Disturbance growth triggered by steady heating of a jet’s nozzle exit boundary layer

1995 ◽  
Vol 7 (10) ◽  
pp. 2304-2306 ◽  
Author(s):  
David Cornelius ◽  
Ganesh Raman
Keyword(s):  
Boundary Layer ◽  
Nozzle Exit ◽  
Exit Boundary ◽  
Disturbance Growth

Nozzle-Exit Boundary-Layer Effects on a Controlled Supersonic Jet

AIAA Journal ◽  
2015 ◽  
Vol 53 (7) ◽  
pp. 2027-2039 ◽  
Author(s):  
Rachelle L. Speth ◽  
Datta V. Gaitonde
Keyword(s):  
Boundary Layer ◽  
Nozzle Exit ◽  
Supersonic Jet ◽  
Exit Boundary

scholarly journals Influence of nozzle-exit boundary-layer conditions on the flow and acoustic fields of initially laminar jets

2010 ◽  
Vol 663 ◽  
pp. 507-538 ◽  
Author(s):  
C. BOGEY ◽  
C. BAILLY
Keyword(s):  
Boundary Layer ◽  
Shear Layer ◽  
Nozzle Exit ◽  
Initial Conditions ◽  
Frequency Noise ◽  
Noise Component ◽  
Potential Core ◽  
Velocity Fluctuations ◽  
Laminar Jets ◽  
Exit Boundary

Round jets originating from a pipe nozzle are computed by large-eddy simulations (LES) to investigate the effects of the nozzle-exit conditions on the flow and sound fields of initially laminar jets. The jets are at Mach number 0.9 and Reynolds number 105, and exhibit exit boundary layers characterized by Blasius velocity profiles, maximum root-mean-square (r.m.s.) axial velocity fluctuations between 0.2 and 1.9% of the jet velocity, and momentum thicknesses varying from 0.003 to 0.023 times the jet radius. The far-field noise is determined from the LES data on a cylindrical surface by solving the acoustic equations. Jets with a thinner boundary layer develop earlier but at a slower rate, yielding longer potential cores and lower centreline turbulent intensities. Adding random pressure disturbances of low magnitude in the nozzle also increases the potential core length and reduces peak r.m.s. radial velocity fluctuations in the shear layer. In all the jets, the shear-layer transition is dominated by vortex rolling-ups and pairings, which generate strong additional acoustic components, but also amplify the downstream-dominant low-frequency noise component when the exit boundary layer is thick. The introduction of inlet noise however results in weaker pairings, thus spectacularly reducing their contributions to the sound field. This high sensitivity to the initial conditions is in good agreement with experimental observations.

scholarly journals Importance of the nozzle-exit boundary-layer state in subsonic turbulent jets

2018 ◽  
Vol 851 ◽  
pp. 83-124 ◽  
Author(s):  
Guillaume A. Brès ◽  
Peter Jordan ◽  
Vincent Jaunet ◽  
Maxime Le Rallic ◽  
André V. G. Cavalieri ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Nozzle Exit ◽  
Adaptive Mesh Refinement ◽  
Adaptive Mesh ◽  
Turbulent Jets ◽  
Acoustic Energy ◽  
Frequency Noise ◽  
Mean Velocity ◽  
Radiated Noise ◽  
Exit Boundary

To investigate the effects of the nozzle-exit conditions on jet flow and sound fields, large-eddy simulations of an isothermal Mach 0.9 jet issued from a convergent-straight nozzle are performed at a diameter-based Reynolds number of $1\times 10^{6}$. The simulations feature near-wall adaptive mesh refinement, synthetic turbulence and wall modelling inside the nozzle. This leads to fully turbulent nozzle-exit boundary layers and results in significant improvements for the flow field and sound predictions compared with those obtained from the typical approach based on laminar flow in the nozzle. The far-field pressure spectra for the turbulent jet match companion experimental measurements, which use a boundary-layer trip to ensure a turbulent nozzle-exit boundary layer to within 0.5 dB for all relevant angles and frequencies. By contrast, the initially laminar jet results in greater high-frequency noise. For both initially laminar and turbulent jets, decomposition of the radiated noise into azimuthal Fourier modes is performed, and the results show similar azimuthal characteristics for the two jets. The axisymmetric mode is the dominant source of sound at the peak radiation angles and frequencies. The first three azimuthal modes recover more than 97 % of the total acoustic energy at these angles and more than 65 % (i.e. error less than 2 dB) for all angles. For the main azimuthal modes, linear stability analysis of the near-nozzle mean-velocity profiles is conducted in both jets. The analysis suggests that the differences in radiated noise between the initially laminar and turbulent jets are related to the differences in growth rate of the Kelvin–Helmholtz mode in the near-nozzle region.

Effects of nozzle exit boundary-layer conditions on excitability of heated free jets

AIAA Journal ◽  
1989 ◽  
Vol 27 (6) ◽  
pp. 712-718 ◽  
Author(s):  
J. Lepicovsky ◽  
W. H. Brown
Keyword(s):  
Boundary Layer ◽  
Nozzle Exit ◽  
Free Jets ◽  
Exit Boundary

scholarly journals Effects of nozzle-exit boundary-layer profile on the initial shear-layer instability, flow field and noise of subsonic jets

2019 ◽  
Vol 876 ◽  
pp. 288-325 ◽  
Author(s):  
Christophe Bogey ◽  
Roberto Sabatini
Keyword(s):  
Boundary Layer ◽  
Velocity Profile ◽  
Shear Layer ◽  
Nozzle Exit ◽  
Momentum Thickness ◽  
Shear Layer Instability ◽  
Instability Waves ◽  
Exit Velocity ◽  
Exit Boundary ◽  
Boundary Layer Profile

The influence of the nozzle-exit boundary-layer profile on high-subsonic jets is investigated by performing compressible large-eddy simulations (LES) for three isothermal jets at a Mach number of 0.9 and a diameter-based Reynolds number of $5\times 10^{4}$, and by conducting linear stability analyses from the mean-flow fields. At the exit section of a pipe nozzle, the jets exhibit boundary layers of momentum thickness of approximately 2.8 % of the nozzle radius and a peak value of turbulence intensity of 6 %. The boundary-layer shape factors, however, vary and are equal to 2.29, 1.96 and 1.71. The LES flow and sound fields differ significantly between the first jet with a laminar mean exit velocity profile and the two others with transitional profiles. They are close to each other in these two cases, suggesting that similar results would also be obtained for a jet with a turbulent profile. For the two jets with non-laminar profiles, the instability waves in the near-nozzle region emerge at higher frequencies, the mixing layers spread more slowly and contain weaker low-frequency velocity fluctuations and the noise levels in the acoustic field are lower by 2–3 dB compared to the laminar case. These trends can be explained by the linear stability analyses. For the laminar boundary-layer profile, the initial shear-layer instability waves are most strongly amplified at a momentum-thickness-based Strouhal number $St_{\unicode[STIX]{x1D703}}=0.018$, which is very similar to the value obtained downstream in the mixing-layer velocity profiles. For the transitional profiles, on the contrary, they predominantly grow at higher Strouhal numbers, around $St_{\unicode[STIX]{x1D703}}=0.026$ and 0.032, respectively. As a consequence, the instability waves rapidly vanish during the boundary-layer/shear-layer transition in the latter cases, but continue to grow over a large distance from the nozzle in the former case, leading to persistent large-scale coherent structures in the mixing layers for the jet with a laminar exit velocity profile.

Sign in / Sign up

Export Citation Format

Share Document