Frequency-domain coupling model of transformer DC bias circuit and magnetic circuit based on harmonic balance method

2019 ◽  
Author(s):  
Yuqing Zhou
Keyword(s):  
Frequency Domain ◽  
Harmonic Balance ◽  
Magnetic Circuit ◽  
Harmonic Balance Method ◽  
Coupling Model ◽  
Balance Method ◽  
Dc Bias ◽  
Domain Coupling

scholarly journals Comparison of Common Methods in Dynamic Response Predictions of Rotor Systems with Malfunctions

2014 ◽  
Vol 2014 ◽  
pp. 1-8
Author(s):  
Hongliang Yao ◽  
Qian Zhao ◽  
Qi Xu ◽  
Bangchun Wen
Keyword(s):  
Frequency Domain ◽  
Harmonic Balance ◽  
Harmonic Balance Method ◽  
Balance Method ◽  
Newmark Method ◽  
Incremental Harmonic Balance Method ◽  
Rotor Systems ◽  
Double Frequency ◽  
Frequency Domain Methods ◽  
Incremental Harmonic Balance

The efficiency and accuracy of common time and frequency domain methods that are used to simulate the response of a rotor system with malfunctions are compared and analyzed. The Newmark method and the incremental harmonic balance method are selected as typical representatives of time and frequency domain methods, respectively. To improve the simulation efficiency, the fixed interface component mode synthesis approach is combined with the Newmark method and the receptance approach is combined with the incremental harmonic balance method. Numerical simulations are performed for rotor systems with single and double frequency excitations. The inherent characteristic that determines the efficiency of the two methods is analyzed. The results of the analysis indicated that frequency domain methods are suitable single and double frequency excitation rotor systems, whereas time domain methods are more suitable for multifrequency excitation rotor systems.

scholarly journals Dual Time Stepping Algorithms With the High Order Harmonic Balance Method for Contact Interfaces With Fretting-Wear

2011 ◽  
Author(s):  
Loi¨c Salles ◽  
Laurent Blanc ◽  
Fabrice Thouverez ◽  
Alexander M. Gouskov ◽  
Pierrick Jean
Keyword(s):  
Frequency Domain ◽  
Dry Friction ◽  
Harmonic Balance ◽  
Harmonic Balance Method ◽  
Contact Forces ◽  
Balance Method ◽  
Fretting Wear ◽  
Rate Equations ◽  
Time Stepping ◽  
Dual Time Stepping

Contact interfaces with dry friction are frequently used in turbomachinery. Dry friction damping produced by the sliding surfaces of these interfaces reduces the amplitude of bladed-disk vibration. The relative displacements at these interfaces lead to fretting-wear which reduces the average life expectancy of the structure. Frequency response functions are calculated numerically by using the multi-Harmonic Balance Method (mHBM). The Dynamic Lagrangian Frequency-Time method is used to calculate contact forces in the frequency domain. A new strategy for solving non-linear systems based on dual time stepping is applied. This method is faster than using Newton solvers. It was used successfully for solving Nonlinear CFD equations in the frequency domain. This new approach allows identifying the steady state of worn systems by integrating wear rate equations a on dual time scale. The dual time equations are integrated by an implicit scheme. Of the different orders tested, the first order scheme provided the best results.

Simulations of Unsteady Blade Row Interactions Using Linear and Non-Linear Frequency Domain Methods

2015 ◽  
Author(s):  
Christian Frey ◽  
Graham Ashcroft ◽  
Hans-Peter Kersken
Keyword(s):  
Frequency Domain ◽  
Harmonic Balance ◽  
Measurement Data ◽  
Harmonic Balance Method ◽  
Balance Method ◽  
Frequency Domain Methods ◽  
Blade Row ◽  
Non Linear ◽  
Rotor Stator Interaction ◽  
Unsteady Simulation

This paper compares various approaches to simulate unsteady blade row interactions in turbomachinery. Unsteady simulations of turbomachinery flows have gained importance over the last years since increasing computing power allows the user to consider 3D unsteady flows for industrially relevant configurations. Furthermore, for turbomachinery flows, the last two decades have seen considerable efforts in developing adequate CFD methods which exploit the rotational symmetries of blade rows and are therefore up to several orders of magnitude more efficient than the standard unsteady approach for full wheel configurations. This paper focusses on the harmonic balance method which has been developed recently by the authors. The system of equations as well as the iterative solver are formulated in the frequency domain. The aim of this paper is to compare the harmonic balance method with the time-linearized as well as the non-linear unsteady approach. For the latter the unsteady flow fields in a fan stage are compared to reference results obtained with a highly resolved unsteady simulation. Moreover the amplitudes of the acoustic modes which are due to the rotor stator interaction are compared to measurement data available for this fan stage. The harmonic balance results for different sets of harmonics in the blade rows are used to explain the minor discrepancies between the time-linearized and unsteady results published by the authors in previous publications. The results show that the differences are primarily due to the neglection of the two-way coupling in the time-linearized simulations.

scholarly journals Dual Time Stepping Algorithms With the High Order Harmonic Balance Method for Contact Interfaces With Fretting-Wear

2011 ◽  
Vol 134 (3) ◽  
Author(s):  
Loïc Salles ◽  
Laurent Blanc ◽  
Fabrice Thouverez ◽  
Alexander M. Gouskov ◽  
Pierrick Jean
Keyword(s):  
Frequency Domain ◽  
Dry Friction ◽  
Harmonic Balance ◽  
Harmonic Balance Method ◽  
Contact Forces ◽  
Balance Method ◽  
Fretting Wear ◽  
Rate Equations ◽  
Time Stepping ◽  
Dual Time Stepping

Contact interfaces with dry friction are frequently used in turbomachinery. Dry friction damping produced by the sliding surfaces of these interfaces reduces the amplitude of bladed-disk vibration. The relative displacements at these interfaces lead to fretting-wear which reduces the average life expectancy of the structure. Frequency response functions are calculated numerically by using the multi-harmonic balance method (mHBM). The dynamic Lagrangian frequency-time method is used to calculate contact forces in the frequency domain. A new strategy for solving nonlinear systems based on dual time stepping is applied. This method is faster than using Newton solvers. It was used successfully for solving Nonlinear CFD equations in the frequency domain. This new approach allows identifying the steady state of worn systems by integrating wear rate equations a on dual time scale. The dual time equations are integrated by an implicit scheme. Of the different orders tested, the first order scheme provided the best results.

scholarly journals A Mixed Shooting – Harmonic Balance Method for Unilaterally Constrained Mechanical Systems

2016 ◽  
Vol 63 (2) ◽  
pp. 297-314 ◽  
Author(s):  
Frederic Schreyer ◽  
Remco I. Leine
Keyword(s):  
Frequency Domain ◽  
Time Domain ◽  
Harmonic Balance ◽  
Degrees Of Freedom ◽  
Shooting Method ◽  
Mechanical Systems ◽  
Harmonic Balance Method ◽  
Balance Method ◽  
Constrained Mechanical Systems ◽  
Nonlinear Force

Abstract In this paper we present a mixed shooting – harmonic balance method for large linear mechanical systems on which local nonlinearities are imposed. The standard harmonic balance method (HBM), which approximates the periodic solution in frequency domain, is very popular as it is well suited for large systems with many degrees of freedom. However, it suffers from the fact that local nonlinearities cannot be evaluated directly in the frequency domain. The standard HBM performs an inverse Fourier transform, then calculates the nonlinear force in time domain and subsequently the Fourier coefficients of the nonlinear force. The disadvantage of the HBM is that strong nonlinearities are poorly represented by a truncated Fourier series. In contrast, the shooting method operates in time-domain and relies on numerical time-simulation. Set-valued force laws such as dry friction or other strong nonlinearities can be dealt with if an appropriate numerical integrator is available. The shooting method, however, becomes infeasible if the system has many states. The proposed mixed shooting-HBM approach combines the best of both worlds.

Sign in / Sign up

Export Citation Format

Share Document