Experimental investigation of flame stabilization using conical bluff body for thrust augmenters

2019 ◽  
Author(s):  
S. Boopathi ◽  
P. Maran ◽  
K. Arumugam
Keyword(s):  
Experimental Investigation ◽  
Bluff Body ◽  
Flame Stabilization

Experimental investigation of isothermal and reacting flow characteristics downstream of axisymmetric bluff body stabilizers under stratified or fully premixed inlet mixture conditions

2020 ◽  
Author(s):  
Γεώργιος Πατεράκης
Keyword(s):  
Experimental Investigation ◽  
Turbulent Flow ◽  
Bluff Body ◽  
Operating Conditions ◽  
Reacting Flow ◽  
Wide Range ◽  
Flow Features ◽  
Air Mixing ◽  
The Impact ◽  
Stratified Flames

The current work describes an experimental investigation of isothermal and turbulent reacting flow field characteristics downstream of axisymmetric bluff body stabilizers under a variety of inlet mixture conditions. Fully premixed and stratified flames established downstream of this double cavity premixer/burner configuration were measured and assessed under lean and ultra-lean operating conditions. The aim of this thesis was to further comprehend the impact of stratifying the inlet fuelair mixture on the reacting wake characteristics for a range of practical stabilizers under a variety of inlet fuel-air settings. In the first part of this thesis, the isothermal mean and turbulent flow features downstream of a variety of axisymmetric baffles was initially examined. The effect of different shapes, (cone or disk), blockage ratios, (0.23 and 0.48), and rim thicknesses of these baffles was assessed. The variations of the recirculation zones, back flow velocity magnitude, annular jet ejection angles, wake development, entrainment efficiency, as well as several turbulent flow features were obtained, evaluated and appraised. Next, a comparative examination of the counterpart turbulent cold fuel-air mixing performance and characteristics of stratified against fully-premixed operation was performed for a wide range of baffle geometries and inlet mixture conditions. Scalar mixing and entrainment properties were investigated at the exit plane, at the bluff body annular shear layer, at the reattachment region and along the developing wake were investigated. These isothermal studies provided the necessary background information for clarifying the combustion properties and interpreting the trends in the counterpart turbulent reacting fields. Subsequently, for selected bluff bodies, flame structures and behavior for operation with a variety of reacting conditions were demonstrated. The effect of inlet fuel-air mixture settings, fuel type and bluff body geometry on wake development, flame shape, anchoring and structure, temperatures and combustion efficiencies, over lean and close to blow-off conditions, was presented and analyzed. For the obtained measurements infrared radiation, particle image velocimetry, laser doppler velocimetry, chemiluminescence imaging set-ups, together with Fouriertransform infrared spectroscopy, thermocouples and global emission analyzer instrumentation was employed. This helped to delineate a number of factors that affectcold flow fuel-air mixing, flame anchoring topologies, wake structure development and overall burner performance. The presented data will also significantly assist the validation of computational methodologies for combusting flows and the development of turbulence-chemistry interaction models.

Review and Analysis of Bluff Body Flame Stabilization Data

2008 ◽  
Author(s):  
Sajjad A. Husain ◽  
Ganesh Nair ◽  
Santosh Shanbhogue ◽  
Tim C. Lieuwen
Keyword(s):  
Activation Energy ◽  
Kinetic Modeling ◽  
First Principles ◽  
Bluff Body ◽  
Large Range ◽  
Flame Stabilization ◽  
Local Extinction ◽  
Data Set ◽  
Flame Sheet ◽  
Semi Empirical

This paper compiles and analyzes bluff body stabilized flame blowoff data from the literature. Many of these studies contain semi-empirical blowoff correlations that are, in essence, Damko¨hler number correlations of their data. This paper re-analyzes these data, utilizing various Damko¨hler number correlations based upon detailed kinetic modeling for determining chemical time scales. While the results from this compilation are similar to that deduced from many earlier studies, it demonstrates that a rather comprehensive data set taken over a large range of conditions can be correlated from “first-principles” based calculations that do not rely on empirical fits or adjustable constants (e.g., global activation energy or pressure exponents). The paper then discusses the implications of these results on understanding of blowoff. Near blowoff flames experience local extinction of the flame sheet, manifested as “holes” that form and convect downstream. However, local extinction is distinct from blowoff — in fact, under certain conditions the flame can apparently persist indefinitely with certain levels of local extinction. We hypothesize that simple Damko¨hler number correlations contain the essential physics describing this first stage of blowoff; i.e., they are correlations for the conditions where local extinction on the flame begins, but do not fundamentally describe the ultimate blowoff condition itself. However, such correlations are reasonably successful in correlating blowoff limits because the ultimate blowoff event appears to be correlated to some extent to the onset of this first stage.

Simulation of Two-Dimensional Turbulent Recirculating Flow Field Behind a V-Shaped Bluff Body

1994 ◽  
Author(s):  
Z. Gu ◽  
M. A. R. Sharif
Keyword(s):  
Flow Field ◽  
Bluff Body ◽  
Flame Stabilization ◽  
Bluff Bodies ◽  
Two Dimensional ◽  
Combustion Chambers ◽  
Recirculating Flow ◽  
Conservative Form ◽  
Curvilinear Grid ◽  
Predictor Corrector

Abstract The two-dimensional turbulent recirculating flow fields behind a V-shaped bluff body have been investigated numerically. Similar bluff bodies are used in combustion chambers for flame stabilization. The governing transport equations in conservative form are solved by a pressure based predictor-corrector method. The standard k-ϵ turbulence closure model and a boundary fitted multi-block curvilinear grid system are used in the computation. The code is validated against turbulent flow over a backward facing step problem. The predicted flow field behind the bluff body is also compared with experiment. It is found that while the qualitative features of the flow are well predicted, there is quantitative disagreement between the measurement and prediction. This disagreement can be partially attributed to the k-ϵ turbulence model which is known to be inadequate for recirculating flows. Parametric investigation of the flow field by varying the shape and size of the bluff body is also performed and the results are reported.

scholarly journals Dynamics of lean premixed flames stabilized on a meso-scale bluff-body in an unconfined flow field

2018 ◽  
Vol 13 (6) ◽  
pp. 48 ◽  
Author(s):  
Yu Jeong Kim ◽  
Bok Jik Lee ◽  
Hong G. Im
Keyword(s):  
Bluff Body ◽  
Proper Time ◽  
Premixed Flames ◽  
Narrow Channel ◽  
Flame Stabilization ◽  
Inflow Velocity ◽  
Lean Premixed Flames ◽  
Lean Premixed ◽  
The Mean ◽  
Meso Scale

Two-dimensional direct numerical simulations were conducted to investigate the dynamics of lean premixed flames stabilized on a meso-scale bluff-body in hydrogen-air and syngas-air mixtures. To eliminate the flow confinement effect due to the narrow channel, a larger domain size at twenty times the bluff-body dimension was used in the new simulations. Flame/flow dynamics were examined as the mean inflow velocity is incrementally raised until blow-off occurs. As the mean inflow velocity is increased, several distinct modes in the flame shape and fluctuation patterns were observed. In contrast to our previous study with a narrow channel, the onset of local extinction was observed during the asymmetric vortex shedding mode. Consequently, the flame stabilization and blow-off behavior was found to be dictated by the combined effects of the hot product gas pocket entrained into the extinction zone and the ability to auto-ignite the mixture within the given residence time corresponding to the lateral flame fluctuations. A proper time scale analysis is attempted to characterize the flame blow-off mechanism, which turns out to be consistent with the classic theory of Zukoski and Marble.

Sign in / Sign up

Export Citation Format

Share Document