Creep stresses in functionally graded thin rotating orthotropic disk with exponentially variable thickness and density

2020 ◽  
Author(s):  
Kajol Maheshwari ◽  
Sanjeev Sharma
Keyword(s):  
Variable Thickness ◽  
Functionally Graded ◽  
Orthotropic Disk

Exact solution for free vibration analysis of linearly varying thickness FGM plate using Galerkin-Vlasov’s method

2020 ◽  
pp. 146442072098049
Author(s):  
V Kumar ◽  
SJ Singh ◽  
VH Saran ◽  
SP Harsha
Keyword(s):  
Free Vibration ◽  
Variable Thickness ◽  
Vibration Analysis ◽  
Shear Deformation Theory ◽  
Free Vibration Analysis ◽  
Functionally Graded ◽  
Constant Thickness ◽  
Engineering Structures ◽  
Property Variation ◽  
Varying Thickness

The present paper investigates the free vibration analysis for functionally graded material plates of linearly varying thickness. A non-polynomial higher order shear deformation theory is used, which is based on inverse hyperbolic shape function for the tapered FGM plate. Three different types of material gradation laws, specifically: a power (P-FGM), exponential (E-FGM), and sigmoid law (S-FGM) are used to calculate the property variation in the thickness direction of FGM plate. The variational principle has been applied to derive the governing differential equation for the plates. Non-dimensional frequencies have been evaluated by considering the semi-analytical approach viz. Galerkin-Vlasov’s method. The accuracy of the preceding formulation has been validated through numerical examples consisting of constant thickness and tapered (variable thickness) plates. The findings obtained by this method are found to be in close agreement with the published results. Parametric studies are then explored for different geometric parameters like taper ratio and boundary conditions. It is deduced that the frequency parameter is maximum for S-FGM tapered plate as compared to E- and P-FGM tapered plate. Consequently, it is concluded that the S-FGM tapered plate is suitable for those engineering structures that are subjected to huge excitations to avoid resonance conditions. In addition, it is found that the taper ratio is significantly affected by the type of constraints on the edges of the tapered FGM plate. Some novel results for FGM plate with variable thickness are also computed that can be used as benchmark results for future reference.

scholarly journals An edge-based smoothed finite element for buckling analysis of functionally graded material variable-thickness plates

2021 ◽  
Author(s):  
Tran Trung Thanh ◽  
Tran Van Ke ◽  
Pham Quoc Hoa ◽  
Tran The Van ◽  
Nguyen Thoi Trung
Keyword(s):  
Finite Element ◽  
Variable Thickness ◽  
Buckling Analysis ◽  
Functionally Graded ◽  
Triangular Element ◽  
Stiffness Matrices ◽  
Strain Smoothing ◽  
Graded Material ◽  
Smoothed Finite Element Method ◽  
Edge Based

The paper aims to extend the ES-MITC3 element, which is an integration of the edge-based smoothed finite element method (ES-FEM) with the mixed interpolation of tensorial components technique for the three-node triangular element (MITC3 element), for the buckling analysis of the FGM variable-thickness plates subjected to mechanical loads. The proposed ES-MITC3 element is performed to eliminate the shear locking phenomenon and to enhance the accuracy of the existing MITC3 element. In the ES-MITC3 element, the stiffness matrices are obtained by using the strain smoothing technique over the smoothing domains formed by two adjacent MITC3 triangular elements sharing the same edge. The numerical results demonstrated that the proposed method is reliable and more accurate than some other published solutions in the literature. The influences of some geometric parameters, material properties on the stability of FGM variable-thickness plates are examined in detail.

Sign in / Sign up

Export Citation Format

Share Document