scholarly journals Effects of tip speed ratio on the performance of an H-Darriues wind turbine with NACA 4415 air foil

2020 ◽  
Author(s):  
Yogie P. Sibagariang ◽  
Indro Pramono ◽  
Koki Kishinami ◽  
Himsar Ambarita
Keyword(s):  
Wind Turbine ◽  
Speed Ratio ◽  
Tip Speed Ratio

scholarly journals Performance assessment and optimization of a helical Savonius wind turbine by modifying the Bach’s section

2021 ◽  
Vol 3 (8) ◽  
Author(s):  
M. Niyat Zadeh ◽  
M. Pourfallah ◽  
S. Safari Sabet ◽  
M. Gholinia ◽  
S. Mouloodi ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Performance Assessment ◽  
Turbulent Flows ◽  
Power Coefficient ◽  
Speed Ratio ◽  
Tip Speed Ratio ◽  
Basic Model ◽  
Turbine Performance ◽  
Primary Model ◽  
Savonius Wind Turbine

AbstractIn this paper, we attempted to measure the effect of Bach’s section, which presents a high-power coefficient in the standard Savonius model, on the performance of the helical Savonius wind turbine, by observing the parameters affecting turbine performance. Assessment methods based on the tip speed ratio, torque variation, flow field characterizations, and the power coefficient are performed. The present issue was stimulated using the turbulence model SST (k- ω) at 6, 8, and 10 m/s wind flow velocities via COMSOL software. Numerical simulation was validated employing previous articles. Outputs demonstrate that Bach-primary and Bach-developed wind turbine models have less flow separation at the spoke-end than the simple helical Savonius model, ultimately improving wind turbines’ total performance and reducing spoke-dynamic loads. Compared with the basic model, the Bach-developed model shows an 18.3% performance improvement in the maximum power coefficient. Bach’s primary model also offers a 12.4% increase in power production than the initial model’s best performance. Furthermore, the results indicate that changing the geometric parameters of the Bach model at high velocities (in turbulent flows) does not significantly affect improving performance.

Numerical Research on the Characteristics of Lift-Drag Type Vertical Axis Wind Turbine

2012 ◽  
Vol 189 ◽  
pp. 448-452
Author(s):  
Yan Jun Chen ◽  
Guo Qing Wu ◽  
Yang Cao ◽  
Dian Gui Huang ◽  
Qin Wang ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Vertical Axis ◽  
Chord Length ◽  
Power Coefficient ◽  
Speed Ratio ◽  
Vertical Axis Wind Turbine ◽  
Tip Speed Ratio ◽  
Middle Range ◽  
Parabolic Form ◽  
Cfd Method

Numerical studies are conducted to research the performance of a kind of lift-drag type vertical axis wind turbine (VAWT) affected by solidity with the CFD method. Moving mesh technique is used to construct the model. The Spalart-Allmaras one equation turbulent model and the implicit coupled algorithm based on pressure are selected to solve the transient equations. In this research, how the tip speed ratio and the solidity of blade affect the power coefficient (Cp) of the small H-VAWT is analyzed. The results indicate that Cp curves exhibit approximate parabolic form with its maximum in the middle range of tip speed ratio. The two-blade wind turbine has the lowest Cp while the three-blade one is more powerful and the four-blade one brings the highest power. With the certain number of blades, there is a best chord length, and too long or too short chord length may reduce the Cp.

scholarly journals Kontrol Angle of Attack untuk Optimasi Daya padaVertical Axis Wind Turbine Tipe Darrieus

2020 ◽  
Vol 8 (3) ◽  
pp. 492
Author(s):  
WAHYU AULIA NURWICAKSANA ◽  
BUDHY SETIAWAN ◽  
IKA NOER SYAMSIANA ◽  
SEPTYANA RISKITASARI
Keyword(s):  
Wind Turbine ◽  
Angle Of Attack ◽  
Vertical Axis ◽  
Speed Ratio ◽  
Trial And Error ◽  
Proportional Integral Derivative ◽  
Vertical Axis Wind Turbine ◽  
Average Efficiency ◽  
Proportional Integral ◽  
Tip Speed Ratio

ABSTRAKVAWT (Vertical Axis Wind Turbine) tipe Darrieus NACA0015 merupakan salah satu model dari turbin angin yang bekerja dengan menggunakan angin sebagai sumber penggerak. Namun dari hasil pengamatan, kecepatan angin yang ada tidak konstan setiap saat. Sehingga dari permasalahan ini perlu suatu kontrol yaitu dengan mengendalikan sudut kerja blade VAWT yang dikenal dengan kontrol angle of attack (AoA). Prinsip kerja kontrol AoA yaitu sudut blade diatur agar VAWT bekerja secara optimum dan dapat meningkatkan efisiensi. Metode kontrol AoA menggunakan PID (Proportional–Integral–Derivative) dengan memberikan nilai trial and error pada Kp, Ki, Kd. VAWT ini menggunakan konstanta TSR (Tip Speed Ratio) yaitu 4. Hasil dari penelitian ini yaitu daya yang dihasilkan VAWT dengan kontrol AoA mendapatkan rata-rata efisiensi sebesar 5.16%, sedangkan VAWT tanpa kontrol mendapatkan efisiensi sebesar 3.49%. Sehingga dapat disimpulkan bahwa dengan kontrol AoA, rata-rata efisiensi dayanya naik sebesar 1.67% dari yang tanpa kontrol.Kata Kunci: Kontrol Angle of Attack (AoA), VAWT, TSR, Efisiensi ABSTRACTVAWT (Vertical Axis Wind Turbine) type Darrieus NACA0015 is one model of a wind turbine that works by using wind as a source of propulsion. Conditions from observations, wind speeds that are not constant every time. So from this problem needs control VAWT by controlling the working angle of the VAWT blade is the angle of attack control (AoA). The principle AoA control is that the blade angle adjusted so that the VAWT works optimally and can improve the efficiency. AoA control method uses PID (Proportional-Integral-Derivative) by providing trial and error values for Kp, Ki, Kd. VAWT uses TSR (Tip Speed Ratio) constant which is 4. The results of this research, VAWT with AoA control get an average efficiency of 5.16%, while without control gets an average efficiency of 3.49%. So it can be concluded that with AoA control, the average power efficiency increases by 1.67% from those without control.Keywords: Angle of Attack (AoA) Control, VAWT, TSR, Efficiency

scholarly journals 361 Savonius wind turbine with wind concentrator : In case of tip speed ratio>1.0

2005 ◽  
Vol 2005 (0) ◽  
pp. 83-84
Author(s):  
Sheng Zhang ◽  
Takayuki Yaginuma ◽  
Masahiro Mino ◽  
Hiroyuki Ueno ◽  
Susumu Ishii
Keyword(s):  
Wind Turbine ◽  
Speed Ratio ◽  
Tip Speed Ratio ◽  
Savonius Wind Turbine

scholarly journals Attempt to quantify the impact of seasonal air density variation on operating tip-speed ratio of small wind turbines

2021 ◽  
Vol 2090 (1) ◽  
pp. 012144
Author(s):  
Hiroki Suzuki ◽  
Yutaka Hasegawa ◽  
O.D. Afolabi Oluwasola ◽  
Shinsuke Mochizuki
Keyword(s):  
Wind Turbine ◽  
Wind Velocity ◽  
Governing Equation ◽  
Rotational Speed ◽  
Speed Ratio ◽  
Tip Speed Ratio ◽  
Air Density ◽  
Small Wind Turbines ◽  
The Impact ◽  
Aerodynamic Torque

Abstract This study presents the impact of seasonal variation in air density on the operating tip-speed ratio of small wind turbines. The air density, which varies depending on the temperature, atmospheric pressure, and relative humidity, has an annual amplitude of about 5% in Tokyo, Japan. This study quantified this impact using the rotational speed equation of motion in a small wind turbine informed by previous work. This governing equation has been simplified by expanding the aerodynamic torque coefficient profile for a wind turbine rotor to the tip-speed ratio. Furthermore, this governing equation is simplified by using nondimensional forms of the air density, inflow wind velocity, and rotational speed with their characteristic values. In this study, the generator’s load is set to be constant based on a previous analysis of a small wind turbine. By considering the equilibrium between the aerodynamic torque and the load torque of the governing equation at the optimum tip-speed ratio, the impact of the variation in the air density on the operating tip-speed ratio was expressed using a simple mathematical form. As shown in this derived form, the operating tip-speed ratio was found to be less sensitive to a variation in air density than that in inflow wind velocity.

Optimization of a Vertical Axis Micro Wind Turbine for Low Tip Speed Ratio Operation

2012 ◽  
Author(s):  
Akshay Pendharkar ◽  
Ryan McGowan ◽  
Kevin Morillas ◽  
Mark Pinder ◽  
Narayanan Komerath
Keyword(s):  
Wind Turbine ◽  
Vertical Axis ◽  
Speed Ratio ◽  
Tip Speed Ratio

Savonius Wind Turbine Performances on Wind Concentrator

2017 ◽  
Vol 8 (1) ◽  
pp. 376
Author(s):  
Dygku. Asmanissa Awg. Osman ◽  
Norzanah Rosmin ◽  
Nor Shahida Hasan ◽  
Baharruddin Ishak ◽  
Aede Hatib Mustaamal@Jamal ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Electrical Power ◽  
Vertical Axis ◽  
Angular Speed ◽  
Speed Ratio ◽  
Vertical Axis Wind Turbine ◽  
Air Compressor ◽  
Tip Speed Ratio ◽  
Savonius Wind Turbine ◽  
Air Streams

The air streams from the outlet of an air compressor can be used to generate electricity. For instance, if a micro-sized Vertical-Axis Wind-Turbine (VAWT) is installed towards the airflow, some amount of electricity can be generated before being stored in a battery bank. The research’s objectives are to design, fabricate and analyze the performance of Helical Savonius VAWT blade rotors, which is tested with and without using a wind concentrator. The Helical Savonius VAWT is tested at 0 cm without the concentrator, whereas the blade rotor is tested at concave-blade position when using the concentrator. The blade and the wind concentrator designs were based on the dimensions and the constant airflow of the air compressor. The findings suggested that the blade produced its best performance when tested using wind concentrator at concave-blade position in terms of angular speed (<em>ω</em>), tip speed ratio (<em>TSR</em>) and the generated electrical power (<em>P</em><em><sub>E</sub></em>). The findings concluded that the addition of wind concentrator increases the airflow which then provided better performances on the blades.

Experimental and Numerical Assessment of Cross Flow Vertical Axis Wind Turbine

2019 ◽  
Author(s):  
Sivamani Seralathan ◽  
Micha Premkumar Thomai ◽  
Rian Leevinson Jayakumar ◽  
Basireddy Venkata Lokesh Reddy ◽  
Hariram Venkatesan
Keyword(s):  
Wind Turbine ◽  
Renewable Energy Sources ◽  
Cross Flow ◽  
Experimental Investigations ◽  
Speed Ratio ◽  
Positive Interaction ◽  
Polar Plot ◽  
Tip Speed Ratio ◽  
Wind Speeds ◽  
Low Wind Speeds

Abstract Due to increase in energy demand along with environmental awareness, the attention is shifting towards renewable energy sources. A wind turbine developed from Banki water turbine is used in this study as it starts at low-wind speeds and has high starting torque. Experimental investigations are carried out on a test rig equipped with open jet wind tunnel with wind velocity varying from 7 to 11 m/s. Later, 3D steady-state numerical analyses are performed using ANSYS CFX for better understanding of the flow physics of cross flow VAWT. The experimental investigations revealed that cross flow VAWT has a good self-starting ability at relatively low-wind speeds. A peak power coefficient (Cp, max) value of 0.059 is observed for the tip speed ratio (λ) of 0.30. As the tip speed ratio is raised further, the Cp value is observed to decrease gradually. The numerical simulations reveal the reason for the drop in Cp value. This is due to lessening of positive interaction between the flow and cross flow VAWT blades at higher λ due to vortex formation. The torque coefficient is found to decrease almost linearly from a peak value of around 0.49 at λ = 0 to a value of 0 around λ = 0.60. Polar plot between angle and torque shows that torque output of the turbine is nearly same in all directions which reinforce the potency of cross flow VAWT to be omni-directional as it produces the same performance regardless of wind directions.

Numerical evaluation of optimum tip speed ratio for darrieus type vertical axis wind turbine

2020 ◽  
Vol 33 ◽  
pp. 4719-4722
Author(s):  
E. Leelakrishnan ◽  
M. Sunil Kumar ◽  
S. David Selvaraj ◽  
N. Sundara Vignesh ◽  
T.S. Abhesheka Raja
Keyword(s):  
Wind Turbine ◽  
Numerical Evaluation ◽  
Vertical Axis ◽  
Speed Ratio ◽  
Vertical Axis Wind Turbine ◽  
Tip Speed Ratio

The Rotor Speed Control of 5MW Wind Turbine under Rated Wind Speed Using Adaptive-PID Controller

2012 ◽  
Vol 229-231 ◽  
pp. 2323-2326
Author(s):  
Zong Qi Tan ◽  
Can Can Li ◽  
Hui Jun Ye ◽  
Yu Qiong Zhou ◽  
Hua Ling Zhu
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Pid Controller ◽  
Turbine Rotor ◽  
Speed Ratio ◽  
Rotor Speed ◽  
Rotating Speed ◽  
Tip Speed Ratio ◽  
Variable Wind ◽  
Wind Turbine Rotor

This paper designed the controller of the wind turbine rotor rotating speed. This model of adaptive-PID through control the tip-speed ratio and count the values of PID for variable wind speed. From the result of simulation, the wind speed can run in a good dynamic characteristic, and keep the rotor running in the best tip-speed ratio at the same time.

Sign in / Sign up

Export Citation Format

Share Document