scholarly journals Effect of hydraulic retention time on palm oil mill effluent treatment in horizontal sub-surface flow constructed wetland

2019 ◽  
Author(s):  
Siti Kamariah Md Sa’at ◽  
Nastaein Qamaruz Zaman ◽  
Mohd Suffian Yusoff
Keyword(s):  
Palm Oil ◽  
Constructed Wetland ◽  
Retention Time ◽  
Hydraulic Retention Time ◽  
Surface Flow ◽  
Effluent Treatment ◽  
Palm Oil Mill Effluent ◽  
Palm Oil Mill

scholarly journals The Impact of Hydraulic Retention Time on the Biomethane Production from Palm Oil Mill Effluent (POME) in Two-Stage Anaerobic Fluidized Bed Reactor

2020 ◽  
Vol 10 (1) ◽  
pp. 11-16
Author(s):  
Laily Isna Ramadhani ◽  
Sri Ismiyati Damayanti ◽  
Hanifrahmawan Sudibyo ◽  
Muhammad Mufti Azis ◽  
Wiratni Budhijanto
Keyword(s):  
Fluidized Bed ◽  
Palm Oil ◽  
Retention Time ◽  
Hydraulic Retention Time ◽  
Ph Control ◽  
Palm Oil Mill Effluent ◽  
Two Stage ◽  
Second Stage ◽  
Biomethane Production ◽  
Palm Oil Mill

Indonesia is currently the most significant crude palm oil (CPO) producer in the world. In the production ofCPO, 0.7m3 of Palm Oil Mill Effluent (POME) is emitted as the wastewater for every ton of fresh fruit bunches processed in the palm oil mill.With the increasing amount of CPO production, an effective POME treatment system is urgently required to prevent severe environmental damage. The high organic content in the POME is a potential substrate forbio-methane production. The biomethane production is carried out by two groups of microbes, i.e., acidogenic and methanogenic microbes. Each group of bacteria performs optimally at different optimum conditions. To optimize the biomethane production, POME was treated sequentially by separating the acidogenic and methanogenic microbes into two stages of anaerobic fluidized bed reactors (AFBR). The steps were optimized differently according to the favorable conditions of each group of bacteria. Although perfect separation cannot be achieved, this study showed that pH control could split the domination of the bacteria, i.e., the first stage (maintained at pH 4-5) was dominated by the acidogenic microbes and the second stage (kept neutral) was governed by methanogens. In addition to the pH control, natural zeolitewas added as microbial immobilization media in the AFBR to improve the performance of the microorganisms, especially in preventing microbial wash out at short hydraulic retention time (HRT). This study was focused on the understanding of the effect of HRT on the performance of steady-state continuous AFBR. The first stage as the acidogenic reactorwas rununder acidic conditions (pH 4-5) at five different HRTs. In comparison, the second stage as the methanogenic reactorwasrun under the neutral condition at four different HRTs. In this work,short HRT (5 days) resulted in better performance in both acidogenic AFBR and methanogenic AFBR. The immobilization media was hence essential to reduce the risk of washout at such a short HRT. The two-stage system also resulted in quite a high percentage of soluble chemical oxygen demand (sCOD) removal, which was as much as 96.06%sCOD.

scholarly journals Acidogenesis of Palm Oil Mill Effluent to Produce Biogas: Effect of Hydraulic Retention Time and pH

2015 ◽  
Vol 195 ◽  
pp. 2466-2474 ◽  
Author(s):  
Bambang Trisakti ◽  
Veronica Manalu ◽  
Irvan Taslim ◽  
Muhammad Turmuzi
Keyword(s):  
Palm Oil ◽  
Retention Time ◽  
Hydraulic Retention Time ◽  
Palm Oil Mill Effluent ◽  
Palm Oil Mill

scholarly journals Removal behaviour of residual pollutants from biologically treated palm oil mill effluent by Pennisetum purpureum in constructed wetland

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Farhana Aziz Ujang ◽  
Ahmad Muhaimin Roslan ◽  
Nurul Atiqah Osman ◽  
Ashreen Norman ◽  
Juferi Idris ◽  
...  
Keyword(s):  
Palm Oil ◽  
Constructed Wetland ◽  
Surface Flow ◽  
Pollutant Removal ◽  
Palm Oil Mill Effluent ◽  
Pennisetum Purpureum ◽  
Quality Level ◽  
Wetland Soil ◽  
Treated Effluent ◽  
Palm Oil Mill

AbstractThe reason for such enormous efforts in palm oil mill effluent research would be what has been singled out as one of the major sources of pollution in Malaysia, and perhaps the most costly and complex waste to manage. Palm oil mill final discharge, which is the treated effluent, will usually be discharged to nearby land or river since it has been the least costly way to dispose of. Irrefutably, the quality level of the treated effluent does not always satisfy the surface water quality in conformity to physicochemical characteristics. To work on improving the treated effluent quality, a vertical surface-flow constructed wetland system was designed with Pennisetum purpureum (Napier grass) planted on the wetland floor. The system effectively reduced the level of chemical oxygen demand by 62.2 ± 14.3%, total suspended solid by 88.1 ± 13.3%, ammonia by 62.3 ± 24.8%, colour by 66.6 ± 13.19%, and tannin and lignin by 57.5 ± 22.3%. Heat map depicted bacterial diversity and relative abundance in life stages from the wetland soil, whereby bacterial community associated with the pollutant removal was found to be from the families Anaerolineaceae and Nitrosomonadaceae, and phyla Cyanobacteria and Acidobacteria.

Cultivation and application of Scenedesmus sp. strain UKM9 in palm oil mill effluent treatment for enhanced nutrient removal

2021 ◽  
Vol 294 ◽  
pp. 126295
Author(s):  
Ainil Farhan Mohd Udaiyappan ◽  
Hassimi Abu Hasan ◽  
Mohd Sobri Takriff ◽  
Siti Rozaimah Sheikh Abdullah ◽  
Nazlina Haiza Mohd Yasin ◽  
...  
Keyword(s):  
Palm Oil ◽  
Nutrient Removal ◽  
Effluent Treatment ◽  
Palm Oil Mill Effluent ◽  
Palm Oil Mill

Comparative study on structural modification ofCeiba pentandrafor oil sorption and palm oil mill effluent treatment

2014 ◽  
Vol 54 (11) ◽  
pp. 3044-3053 ◽  
Author(s):  
M.A. Abdullah ◽  
M. Afzaal ◽  
Z. Ismail ◽  
A. Ahmad ◽  
M.S. Nazir ◽  
...  
Keyword(s):  
Comparative Study ◽  
Palm Oil ◽  
Structural Modification ◽  
Effluent Treatment ◽  
Palm Oil Mill Effluent ◽  
Oil Sorption ◽  
Palm Oil Mill

Effect of Different Mediators on Bio-Energy Generation and Palm Oil Mill Effluent Treatment in an Air-Cathode Microbial Fuel Cell-Adsorption System

2021 ◽  
Vol 411 ◽  
pp. 67-78
Author(s):  
Ivy Ai Wei Tan ◽  
J.R. Selvanathan ◽  
M.O. Abdullah ◽  
N. Abdul Wahab ◽  
D. Kanakaraju
Keyword(s):  
Fuel Cell ◽  
Microbial Fuel Cell ◽  
Palm Oil ◽  
Oxygen Demand ◽  
Energy Generation ◽  
Effluent Treatment ◽  
Palm Oil Mill Effluent ◽  
Adsorption System ◽  
Air Cathode ◽  
Palm Oil Mill

Palm oil mill effluent (POME) discharged without treatment into watercourses can pollute the water source. Microbial fuel cell (MFC) has gained high attention as a green technology of converting organic wastewater into bio-energy. As an approach to overcome the limitations of the existing POME treatment methods, air-cathode MFC-Adsorption system is introduced as an innovative technology to treat POME and generate bio-electricity simultaneously. However, the use of conventional MFC with proton exchange membrane in large scale applications is restricted by the high cost and low power generation. Addition of mediator in MFC is essential in order to increase the electron transfer efficiency, hence enhancing the system performance. This study therefore aims to investigate the effect of different type of mediators i.e. congo red (CR), crystal violet (CV) and methylene blue (MB) on the performance of an affordable air-cathode MFC-Adsorption system made from earthen pot with POME as the substrate. The addition of different mediators altered the pH of the MFC-Adsorption system, in which more alkaline system showed better performance. The voltage generated in the system with CR, CV and MB mediator was 120.58 mV, 168.63 mV and 189.25 mV whereas the current generated was 2.41 mA, 3.37 mA and 3.79 mA, respectively. The power density of 290.79 mW/m3, 568.72 mW/m3 and 716.31 mW/m3 was produced in the MFC-Adsorption system with CR, CV and MB mediator, respectively. The highest POME treatment efficiency was achieved in MFC-Adsorption system with MB mediator, which resulted in biochemical oxygen demand, chemical oxygen demand, total suspended solids, turbidity and ammoniacal nitrogen removal of 75.3%, 84.8%, 91.5%, 86.1% and 23.31%, respectively. Overall, the air-cathode MFC-Adsorption system with addition of MB mediator was feasible for POME treatment and simultaneous bio-energy generation.

Sign in / Sign up

Export Citation Format

Share Document