scholarly journals Improvement of carbon steel resistance against high temperature oxidation and corrosion by flame sprayed FeCrAlTiY-30 mass% CoNiCrAlY coating using N2 pressure

2020 ◽  
Author(s):  
Dedi Holden Simbolon ◽  
Januaris Pane ◽  
Bambang Hermanto ◽  
Marhaposan Situmorang ◽  
Kerista Sebayang ◽  
...  
2020 ◽  
Author(s):  
Januaris Pane ◽  
Dedi Holden Simbolon ◽  
Bambang Hermanto ◽  
Kerista Sebayang ◽  
Marhaposan Situmorang ◽  
...  

2011 ◽  
Vol 686 ◽  
pp. 569-573 ◽  
Author(s):  
Ming Feng Tan ◽  
Wan Chang Sun ◽  
Lei Zhang ◽  
Quan Zhou ◽  
Jin Ding

Electroless Ni-P coating containing ZrO2particles was successfully co-deposited on low carbon steel substrate. The surface and cross-sectional micrographs of the composite coatings were observed with scanning electron microscopy (SEM). And the chemical composition of the coating was analyzed with energy dispersive spectroscopy (EDS). The oxidation resistance was evaluated by weight gains during high temperature oxidation test. The results showed that the embedded ZrO2particles with irregular shape uniformly distributed in the entire Ni-P matrix, and the coating showed a good adhesion to the substrate. The weight gain curves of Ni-P-ZrO2composite coatings and Ni-P coating at 923K oxidation experiments were in accordance with . The ZrO2particles in Ni-P matrix could significantly enhance the high temperature oxidation resistance of the carbon steel substrate as compared to pure Ni-P coating.


2011 ◽  
Vol 189-193 ◽  
pp. 186-192 ◽  
Author(s):  
Guo Liang Li ◽  
Xiao Hua Jie ◽  
Ling He

Multi-component metal ceramic coating(Ti, Al)C was prepared on the 0.45% carbon steel by electrical discharge coating (EDC) in a hydrocarbon medium. The coating of the samples before and after oxidation was analyzed by different methods including X-ray diffraction (XRD), scanning electron spectroscopy (SEM) and energy disperse spectroscopy (EDS).The thermogravimetric technique was used to approximate the kinetics of oxidation of the coated and the uncoated samples.The results indicated that the thickness of the coating was about 20μm, and the composition of the ceramic coating mainly consisted of (Ti, Al) C and a little Ti3AlC. An oxide film with compact structure formed after 600°C oxidation for 200h, and it was mainly composed of Al2O3and TiO2, which inhibited further oxygen diffusion into the coating. The (Ti, Al) C ceramic coating possessed slow oxidation rate and high temperature oxidation resistance.


2020 ◽  
Vol 6 (12) ◽  
pp. 1265b7
Author(s):  
Xiaojing Xu ◽  
Yangguang Liu ◽  
Vitus Tabie ◽  
Song Yang ◽  
Chengbin Cai ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document