Electrochemical impedance behaviour of SS-309Mo and inconel 625 weld overlay on carbon steel at different applied voltages

2020 ◽  
Author(s):  
A. Amudha ◽  
H. S. Nagaraja ◽  
H. D. Shashikala
Keyword(s):  
Carbon Steel ◽  
Electrochemical Impedance ◽  
Inconel 625 ◽  
Weld Overlay

The study of the electrochemical properties of zinc-rich coating on the base of water sodium silicate

2019 ◽  
Vol 24 (4) ◽  
pp. 51-58
Author(s):  
Le Hong Quan ◽  
Nguyen Van Chi ◽  
Mai Van Minh ◽  
Nong Quoc Quang ◽  
Dong Van Kien
Keyword(s):  
Carbon Steel ◽  
Electrochemical Properties ◽  
Sodium Silicate ◽  
Cathodic Protection ◽  
Electrochemical Impedance ◽  
Steel Substrate ◽  
Electrical Contact ◽  
Electrochemical Impedance Spectra ◽  
Pure Zinc ◽  
Electric Circuits

The study examines the electrochemical properties of a coating based on water sodium silicate and pure zinc dust (ZSC, working title - TTL-VN) using the Electrochemical Impedance Spectra (EIS) with AutoLAB PGSTAT204N. The system consists of three electrodes: Ag/AgCl (SCE) reference electrode in 3 M solution of KCl, auxiliary electrode Pt (8x8 mm) and working electrodes (carbon steel with surface treatment up to Sa 2.5) for determination of corrosion potential (Ecorr) and calculation of equivalent electric circuits used for explanation of impedance measurement results. It was shown that electrochemical method is effective for study of corrosion characteristics of ZSC on steel. We proposed an interpretation of the deterioration over time of the ability of zinc particles in paint to provide cathodic protection for carbon steel. The results show that the value of Ecorr is between -0,9 and -1,1 V / SCE for ten days of diving. This means that there is an electrical contact between the zinc particles, which provides good cathodic protection for the steel substrate and most of the zinc particles were involved in the osmosis process. The good characteristics of the TTL-VN coating during immersion in a 3,5% NaCl solution can also be explained by the preservation of corrosive zinc products in the coating, which allows the creation of random barrier properties.

scholarly journals Corrosion behaviors of 316 stainless steel and Inconel 625 alloy in chloride molten salts for solar energy storage

2020 ◽  
Vol 39 (1) ◽  
pp. 340-350
Author(s):  
Mingjing Wang ◽  
Song Zeng ◽  
Huihui Zhang ◽  
Ming Zhu ◽  
Chengxin Lei ◽  
...  
Keyword(s):  
Stainless Steel ◽  
Molten Salt ◽  
Electrochemical Impedance ◽  
Charge Transfer Resistance ◽  
Inconel 625 ◽  
Transfer Resistance ◽  
316 Stainless Steel ◽  
Corrosion Rates ◽  
Inconel 625 Alloy ◽  
Corrosion Behaviors

AbstractCorrosion behaviors of 316 stainless steel (316 ss) and Inconel 625 alloy in molten NaCl–KCl–ZnCl2 at 700°C and 900°C were investigated by immersion tests and electrochemical methods, including potentiodynamic polarization and electrochemical impedance spectroscopy. X-ray diffraction and scanning electron microscopy/energy dispersive spectroscopy were used to analyze the phases and microstructures of the corrosion products. Inconel 625 alloy and 316 ss exhibited high corrosion rates in molten chlorides, and the corrosion rates of these two alloys accelerated when the temperature increased from 700°C to 900°C. The results of the electrochemical tests showed that both alloys exhibited active corrosion in chloride molten salt, and the current density of 316 ss in chloride molten salt at 700°C was 2.756 mA/cm−2, which is about three times the value for Inconel 625 alloy; and the values of the charge transfer resistance (Rt) for Inconel 625 were larger than those for 316 ss. The corrosion of these two alloys is owing to the preferred oxidation of Cr in chloride molten salt, and the corrosion layer was mainly ZnCr2O4 which was loose and porous and showed poor adherence to metal.

scholarly journals Combined Experimental and Theoretical Insights into the Corrosion Inhibition Activity on Carbon Steel Iron of Phosphonic Acids

Molecules ◽  
2020 ◽  
Vol 26 (1) ◽  
pp. 135
Author(s):  
Aurelia Visa ◽  
Nicoleta Plesu ◽  
Bianca Maranescu ◽  
Gheorghe Ilia ◽  
Ana Borota ◽  
...  
Keyword(s):  
Carbon Steel ◽  
Corrosion Inhibition ◽  
Density Functional ◽  
Energy Gap ◽  
Electrochemical Impedance ◽  
Charge Transfer Resistance ◽  
Phosphonic Acids ◽  
Transfer Resistance ◽  
Potential Map ◽  
Chlorine Ions

The inhibition effect of N,N′-phosphonomethylglycine (PMG) and vinyl phosphonic acid (VPA) on the 3% NaCl acidic solution corrosion of carbon steel iron was studied at different immersion times by potentiodynamic polarization, electrochemical impedance spectroscopy, attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy, and computational methods. It is found from the polarization studies that PMG and VPA behave as mixed-type inhibitors in NaCl. Values of charge transfer resistance (Rct) and double layer capacitance (Cdl) in the absence and presence of inhibitors are determined. The PMG and VPA inhibitors were capable of inhibiting the corrosion process up to ≈91% and ≈85%, respectively. In the presence of PMG, the synergic effect of chlorine ions was observed. Density functional theory (DFT) was engaged to establish the adsorption site of PMG, VPA, and their deprotonated states. For studied compounds, the resulted values of ELUMO, EHOMO, energy gap (∆E), dipole moment (μ), electronic hardness (η), global softness (σ), electrophilic index (ω), and the electronic potential map are in concordance with the experimental data results regarding their corrosion inhibition behavior and adsorption on the metal surface.

Corrosion Inhibition of N,N- diethylammonium O,O′- di (p-chlorophenyl) dithiophosphate for Carbon Steel in HCL Solution

2013 ◽  
Vol 781-784 ◽  
pp. 299-303
Author(s):  
Shu Lan Cai ◽  
Kang Quan Qiao ◽  
Fa Mei Feng
Keyword(s):  
Electrochemical Impedance Spectroscopy ◽  
Carbon Steel ◽  
Corrosion Inhibition ◽  
Mixed Type ◽  
Electrochemical Impedance ◽  
Equivalent Circuit Model ◽  
Inhibition Effect ◽  
Inhibition Process ◽  
Hcl Solution ◽  
Mixed Type Inhibitor

A new corrosion inhibior N,N-diethylammonium O,O-di (p-chlorophenyl) dithiophosphate (EDPDP) has been synthesized and its inhibition effect towards the corrosion of carbon steel in 1.0 molL-1 HCl solution at 25 °C has been investigated by potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) methods. The obtained results show that EDPDP is a excellent inhibitor and the inhibition efficiencies exceed 90 %. The polarization measurements reveal that EDPDP is a mixed type inhibitor and the equivalent circuit model of the corrosion inhibition process is obtained by the analysis of EIS data.

scholarly journals Protection of Petroleum Pipeline Carbon Steel Alloys with New Modified Core-Shell Magnetite Nanogel against Corrosion in Acidic Medium

2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
Gamal A. El Mahdy ◽  
Ayman M. Atta ◽  
Amro K. F. Dyab ◽  
Hamad A. Al-Lohedan
Keyword(s):  
Carbon Steel ◽  
Sulfonic Acid ◽  
Electrochemical Impedance ◽  
Electrochemical Techniques ◽  
Core Shell ◽  
Magnetite Nanoparticle ◽  
Potassium Peroxydisulfate ◽  
Redox Initiator ◽  
Initiator System ◽  
First Time

New method was used to prepare magnetite nanoparticle based on reduction of Fe(III) ions with potassium iodide to produce Fe3O4nanoparticle. The prepared magnetite was stabilized with cross-linked polymer based on 2-acrylamido-2-methylpropane sulfonic acid (AMPS to prepare novel core-shell nanogel. In this respect, Fe3O4/poly(2-acrylamido-2-methylpropane sulfonic acid) (PAMPS) magnetic nanogels with controllable particle size produced via free aqueous polymerization at 65°C have been developed for the first time. The polymer was crosslinked in the presence of N,N-methylenebisacrylamide (MBA) as a crosslinker and potassium peroxydisulfate (KPS) as redox initiator system. The structure and morphology of the magnetic nanogel were characterized by Fourier transform infrared spectroscopy (FTIR) and transmission and scanning electron microscopy (TEM and SEM). The effectiveness of the synthesized compounds as corrosion inhibitors for carbon steel in 1 M HCl was investigated by various electrochemical techniques such as potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). The results showed enhancement in inhibition efficiencies with increasing the inhibitor concentrations. The results showed that the nanogel particles act as mixed inhibitors. EIS data revealed thatRctincreases with increasing inhibitor concentration.

Investigation of corrosion inhibition of C38 steel in 5.5 M H3PO4 solution using Ziziphus lotus oil extract: an application model

2019 ◽  
Vol 66 (1) ◽  
pp. 121-126 ◽  
Author(s):  
Walid Belmaghraoui ◽  
Aimad Mazkour ◽  
Hicham Harhar ◽  
Mourad Harir ◽  
Souad El Hajjaji
Keyword(s):  
Carbon Steel ◽  
Corrosion Inhibition ◽  
Inhibition Efficiency ◽  
Electrochemical Impedance ◽  
Electric Circuit ◽  
Oil Composition ◽  
Content Type ◽  
Tafel Polarization ◽  
Chemical Content ◽  
Oil Extract

Purpose This study aims to investigate the corrosion inhibition effect of extracted oil from Ziziphus lotus fruit on corrosion of C38 carbon steel in 5.5 M H3PO4 solution using potentiodynamic polarization and impedance techniques. Design/methodology/approach Oil composition was determined using gas chromatography, and the results showed that oleic and palmitic acids present approximately 84.0 per cent of its total chemical content. Electrochemical impedance spectroscopy (EIS) data were analyzed by adapting it to a well-developed electric circuit model. The inhibition efficiency of Z. lotus oil was calculated and compared using Tafel polarization and EIS. Findings Accordingly, the oil extract was found to act as an anodic type inhibitor. Furthermore, inhibition efficiency of Z. lotus oil extract increase with oil concentrations and achieve approximately 70.5 per cent at 3 g/L solution of Z. lotus oil. Originality/value The results obtained from different tested methods were in line, and the oil was able to reduce significantly the kinetics of the corrosion process of C38 carbon steel.

Sign in / Sign up

Export Citation Format

Share Document