Low‐frequency dielectric properties of Co‐Al2O3composite films

1987 ◽  
Vol 50 (14) ◽  
pp. 937-939 ◽  
Author(s):  
G. A. Niklasson ◽  
K. Brantervik
Keyword(s):  
Dielectric Properties ◽  
Low Frequency

Low-Frequency Dielectric Properties of Acenaphtene

1993 ◽  
Vol 229 (1) ◽  
pp. 221-223
Author(s):  
B. Kucharska ◽  
J. Michalski ◽  
A. Szymaǹski ◽  
J. [sgrave]viatek
Keyword(s):  
Dielectric Properties ◽  
Low Frequency

scholarly journals Polytetrafluoroethylene Films in Rigid Polyurethane Foams’ Dielectric Permittivity Measurements with a One-Side Access Capacitive Sensor

Polymers ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1173
Author(s):  
Ilze Beverte ◽  
Ugis Cabulis ◽  
Sergejs Gaidukovs
Keyword(s):  
Dielectric Properties ◽  
Dielectric Permittivity ◽  
Low Frequency ◽  
Capacitive Sensor ◽  
Polyurethane Foams ◽  
Active Area ◽  
Ptfe Film ◽  
Practical Applications ◽  
Permittivity Measurements ◽  
The Impact

As a non-metallic composite material, widely applied in industry, rigid polyurethane (PUR) foams require knowledge of their dielectric properties. In experimental determination of PUR foams’ dielectric properties protection of one-side capacitive sensor’s active area from adverse effects caused by the PUR foams’ test objects has to be ensured. In the given study, the impact of polytetrafluoroethylene (PTFE) films, thickness 0.20 mm and 0.04 mm, in covering or simulated coating the active area of one-side access capacitive sensor’ electrodes on the experimentally determined true dielectric permittivity spectra of rigid PUR foams is estimated. Penetration depth of the low frequency excitation field into PTFE and PUR foams is determined experimentally. Experiments are made in order to evaluate the difference between measurements on single PUR foams’ samples and on complex samples “PUR foams + PTFE film” with two calibration modes. A modification factor and a small modification criterion are defined and values of modifications are estimated in numerical calculations. Conclusions about possible practical applications of PTFE films in dielectric permittivity measurements of rigid PUR foams with one-side access capacitive sensor are made.

Interaction of Point Defects in Ice

1978 ◽  
Vol 21 (85) ◽  
pp. 115-122
Author(s):  
J. H. Bilgram ◽  
H. Gränicher
Keyword(s):  
Experimental Data ◽  
Dielectric Properties ◽  
Temperature Dependence ◽  
Point Defects ◽  
Low Frequency ◽  
Defect Concentration ◽  
Dielectric Measurements ◽  
Long Time ◽  
Nmr Techniques ◽  
Bjerrum Defect

AbstractThe interaction of point detects in ice has been neglected for a long time. Experimental data obtained from dielectric measurements on HF-doped crystals stimulated a new evaluation of the possibility of an interaction between Bjerrum defects and ions. In a previous paper it has been shown that this leads us to assume the existence of aggregates of Bjerrum defects and ions. In this paper these aggregates and Bjerrum defects are used to explain the dielectric properties of ice, especially the temperature dependence of the product of the high and low frequency conductivity σ0σ∞.The interaction of Bjerrum defects and impurity molecules leads to a dependence of the concentration of frenkel pairs on Bjerrum-defect concentration. At HF concentrations above the native Bjerrum-defect concentration the formation of a Frenkel pair is enhanced. This leads to the fast out-diffusion which has been studied in highly doped crystals by means of NMR techniques.

scholarly journals Computation of currents induced by ELF electric fields in anisotropic human tissues using the Finite Integration Technique (FIT)

2005 ◽  
Vol 3 ◽  
pp. 227-231 ◽  
Author(s):  
V. C. Motrescu ◽  
U. van Rienen
Keyword(s):  
Dielectric Properties ◽  
Electromagnetic Fields ◽  
Electric Fields ◽  
Human Body ◽  
Low Frequency ◽  
Integration Technique ◽  
Human Body Model ◽  
Body Model ◽  
Finite Integration Technique ◽  
Muscle Tissues

Abstract. In the recent years, the task of estimating the currents induced within the human body by environmental electromagnetic fields has received increased attention from scientists around the world. While important progress was made in this direction, the unpredictable behaviour of living biological tissue made it difficult to quantify its reaction to electromagnetic fields and has kept the problem open. A successful alternative to the very difficult one of performing measurements is that of computing the fields within a human body model using numerical methods implemented in a software code. One of the difficulties is represented by the fact that some tissue types exhibit an anisotropic character with respect to their dielectric properties. Our work consists of computing currents induced by extremely low frequency (ELF) electric fields in anisotropic muscle tissues using in this respect, a human body model extended with muscle fibre orientations as well as an extended version of the Finite Integration Technique (FIT) able to compute fully anisotropic dielectric properties.

scholarly journals Influence of Erbium Doping on Dielectric Properties of Zinc Borotellurite Glass System

2016 ◽  
Vol 846 ◽  
pp. 161-171 ◽  
Author(s):  
Siti Shafinas Zulkefly ◽  
Halimah Mohamed Kamari ◽  
Muhammad Nor Azlan Abdul Azis ◽  
Wan Mohd Daud Wan Yusoff
Keyword(s):  
Dielectric Properties ◽  
Molar Volume ◽  
Structural Changes ◽  
Low Frequency ◽  
Interfacial Polarization ◽  
Xrd Analysis ◽  
Glass System ◽  
Response Measurement ◽  
Xrd Pattern ◽  
Higher Temperature

Glasses of the system {[ (TeO2)70 (B2O3)30]70 (ZnO)30}100-y (Er2O3)y containing different concentration of Er2O3 (ranging from 0 to 5 mol %) was prepared from melt-quenching technique. The structural changes were studied by XRD analysis and FTIR analysis. The XRD pattern shows the glasses are amorphous. The higher concentration of Er2O3, the more unit of TeO3 would transform to TeO4 and formation of B-O vibrational groups. The density and molar volume was obtained attribute to non-bridging oxygen (NBO) and are found the density and molar volume of the glass system are increasing. The densities range from 3630 kg/m3 to 3960 kg/m3. The dielectric constant ε’ and dielectric loss factor ε’’ which were characterized in the frequency range 10-2 – 106 Hz over temperature range 50°C – 200 °C, show a larger value at lower frequency and higher temperature (above 110°C ). The results of dielectric response measurement show that interfacial polarization at low frequency, and orientation polarization at intermediate and high frequency.Keywords: Dielectric properties; Activation Energy; Rare Earth; Polarization; Non-Bridging Oxygen;

Temperature Dependence on Dielectric Response of La0.7Ba0.3Mn0.4Ti0.6O3 Ceramic

2015 ◽  
Vol 1107 ◽  
pp. 45-52
Author(s):  
Aaliyawani Ezzerin Sinin ◽  
Walter Charles Primus ◽  
Abdul Halim Shaari ◽  
Zainal Abidin Talib ◽  
Sinin Hamdan
Keyword(s):  
Dielectric Properties ◽  
Temperature Dependence ◽  
Low Frequency ◽  
Sintered Sample ◽  
Solid State Reaction Method ◽  
X Ray Diffraction ◽  
Conventional Solid State Reaction ◽  
Low Frequencies ◽  
X Ray ◽  
Lcr Meter

Ceramic sample of La0.70Ba0.30Mn0.40Ti0.60O3 oxide has been prepared by the conventional solid-state reaction method. The sintered sample was characterized by using x-ray diffraction (XRD) and low frequency LCR meter. XRD result shows that the sample has a cubic structure with the existence of impurity phase. The dielectric properties of La0.70Ba0.30Mn0.40Ti0.60O3 measured from room temperature to 200°C shows that the dielectric permittivity is temperature dependence with strong dispersion at low frequencies. A circuit model based on the universal capacitor response function is also being used to represent the dielectric properties of the sample.

Comparative study of low frequency dielectric properties of Hexyloxybenzylidine hexylaniline and Heptyloxybenzylidine hexylaniline

2015 ◽  
Vol 90 (6) ◽  
pp. 679-686 ◽  
Author(s):  
K. N. Singh ◽  
B. Gogoi ◽  
R. Dubey ◽  
N. M. Singh ◽  
H. B. Sharma ◽  
...  
Keyword(s):  
Dielectric Properties ◽  
Comparative Study ◽  
Low Frequency
Sign in / Sign up

Export Citation Format

Share Document