scholarly journals Developing a camera-based 3D momentum imaging system capable of 1 Mhits/s

2020 ◽  
Vol 91 (2) ◽  
pp. 023316 ◽  
Author(s):  
Duke A. Debrah ◽  
Gabriel A. Stewart ◽  
Gihan Basnayake ◽  
Andrei Nomerotski ◽  
Peter Svihra ◽  
...  
Keyword(s):  
Imaging System ◽  
Momentum Imaging

New Aspects in the Design of Electron Optical Magnification Systems

1972 ◽  
Vol 30 ◽  
pp. 606-607
Author(s):  
Willem H.J. Andersen
Keyword(s):  
Electron Microscope ◽  
Imaging System ◽  
Chromatic Aberration ◽  
Research Tool ◽  
Energy Losses ◽  
Objective Lens ◽  
Theoretical Limit ◽  
Optical Magnification ◽  
Chromatic Aberrations ◽  
High Degree

Electron microscope design, and particularly the design of the imaging system, has reached a high degree of perfection. Present objective lenses perform up to their theoretical limit, while the whole imaging system, consisting of three or four lenses, provides very wide ranges of magnification and diffraction camera length with virtually no distortion of the image. Evolution of the electron microscope in to a routine research tool in which objects of steadily increasing thickness are investigated, has made it necessary for the designer to pay special attention to the chromatic aberrations of the magnification system (as distinct from the chromatic aberration of the objective lens). These chromatic aberrations cause edge un-sharpness of the image due to electrons which have suffered energy losses in the object.There exist two kinds of chromatic aberration of the magnification system; the chromatic change of magnification, characterized by the coefficient Cm, and the chromatic change of rotation given by Cp.

Some Quantification Problems in Parallel EELS Images

1990 ◽  
Vol 48 (2) ◽  
pp. 36-37
Author(s):  
G. Botton ◽  
G. L’Espérance ◽  
M.D. Ball ◽  
C.E. Gallerneault
Keyword(s):  
Electron Microscope ◽  
Imaging System ◽  
Signal To Noise Ratio ◽  
Scanning Transmission Electron Microscope ◽  
Acquisition Time ◽  
Thickness Variation ◽  
Transmission Electron ◽  
Distribution Of Elements ◽  
Scanning Transmission ◽  
Present Distribution

The recently developed parallel electron energy loss spectrometers (PEELS) have led to a significant reduction in spectrum acquisition time making EELS more useful in many applications in material science. Dwell times as short as 50 msec per spectrum with a PEELS coupled to a scanning transmission electron microscope (STEM), can make quantitative EEL images accessible. These images would present distribution of elements with the high spatial resolution inherent to EELS. The aim of this paper is to briefly investigate the effect of acquisition time per pixel on the signal to noise ratio (SNR), the effect of thickness variation and crystallography and finally the energy stability of spectra when acquired in the scanning mode during long periods of time.The configuration of the imaging system is the following: a Gatan PEELS is coupled to a CM30 (TEM/STEM) electron microscope, the control of the spectrometer and microscope is performed through a LINK AN10-85S MCA which is interfaced to a IBM RT 125 (running under AIX) via a DR11W line.

Multi-mode light microscopy of microtubule assembly dynamics and chromosome movement in vivo and In vitro

1996 ◽  
Vol 54 ◽  
pp. 730-731
Author(s):  
E. D. Salmon ◽  
J. C. Waters ◽  
C. Waterman-Storer
Keyword(s):  
Imaging System ◽  
Ccd Camera ◽  
Transmitted Light ◽  
Microtubule Assembly ◽  
Live Cells ◽  
Optical Efficiency ◽  
Multiple Band ◽  
Multi Mode

We have developed a multi-mode digital imaging system which acquires images with a cooled CCD camera (Figure 1). A multiple band pass dichromatic mirror and robotically controlled filter wheels provide wavelength selection for epi-fluorescence. Shutters select illumination either by epi-fluorescence or by transmitted light for phase contrast or DIC. Many of our experiments involve investigations of spindle assembly dynamics and chromosome movements in live cells or unfixed reconstituted preparations in vitro in which photodamage and phototoxicity are major concerns. As a consequence, a major factor in the design was optical efficiency: achieving the highest image quality with the least number of illumination photons. This principle applies to both epi-fluorescence and transmitted light imaging modes. In living cells and extracts, microtubules are visualized using X-rhodamine labeled tubulin. Photoactivation of C2CF-fluorescein labeled tubulin is used to locally mark microtubules in studies of microtubule dynamics and translocation. Chromosomes are labeled with DAPI or Hoechst DNA intercalating dyes.

Correlation of Pore Structure and Permeability by SEM-Image Analysis

1990 ◽  
Vol 48 (1) ◽  
pp. 428-429
Author(s):  
C. A. Callender ◽  
Wm. C. Dawson ◽  
J. J. Funk
Keyword(s):  
Image Analysis ◽  
Pore Structure ◽  
Imaging System ◽  
Pore Space ◽  
Simulation Models ◽  
Image Analyzer ◽  
Imaging Data ◽  
Sem Images ◽  
Thin Sections ◽  
Rock Types

The geometric structure of pore space in some carbonate rocks can be correlated with petrophysical measurements by quantitatively analyzing binaries generated from SEM images. Reservoirs with similar porosities can have markedly different permeabilities. Image analysis identifies which characteristics of a rock are responsible for the permeability differences. Imaging data can explain unusual fluid flow patterns which, in turn, can improve production simulation models.Analytical SchemeOur sample suite consists of 30 Middle East carbonates having porosities ranging from 21 to 28% and permeabilities from 92 to 2153 md. Engineering tests reveal the lack of a consistent (predictable) relationship between porosity and permeability (Fig. 1). Finely polished thin sections were studied petrographically to determine rock texture. The studied thin sections represent four petrographically distinct carbonate rock types ranging from compacted, poorly-sorted, dolomitized, intraclastic grainstones to well-sorted, foraminiferal,ooid, peloidal grainstones. The samples were analyzed for pore structure by a Tracor Northern 5500 IPP 5B/80 image analyzer and a 80386 microprocessor-based imaging system. Between 30 and 50 SEM-generated backscattered electron images (frames) were collected per thin section. Binaries were created from the gray level that represents the pore space. Calculated values were averaged and the data analyzed to determine which geological pore structure characteristics actually affect permeability.

Electron Holography Improving Transmission Electron Microscopy

1990 ◽  
Vol 48 (1) ◽  
pp. 208-209
Author(s):  
Hannes Lichte
Keyword(s):  
Electron Microscopy ◽  
Transfer Functions ◽  
Imaging System ◽  
Spherical Aberration ◽  
Image Plane ◽  
Chromatic Aberration ◽  
Object Wave ◽  
Objective Lens ◽  
Electron Holography ◽  
Wave Aberration

Generally, the electron object wave o(r) is modulated both in amplitude and phase. In the image plane of an ideal imaging system we would expect to find an image wave b(r) that is modulated in exactly the same way, i. e. b(r) =o(r). If, however, there are aberrations, the image wave instead reads as b(r) =o(r) * FT(WTF) i. e. the convolution of the object wave with the Fourier transform of the wave transfer function WTF . Taking into account chromatic aberration, illumination divergence and the wave aberration of the objective lens, one finds WTF(R) = Echrom(R)Ediv(R).exp(iX(R)) . The envelope functions Echrom(R) and Ediv(R) damp the image wave, whereas the effect of the wave aberration X(R) is to disorder amplitude and phase according to real and imaginary part of exp(iX(R)) , as is schematically sketched in fig. 1.Since in ordinary electron microscopy only the amplitude of the image wave can be recorded by the intensity of the image, the wave aberration has to be chosen such that the object component of interest (phase or amplitude) is directed into the image amplitude. Using an aberration free objective lens, for X=0 one sees the object amplitude, for X= π/2 (“Zernike phase contrast”) the object phase. For a real objective lens, however, the wave aberration is given by X(R) = 2π (.25 Csλ3R4 + 0.5ΔzλR2), Cs meaning the coefficient of spherical aberration and Δz defocusing. Consequently, the transfer functions sin X(R) and cos(X(R)) strongly depend on R such that amplitude and phase of the image wave represent only fragments of the object which, fortunately, supplement each other. However, recording only the amplitude gives rise to the fundamental problems, restricting resolution and interpretability of ordinary electron images:

An Study of Influence of Imperfections on the Delamination of Diamond-Like Carbon Films

2002 ◽  
Vol 719 ◽  
Author(s):  
Myoung-Woon Moon ◽  
Kyang-Ryel Lee ◽  
Jin-Won Chung ◽  
Kyu Hwan Oh
Keyword(s):  
Cross Sections ◽  
Focused Ion Beam ◽  
Imaging System ◽  
Ion Beam ◽  
Carbon Films ◽  
Diamond Like Carbon ◽  
Glass Substrates ◽  
Atomic Force ◽  
Initiation And Propagation

AbstractThe role of imperfections on the initiation and propagation of interface delaminations in compressed thin films has been analyzed using experiments with diamond-like carbon (DLC) films deposited onto glass substrates. The surface topologies and interface separations have been characterized by using the Atomic Force Microscope (AFM) and the Focused Ion Beam (FIB) imaging system. The lengths and amplitudes of numerous imperfections have been measured by AFM and the interface separations characterized on cross sections made with the FIB. Chemical analysis of several sites, performed using Auger Electron Spectroscopy (AES), has revealed the origin of the imperfections. The incidence of buckles has been correlated with the imperfection length.

Fundamental Imaging System Analysis for Autonomous Vehicles

2018 ◽  
Vol 2018 (17) ◽  
pp. 105-1-105-10 ◽  
Author(s):  
Robin Jenkin ◽  
Paul Kane
Keyword(s):  
Autonomous Vehicles ◽  
System Analysis ◽  
Imaging System
Sign in / Sign up

Export Citation Format

Share Document