Comparison of local gasoline fuel characteristics and SI engine performance with commercial fuel additives

2020 ◽  
Author(s):  
Ali Shukur Hadi ◽  
Omer Khalil Ahmed ◽  
Obed Majeed Ali
Keyword(s):  
Engine Performance ◽  
Fuel Additives ◽  
Si Engine ◽  
Fuel Characteristics ◽  
Commercial Fuel

Analysis of Variable Intake Runner Lengths and Intake Valve Open Timings on Engine Performances

2014 ◽  
Vol 663 ◽  
pp. 336-341 ◽  
Author(s):  
Mohd Farid Muhamad Said ◽  
Zulkarnain Abdul Latiff ◽  
Aminuddin Saat ◽  
Mazlan Said ◽  
Shaiful Fadzil Zainal Abidin
Keyword(s):  
Engine Performance ◽  
Intake Manifold ◽  
Intake Valve ◽  
Si Engine ◽  
Engine Simulation ◽  
Engine Model ◽  
Optimum Parameters ◽  
Comparison Results ◽  
Variable Valve ◽  
Engine Development

In this paper, engine simulation tool is used to investigate the effect of variable intake manifold and variable valve timing technologies on the engine performance at full load engine conditions. Here, an engine model of 1.6 litre four cylinders, four stroke spark ignition (SI) engine is constructed using GT-Power software to represent the real engine conditions. This constructed model is then correlated to the experimental data to make sure the accuracy of this model. The comparison results of volumetric efficiency (VE), intake manifold air pressure (MAP), exhaust manifold back pressure (BckPress) and brake specific fuel consumption (BSFC) show very well agreement with the differences of less than 4%. Then this correlated model is used to predict the engine performance at various intake runner lengths (IRL) and various intake valve open (IVO) timings. Design of experiment and optimisation tool are applied to obtain optimum parameters. Here, several configurations of IRL and IVO timing are proposed to give several options during the engine development work. A significant improvement is found at configuration of variable IVO timing and variable IRL compared to fixed IVO timing and fixed IRL.

scholarly journals Review of Performance and Emmissions Characteristics of Bio-Additive Fuel on SI Engine Fuelled by Biopetrol

2015 ◽  
Vol 773-774 ◽  
pp. 430-434
Author(s):  
Azizul Mokhtar ◽  
Nazrul Atan ◽  
Najib Rahman ◽  
Amir Khalid
Keyword(s):  
Fuel Economy ◽  
Fossil Fuels ◽  
Review Paper ◽  
Engine Performance ◽  
Exhaust Emissions ◽  
Spark Ignition Engine ◽  
Si Engine ◽  
New Approach ◽  
Performance And Emission ◽  
Performance And Emissions

Bio-additive is biodegradable and produces less air pollution thus significant for replacing the limited fossil fuels and reducing threats to the environment from exhaust emissions and global warming. Instead, the bio-additives can remarkably improve the fuel economy SI engine while operating on all kinds of fuel. Some of the bio-additive has the ability to reduce the total CO2 emission from internal petrol engine. This review paper focuses to determine a new approach in potential of bio-additives blends operating with bio-petrol on performance and emissions of spark ignition engine. It is shown that the variant in bio-additives blending ratio and engine operational condition are reduced engine-out emissions and increased efficiency. It seems that the bio-additives can increase the maximum cylinder combustion pressure, improve exhaust emissions and largely reduce the friction coefficient. The review concludes that the additives usage in bio-petrol is inseparable for the better engine performance and emission control and further research is needed to develop bio-petrol specific additives.

scholarly journals THE RESEARCH INTO THE INFLUENCE OF ECOLOGICAL PETROL ADDITIVES IN THE AUTOMOBILE LABORATORY

Transport ◽  
2004 ◽  
Vol 19 (1) ◽  
pp. 24-27 ◽  
Author(s):  
Algis Butkus ◽  
Saugirdas Pukalskas
Keyword(s):  
Engine Performance ◽  
Positive Influence ◽  
Pollutant Emission ◽  
Exhaust Emission ◽  
Chassis Dynamometer ◽  
Si Engine ◽  
Fuel Blend ◽  
Octane Rating ◽  
Reduce Emissions ◽  
The Eu

Looking forward to Lithuania becoming a member of the EU it is very important to use a larger amount of renewing fuel. Based on economic and environmental considerations in Lithuania, we are interested in studying the effects of ethanol contents in the blended ethanol‐petrol fuel on the engine performance and pollutant emission of SI engine. Therefore, we used engine test facilities to investigate the effects on the engine performance and pollutant emission of 3,5 % and 7,0 % ethanol in the fuel blend and special additives, which reduce emissions and increase octane rating. The tests were carried out in the laboratory on a chassis dynamometer with two different cars. The experiment results showed that ethanol used in a fuel blend with petrol had a positive influence on engine performance and exhaust emission.

scholarly journals Experimental Comparative Study on Performance and Emissions of E85 Adopting Different Injection Approaches in a Turbocharged PFI SI Engine

Energies ◽  
2019 ◽  
Vol 12 (8) ◽  
pp. 1555 ◽  
Author(s):  
Cinzia Tornatore ◽  
Luca Marchitto ◽  
Maria Antonietta Costagliola ◽  
Gerardo Valentino
Keyword(s):  
Fuel Injection ◽  
Reference Conditions ◽  
Engine Performance ◽  
Exhaust Emissions ◽  
Intake Manifold ◽  
Si Engine ◽  
Spark Timing ◽  
Performance And Emissions ◽  
Ethanol Blends ◽  
Cylinder Port

This study examines the effects of ethanol and gasoline injection mode on the combustion performance and exhaust emissions of a twin cylinder port fuel injection (PFI) spark ignition (SI) engine. Generally, when using gasoline–ethanol blends, alcohol and gasoline are externally mixed with a specified blending ratio. In this activity, ethanol and gasoline were supplied into the intake manifold into two different ways: through two separated low pressure fuel injection systems (Dual-Fuel, DF) and in a blend (mix). The ratio between ethanol and gasoline was fixed at 0.85 by volume (E85). The initial reference conditions were set running the engine with full gasoline at the knock limited spark advance boundary, according to the standard engine calibration. Then E85 was injected and a spark timing sweep was carried out at rich, stoichiometric, and lean conditions. Engine performance and gaseous and particle exhaust emissions were measured. Adding ethanol could remove over-fueling with an increase in thermal efficiency without engine load penalties. Both ethanol and charge leaning resulted in a lowering of CO, HC, and PN emissions. DF injection promoted a faster evaporation of gasoline than in blend, shortening the combustion duration with a slight increase in THC and PN emissions compared to the mix mode.

Sign in / Sign up

Export Citation Format

Share Document