascade performance is evaluated at incidences from −1° to +9°. For the wavy blade-A with suitable waviness parameters, the cascade diffusion capacity is enhanced accompanied by the loss reduction under high incidence conditions where 2D separation is the dominant flow structure on the suction surface of the unmodified blade. For well-designed wavy blade-B, the improvement of cascade performance is achieved under low incidence conditions where 3D corner separation is the dominant flow structure on the suction surface of the baseline blade. The influence of waviness parameters on the control effect is also discussed by comparing the performance of cascades with different wavy blade configurations. Detailed analysis of the predicted flow field shows that both the wavy blade-A and wavy blade-B have capacity to control flow separation in the cascade but their control mechanism are different. For wavy blade-A, the wavy leading edge results in the formation of counter-rotating streamwise vortices downstream of trough. These streamwise vortices can not only enhance momentum exchange between the outer flow and blade boundary layer, but also act as the suction surface fence to hamper the upwash of low momentum fluid driven by cross flow. For wavy blade-B, the wavy surface on the blade leads to a reduction of the cross flow upwash by influencing the spanwise distribution of the suction surface static pressure and guiding the upwash flow.

Effects of Squish Flow on Tangential Flow and Turbulence in a Diesel Engine

2019 ◽  
Vol 141 (5) ◽  
Author(s):  
Yanzhe Sun ◽  
Kai Sun ◽  
Tianyou Wang ◽  
Yufeng Li ◽  
Zhen Lu
Keyword(s):  
Diesel Engine ◽  
Turbulent Flows ◽  
Large Scale ◽  
Radial Flow ◽  
Tangential Component ◽  
Tangential Flow ◽  
Image Velocimetry ◽  
Turbulence Production ◽  
Large Scale Flow ◽  
Main Effects

Emission and fuel consumption in swirl-supported diesel engines strongly depend on the in-cylinder turbulent flows. But the physical effects of squish flow on the tangential flow and turbulence production are still far from well understood. To identify the effects of squish flow, Particle image velocimetry (PIV) experiments are performed in a motored optical diesel engine equipped with different bowls. By comparing and associating the large-scale flow and turbulent kinetic energy (k), the main effects of the squish flow are clarified. The effect of squish flow on the turbulence production in the r−θ plane lies in the axial-asymmetry of the annular distribution of radial flow and the deviation between the ensemble-averaged swirl field and rigid body swirl field. Larger squish flow could promote the swirl center to move to the cylinder axis and reduce the deformation of swirl center, which could decrease the axial-asymmetry of annular distribution of radial flow, further, that results in a lower turbulence production of the shear stress. Moreover, larger squish flow increases the radial fluctuation velocity which makes a similar contribution to k with the tangential component. The understanding of the squish flow and its correlations with tangential flow and turbulence obtained in this study is beneficial to design and optimize the in-cylinder turbulent flow.

Experiments on streamwise vortices in curved wall jet flow

1995 ◽  
Vol 7 (12) ◽  
pp. 2978-2988 ◽  
Author(s):  
O. John E. Matsson
Keyword(s):  
Jet Flow ◽  
Wall Jet ◽  
Streamwise Vortices ◽  
Wall Jet Flow
Sign in / Sign up

Export Citation Format

Share Document