The effect of radius ratio on the stability of Couette flow and Taylor vortex flow

1984 ◽  
Vol 27 (10) ◽  
pp. 2403 ◽  
Author(s):  
R. C. DiPrima ◽  
P. M. Eagles ◽  
B. S. Ng
Keyword(s):  
Couette Flow ◽  
Vortex Flow ◽  
Radius Ratio ◽  
Taylor Vortex ◽  
Taylor Vortex Flow ◽  
The Stability

Development and Effects of Super-Critical Taylor-Vortex Flow in a Lightly Loaded Journal Bearing

1974 ◽  
Vol 96 (1) ◽  
pp. 28-35 ◽  
Author(s):  
R. C. DiPrima ◽  
J. T. Stuart
Keyword(s):  
Vortex Flow ◽  
Axial Direction ◽  
Basic Flow ◽  
Circular Cylinders ◽  
Taylor Vortex ◽  
Taylor Vortices ◽  
Taylor Vortex Flow ◽  
Secondary Motion ◽  
The Stability ◽  
Unified Description

At sufficiently high operating speeds in lightly loaded journal bearings the basic laminar flow will be unstable. The instability leads to a new steady secondary motion of ring vortices around the cylinders with a regular periodicity in the axial direction and a strength that depends on the azimuthial position (Taylor vortices). Very recently published work on the basic flow and the stability of the basic flow between eccentric circular cylinders with the inner cylinder rotating is summarized so as to provide a unified description. A procedure for calculating the Taylor-vortex flow is developed, a comparison with observed properties of the flow field is made, and formulas for the load and torque are given.

Experimental Study of Axial Slit Wall Effect on Taylor-Couette Flow

2007 ◽  
Author(s):  
Sang-Hyuk Lee ◽  
Hyoung-Bum Kim
Keyword(s):  
Reynolds Number ◽  
Couette Flow ◽  
Vortex Flow ◽  
Outer Cylinder ◽  
Velocity Fields ◽  
Taylor Vortex ◽  
Stable Mode ◽  
Taylor Vortex Flow ◽  
Taylor Couette ◽  
Taylor Couette Flow

Taylor-Couette flow has been studied extensively and lots of variables which affect the flow instability are being reported. The wall geometry effect of Taylor-Couette flow, however, has been less studied. In this study, we investigated the effect of axial slit of outer cylinder. This kind of configuration can be easily seen in rotating machinery. Particle image velocimetry method was used to measure the velocity fields in longitudinal and latitudinal planes. The index matching method was used to avoid light refraction. The velocity fields between the slit and plain model which has the smooth wall were compared. From the experiments, both models have the same flow mode below Re = 143. The transition from circular Couette flow to plain Taylor vortex flow began at Re = 103, and the next transition to wavy vortex flow occurred at 124. The effect of slit wall appeared when the Reynolds number is larger than Re = 143. Above this Reynolds number, there was no stable mode and plain and wavy Taylor vortex flow randomly appeared.

LOWEST STABILITY BOUNDARY ON FLOW OF CONCENTRIC ROTATING CYLINDERS

2010 ◽  
Vol 20 (05) ◽  
pp. 1527-1532
Author(s):  
H. C. LIN ◽  
W. M. YANG
Keyword(s):  
Vortex Flow ◽  
Stability Boundary ◽  
Radius Ratio ◽  
Taylor Vortex ◽  
Rotating Cylinders ◽  
Instability Analysis ◽  
Taylor Vortex Flow ◽  
Instability Boundary

In this study, we numerically investigate the lowest instability boundary of nonaxisymmetric Taylor vortex flow (TVF) for different axial wavenumbers. The variation in the axial wavenumber of a supercritical TVF can affect the instability of the flow, because the wavelength of a Taylor vortex is constant only when the flow is axisymmetrical. When the nonaxisymmetric TVF is transformed to a wavy vortex flow (WVF), the instability boundary is changed with the variation in the axial wavenumber. We carry out an instability analysis of the nonaxisymmetric TVF between two concentric rotating cylinders, which have a radius ratio of 0.88.

Hydromagnetic Taylor–Couette flow: wavy modes

2002 ◽  
Vol 472 ◽  
pp. 399-410 ◽  
Author(s):  
A. P. WILLIS ◽  
C. F. BARENGHI
Keyword(s):  
Magnetic Field ◽  
Couette Flow ◽  
Vortex Flow ◽  
Axial Magnetic Field ◽  
Taylor Vortex ◽  
Taylor Vortex Flow ◽  
Critical Reynolds Numbers ◽  
Taylor Couette ◽  
Axisymmetric Solutions ◽  
Taylor Couette Flow

We investigate magnetic Taylor–Couette flow in the presence of an imposed axial magnetic field. First we calculate nonlinear steady axisymmetric solutions and determine how their strength depends on the applied magnetic field. Then we perturb these solutions to find the critical Reynolds numbers for the appearance of wavy modes, and the related wave speeds, at increasing magnetic field strength. We find that values of imposed magnetic field which alter only slightly the transition from circular-Couette flow to Taylor-vortex flow, can shift the transition from Taylor-vortex flow to wavy modes by a substantial amount. The results are compared to those for onset in the absence of a magnetic field.

scholarly journals Secondary instabilities in Taylor–Couette flow of shear-thinning fluids

2021 ◽  
Vol 933 ◽  
Author(s):  
S. Topayev ◽  
C. Nouar ◽  
J. Dusek
Keyword(s):  
Numerical Simulations ◽  
Couette Flow ◽  
Vortex Flow ◽  
Shear Thinning ◽  
Taylor Vortex ◽  
Shear Thinning Fluids ◽  
Taylor Vortex Flow ◽  
Viscous Shear ◽  
Taylor Couette ◽  
Shear Thinning Fluid

The stability of the Taylor vortex flow in Newtonian and shear-thinning fluids is investigated in the case of a wide gap Taylor–Couette system. The considered radius ratio is $\eta = R_1/R_2=0.4$ . The aspect ratio (length over the gap width) of experimental configuration is 32. Flow visualization and measurements of two-dimensional flow fields with particle image velocimetry are performed in a glycerol aqueous solution (Newtonian fluid) and in xanthan gum aqueous solutions (shear-thinning fluids). The experiments are accompanied by axisymmetric numerical simulations of Taylor–Couette flow in the same gap of a Newtonian and a purely viscous shear-thinning fluid described by the Carreau model. The experimentally observed critical Reynolds and wavenumbers at the onset of Taylor vortices are in very good agreement with that obtained from a linear theory assuming a purely viscous shear-thinning fluid and infinitely long cylinders. They are not affected by the viscoelasticity of the used fluids. For the Newtonian fluid, the Taylor vortex flow (TVF) regime is found to bifurcate into a wavy vortex flow with a high frequency and low amplitude of axial oscillations of the vortices at ${Re} = 5.28 \, {Re}_c$ . At ${Re} = 6.9 \, {Re}_c$ , the frequency of oscillations decreases and the amplitude increases abruptly. For the shear-thinning fluids the secondary instability conserves axisymmetry. The latter is characterized by an instability of the array of vortices leading to a continuous sequence of creation and merging of vortex pairs. Axisymmetric numerical simulations reproduce qualitatively very well the experimentally observed flow behaviour.

Second Taylor vortex flow: Effects of radius ratio and aspect ratio

2002 ◽  
Vol 14 (4) ◽  
pp. 1537-1539 ◽  
Author(s):  
Q. Xiao ◽  
T. T. Lim ◽  
Y. T. Chew
Keyword(s):  
Aspect Ratio ◽  
Vortex Flow ◽  
Radius Ratio ◽  
Taylor Vortex ◽  
Taylor Vortex Flow ◽  
Flow Effects
Sign in / Sign up

Export Citation Format

Share Document