Gas-dynamic designing and profiling complex for the two-element centrifugal compressor stage with 3D impeller

2019 ◽  
Author(s):  
A. M. Danilishin ◽  
Y. V. Kozhukhov ◽  
A. M. Simonov
Keyword(s):  
Centrifugal Compressor ◽  
Compressor Stage ◽  
Centrifugal Compressor Stage ◽  
Gas Dynamic

Method for computing the gas dynamic force on a diffuser blade of a centrifugal compressor stage

1991 ◽  
Vol 27 (9) ◽  
pp. 498-500
Author(s):  
E. V. Akhmedov ◽  
M. V. Golovin ◽  
A. S. Nuzhdin ◽  
I. Ya. Sukhomlinov
Keyword(s):  
Centrifugal Compressor ◽  
Dynamic Force ◽  
Compressor Stage ◽  
Centrifugal Compressor Stage ◽  
Gas Dynamic

An Investigation of the Stability Enhancement of a Centrifugal Compressor Stage Using a Porous Throat Diffuser

2017 ◽  
Vol 140 (1) ◽  
Author(s):  
Lee Galloway ◽  
Stephen Spence ◽  
Sung In Kim ◽  
Daniel Rusch ◽  
Klemens Vogel ◽  
...  
Keyword(s):  
Centrifugal Compressor ◽  
Compressor Stage ◽  
Vaned Diffuser ◽  
Flow Rates ◽  
Stall Inception ◽  
Centrifugal Compressor Stage ◽  
Operating Range ◽  
Stable Operating ◽  
The Stability ◽  
Circumferential Pressure

The stable operating range of a centrifugal compressor stage of an engine turbocharger is limited at low mass flow rates by aerodynamic instabilities which can lead to the onset of rotating stall or surge. There have been many techniques employed to increase the stable operating range of centrifugal compressor stages. The literature demonstrates that there are various possibilities for adding special treatments to the nominal diffuser vane geometry, or including injection or bleed flows to modify the diffuser flow field in order to influence diffuser stability. One such treatment is the porous throat diffuser (PTD). Although the benefits of this technique have been proven in the existing literature, a comprehensive understanding of how this technique operates is not yet available. This paper uses experimental measurements from a high pressure ratio (PR) compressor stage to acquire a sound understanding of the flow features within the vaned diffuser which affect the stability of the overall compression system and investigate the stabilizing mechanism of the porous throat diffuser. The nonuniform circumferential pressure imposed by the asymmetric volute is experimentally and numerically examined to understand if this provides a preferential location for stall inception in the diffuser. The following hypothesis is confirmed: linking of the diffuser throats via the side cavity equalizes the diffuser throat pressure, thus creating a more homogeneous circumferential pressure distribution, which delays stall inception to lower flow rates. The results of the porous throat diffuser configuration are compared to a standard vaned diffuser compressor stage in terms of overall compressor performance parameters, circumferential pressure nonuniformity at various locations through the compressor stage and diffuser subcomponent analysis. The diffuser inlet region was found to be the element most influenced by the porous throat diffuser, and the stability limit is mainly governed by this element.

scholarly journals Optimization Design of the Over-All Dimensions of Centrifugal Compressor Stage

1988 ◽  
Author(s):  
Wang Qinghuan ◽  
Sun Zhiqin
Keyword(s):  
Centrifugal Compressor ◽  
Computer Aided Design ◽  
Optimization Design ◽  
Optimization Method ◽  
Complex Method ◽  
Compressor Stage ◽  
Local Optima ◽  
Centrifugal Compressor Stage ◽  
Optimum Solution ◽  
Nonlinear Objective Function

A new procedure employed in computer-aided design of centrifugal compressor stage to determine its over-all dimensions is described in this paper. By the use of the COMPLEX METHOD, the arbitrary number of variables to be optimized can be specified to remove the hidden danger of the local optima which stems from adopting a few, for example two or three, variables to be optimized. This procedure is available for any complicated implicit nonlinear objective function and ensures establishment of a true optimum solution. Numerical calculations have been carried out by using the computer program described here to check the ability of the optimization method. The results obtained by the calculations agree fairly well with that obtained by experiments.

1D and 3D-Design Strategies for Pressure Slope Optimization of High-Flow Transonic Centrifugal Compressor Impellers

2018 ◽  
Author(s):  
A. Hildebrandt ◽  
T. Ceyrowsky
Keyword(s):  
Centrifugal Compressor ◽  
High Flow ◽  
Flow Coefficient ◽  
Design Parameters ◽  
Angle Distribution ◽  
Compressor Stage ◽  
Impeller Blade ◽  
Design Point ◽  
Centrifugal Compressor Stage ◽  
Transonic Centrifugal Compressor

The present paper deals with the numerical and theoretical investigations of the effect of geometrical dimensions and 1D-design parameters on the impeller pressure slope of a transonic centrifugal compressor stage for industrial process application. A database being generated during the multi-objective and multi-point design process of a high flow coefficient impeller, comprising 545 CFD (Computational Fluid Dynamics) designs is investigated in off-design and design conditions by means of RANS (Reynolds Averaged Navier Stokes) simulation of an impeller with vaneless diffuser. For high flow coefficients of 0.16 < phi < 0.18, the CFD-setup has been validated against measurement data regarding stage and impeller performance taken from MAN test rig experimental data for a centrifugal compressor stage of similar flow coefficient. The paper aims at answering the question how classical design parameter, such as the impeller blade angle distribution, impeller suction diameter and camber line length affect the local and total relative diffusion and pressure slope towards impeller stall operation. A second order analysis of the CFD database is performed by cross-correlating the CFD data with results from impeller two-zone 1D modelling and a rapid loading calculation process by Stanitz and Prian. The statistical covariance of first order 1D-analysis parameters such as the mixing loss of the impeller secondary flow, the slip factor, impeller flow incidence is analyzed, thereby showing strong correlation with the design and off-design point efficiency and pressure slope. Finally, guide lines are derived in order to achieve either optimized design point efficiency or maximum negative pressure slope characteristics towards impeller stall operation.

Sign in / Sign up

Export Citation Format

Share Document