scholarly journals Effect of graphene oxide (GO) on water flux of polyvinylidene difluoride (PVDF) membrane in oily wastewater

2019 ◽  
Author(s):  
Yamuna Munusamy ◽  
Tan Yi Fun
Keyword(s):  
Graphene Oxide ◽  
Water Flux ◽  
Oily Wastewater ◽  
Pvdf Membrane ◽  
Polyvinylidene Difluoride

scholarly journals Fabrication of Polyvinylidene Difluoride Membrane with Enhanced Pore and Filtration Properties by Using Tannic Acid as an Additive

Polymers ◽  
2022 ◽  
Vol 14 (1) ◽  
pp. 186
Author(s):  
Sri Mulyati ◽  
Sri Aprilia ◽  
Syawaliah Muchtar ◽  
Yanna Syamsuddin ◽  
Cut Meurah Rosnelly ◽  
...  
Keyword(s):  
Tannic Acid ◽  
Water Flux ◽  
Membrane Properties ◽  
Pvdf Membrane ◽  
Polyvinylidene Difluoride ◽  
Alkaline Conditions ◽  
Dope Solution ◽  
The Stability ◽  
Filtration Properties ◽  
Potential Use

Potential use of tannic acid (TA) as an additive for fabrication of polyvinylidene difluoride (PVDF) membrane was investigated. The TA was introduced by blending into the dope solution with varying concentrations of 0, 1, 1.5, and 2 wt%. The prepared membranes were characterized and evaluated for filtration of humic acid (HA) solution. The stability of the membrane under harsh treatment was also evaluated by one-week exposure to acid and alkaline conditions. The results show that TA loadings enhanced the resulting membrane properties. It increased the bulk porosity, water uptake, and hydrophilicity, which translated into improved clean water flux from 15.4 L/m2.h for the pristine PVDF membrane up to 3.3× for the TA-modified membranes with the 2 wt% TA loading. The flux recovery ratio (FRR) of the TA-modified membranes (FRRs = 78–83%) was higher than the pristine one (FRR = 58.54%), with suitable chemical stability too. The improved antifouling property for the TA-modified membranes was attributed to their enhanced hydrophilicity thanks to improved morphology and residual TA in the membrane matric.

scholarly journals Graphene Oxide and Carbon Nanotubes-Based Polyvinylidene Fluoride Membrane for Highly Increased Water Treatment

Nanomaterials ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 2498
Author(s):  
Jungryeong Chae ◽  
Taeuk Lim ◽  
Hao Cheng ◽  
Jie Hu ◽  
Sunghoon Kim ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Graphene Oxide ◽  
Water Treatment ◽  
Polyvinylidene Fluoride ◽  
Water Flux ◽  
Residual Chlorine ◽  
Pvdf Membrane ◽  
Filtration Performance ◽  
Class 1 ◽  
Multi Walled Carbon Nanotubes

As contaminated water increases due to environmental pollution, the need for excellent water treatment is increased, and several studies have reported the polyvinylidene fluoride (PVDF)-based water treatment membranes. However, the PVDF membrane has several problems such as low filtration performance, fouling resistance, and difficulty in precisely controlling the morphology of the pores and hydrophilicity. Therefore, we newly produced a water treatment PVDF membrane containing graphene oxide (GO) and multi-walled carbon nanotubes (MWCNTs) to improve the filtration performance. Surface properties of the fabricated membrane such as morphology, and size of pores, hydrophilicity, and water flux of the membrane were investigated. Additionally, the performance of these membrane filters was evaluated for free residual chlorine, turbidity, chromaticity, magnesium, sulfate, and particulates class 1 according to drinking water management act criteria, respectively. A performance improvement of at least 108.37% was observed compared to the Pure PVDF filter module and anti-fouling effects due to the functional groups of GO and MWCNTs. These results reveal that proposed membrane can accelerate the development of various water filtration applications.

scholarly journals Eco-Friendly Reduced Graphene Oxide Nanofilter Preparation and Application for Iron Removal

Separations ◽  
2021 ◽  
Vol 8 (5) ◽  
pp. 68
Author(s):  
Pankaj Kumar Jha ◽  
Watsa Khongnakorn ◽  
Chamorn Chawenjkigwanich ◽  
Md Shahariar Chowdhury ◽  
Kuaanan Techato
Keyword(s):  
Contact Angle ◽  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Inductively Coupled Plasma ◽  
Membrane Filter ◽  
Water Flux ◽  
Water Filtration ◽  
Dimethyl Formamide ◽  
Reduced Graphene ◽  
Callistemon Viminalis

In this paper, the green synthesis of reduced graphene oxide (r-GO) nanomaterials using Callistemon viminalis leaf extract as a reducing and stabilizing agent is reported for the first time. The synthesized r-GO nanomaterials were characterized using UV–Vis, XRD, FE-SEM, TEM, and energy dispersive X-ray (EDX) analyses. The nanofilter membrane was prepared by varying the amounts of r-GO nanomaterials in a Polysulfone-N,N-dimethyl formamide (DMF) solution. The nanofilter membrane was characterized by the contact angle, atomic force microscopy (AFM), UV–Vis, and FTIR. The results confirm the formation of r-GO nanomaterials. Higher amounts of r-GO nanomaterials in the membrane show a lower contact angle, thus confirming their hydrophilic nature. Iron water filtration was performed with different amounts of r-GO nanomaterials in the membrane filter, and the water flux was smooth over an increased time period. Inductively Coupled Plasma (ICP) analysis showed a higher percentage of iron rejection (95.77%) when higher amounts (0.10 g) of r-GO nanomaterials were used in a mixed membrane (i.e., sample C). In conclusion, the findings illustrate that Callistemon viminalis mediates the synthesis of r-GO nanomaterials, which is useful in water filtration, and can be incorporated into membrane filters, since it removes iron.

scholarly journals Chemically Cross-Linked Graphene Oxide as a Selective Layer on Electrospun Polyvinyl Alcohol Nanofiber Membrane for Nanofiltration Application

Nanomaterials ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 2867
Author(s):  
Myoung Jun Park ◽  
Grace M. Nisola ◽  
Dong Han Seo ◽  
Chen Wang ◽  
Sherub Phuntsho ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Polyvinyl Alcohol ◽  
Self Assembly ◽  
Water Flux ◽  
Composite Membranes ◽  
Cross Linking ◽  
Support Surface ◽  
Eosin Y ◽  
Selective Layer ◽  
Assembly Technique

Graphene oxide (GO) nanosheets were utilized as a selective layer on a highly porous polyvinyl alcohol (PVA) nanofiber support via a pressure-assisted self-assembly technique to synthesize composite nanofiltration membranes. The GO layer was rendered stable by cross-linking the nanosheets (GO-to-GO) and by linking them onto the support surface (GO-to-PVA) using glutaraldehyde (GA). The amounts of GO and GA deposited on the PVA substrate were varied to determine the optimum nanofiltration membrane both in terms of water flux and salt rejection performances. The successful GA cross-linking of GO interlayers and GO-PVA via acetalization was confirmed by FTIR and XPS analyses, which corroborated with other characterization results from contact angle and zeta potential measurements. Morphologies of the most effective membrane (CGOPVA-50) featured a defect-free GA cross-linked GO layer with a thickness of ~67 nm. The best solute rejections of the CGOPVA-50 membrane were 91.01% for Na2SO4 (20 mM), 98.12% for Eosin Y (10 mg/L), 76.92% for Methylene blue (10 mg/L), and 49.62% for NaCl (20 mM). These findings may provide one of the promising approaches in synthesizing mechanically stable GO-based thin-film composite membranes that are effective for solute separation via nanofiltration.

scholarly journals Biofouling Characteristics of Graphene Oxide Membrane in a Protein-rich Environment

2021 ◽  
Author(s):  
Richard P Rode ◽  
Saeed Moghaddam
Keyword(s):  
Graphene Oxide ◽  
Self Assembly ◽  
Membrane Surface ◽  
Water Flux ◽  
Polymer Membrane ◽  
Blood Protein ◽  
Separation Processes ◽  
Sem Images ◽  
Membrane Flux ◽  
Protein Rich

Membrane biofouling has inhibited permselective separation processes for decades, requiring frequent membrane backwash treatment or replacement to maintain efficacy. However, frequent treatment is not viable for devices with a continuous blood flow such as a wearable or implantable dialyzer. In this study, the biofouling characteristics of a highly hemocompatible graphene oxide (GO) membrane developed through a novel self-assembly process is studied in a protein-rich environment and compared with performance of a state-of-the-art commercial polymer membrane dialyzer. The studies are conducted in phosphate-buffered saline (PBS) environment using human serum albumin (HSA), which represents 60% of the blood protein, at the nominal blood protein concentration of 1 g L-1. Protein aggregation on the membrane surface is evaluated by monitoring the change in the membrane flux and SEM imaging. The GO membrane water flux declined only ~10% over a week-long test whereas the polymer membrane flux declined by 50% during the same period. The SEM images show that HSA primarily aggerates over the graphitic regions of nanoplatelets, away from the charged hydrophilic edges. This phenomenon leaves the open areas of the membrane formed between the nanoplatelets edges, through which the species pass, relatively intact. In contrast, HSA completely plugs the polymer membrane pores resulting in a steady decline in membrane permeability.

scholarly journals Cross-Linking With Diamine Monomers to Prepare Graphene Oxide Composite Membranes With Varying D-Spacing for Enhanced Desalination Properties

2021 ◽  
Vol 9 ◽  
Author(s):  
Hong Ju ◽  
Jinzhuo Duan ◽  
Haitong Lu ◽  
Weihui Xu
Keyword(s):  
Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
Water Flux ◽  
Covalent Bond ◽  
Composite Membranes ◽  
Rejection Rate ◽  
High Water ◽  
Cross Linking ◽  
Separation Performance ◽  
X Ray

As a new type of membrane material, graphene oxide (GO) can easily form sub-nanometer interlayer channels, which can effectively screen salt ions. The composite membrane and structure with a high water flux and good ion rejection rate were compared by the cross-linking of GO with three different diamine monomers: ethylenediamine (EDA), urea (UR), and p-phenylenediamine (PPD). X-ray photoelectron spectroscopy (XPS) results showed that unmodified GO mainly comprises π-π interactions and hydrogen bonds, but after crosslinking with diamine, both GO and mixed cellulose (MCE) membranes are chemically bonded to the diamine. The GO-UR/MCE membrane achieved a water flux similar to the original GO membrane, while the water flux of GO-PPD/MCE and GO-EDA/MCE dropped. X-ray diffraction results demonstrated that the covalent bond between GO and diamine can effectively inhibit the extension of d-spacing during the transition between dry and wet states. The separation performance of the GO-UR/MCE membrane was the best. GO-PPD/MCE had the largest contact angle and the worst hydrophilicity, but its water flux was still greater than GO-EDA/MCE. This result indicated that the introduction of different functional groups during the diamine monomer cross-linking of GO caused some changes in the performance structure of the membrane.

scholarly journals The Modification of PVDF Membrane via Crosslinking with Chitosan and Glutaraldehyde as the Crosslinking Agent

2018 ◽  
Vol 18 (1) ◽  
pp. 1
Author(s):  
Romaya Sitha Silitonga ◽  
Nurul Widiastuti ◽  
Juhana Jaafar ◽  
Ahmad Fauzi Ismail ◽  
Muhammad Nidzhom Zainol Abidin ◽  
...  
Keyword(s):  
Contact Angle ◽  
Vinylidene Fluoride ◽  
Membrane Surface ◽  
Pure Water ◽  
Water Flux ◽  
Crosslinking Agent ◽  
Hydrophobic Properties ◽  
Pvdf Membrane ◽  
Pure Water Flux ◽  
Modified Membrane

Poly(vinylidene fluoride) (PVDF) has outstanding properties such as high thermal stability, resistance to acid solvents and good mechanical strength. Due to its properties, PVDF is widely used as a membrane matrix. However, PVDF membrane is hydrophobic properties, so as for specific applications, the surface of membrane needs to be modified to become hydrophilic. This research aims to modify PVDF membrane surface with chitosan and glutaraldehyde as a crosslinker agent. The FTIR spectra showed that the modified membrane has a peak at 1655 cm-1, indicating the imine group (–N=C)- that was formed due to the crosslink between amine group from chitosan and aldehyde group from glutaraldehyde. Results showed that the contact angle of the modified membrane decreases to 77.22° indicated that the membrane hydrophilic properties (< 90°) were enhanced. Prior to the modification, the contact angle of the PVDF membrane was 90.24°, which shows hydrophobic properties (> 90°). The results of porosity, Ɛ (%) for unmodified PVDF membrane was 55.39%, while the modified PVDF membrane has a porosity of 81.99%. Similarly, by modifying the PVDF membrane, pure water flux increased from 0.9867 L/m2h to 1.1253 L/m2h. The enhancement of porosity and pure water flux for the modified PVDF membrane was due to the improved surface hydrophilicity of PVDF membrane.

Chelation Assembly of Cellulose Nanohydrogel onto Flower-Like Structured Foam with Underwater Superoleophobicity for Highly Efficient Oil–Water Separation

NANO ◽  
2021 ◽  
pp. 2150061
Author(s):  
Yuntian Wan ◽  
Xue Lin ◽  
Zhongshuai Chang ◽  
Xiaohui Dai ◽  
Jiangdong Dai
Keyword(s):  
Water Flux ◽  
Separation Performance ◽  
Layer By Layer ◽  
Potential Candidate ◽  
Oily Wastewater ◽  
Water Separation ◽  
Composite Foam ◽  
Oil Water Separation ◽  
Oil Water ◽  
Underwater Superoleophobicity

Currently, with the increasingly serious pollution problem of oily wastewater, it is urgent to develop advanced materials and methods. In this work, a Fe(III)-CMC@Ni(OH)2@Ni composite foam with superhydrophilic and underwater superoleophobicity was fabricated by an in situ growth of flower-like Ni(OH)2 nanoparticles and chelated assembly of Fe(III)-CMC nanohydrogel via a layer-by-layer self assembly using Fe[Formula: see text] ion and carboxymethyl cellulose (CMC). The composite foam could separate various oil/water mixtures and exhibited excellent efficiency over 99%. This foam possessed ultrahigh water flux (220000[Formula: see text]L m[Formula: see text] h[Formula: see text] and better resistant to penetration pressure (1.3[Formula: see text]kPa). After 30 cycles, the oil–water separation performance reduced only 0.5%, but the foam structure was still stable that guarantees a better lifetime. Besides, this composite foam showed anti-fouling, unique durability and excellent corrosion resistance performance. Taking into account all good properties, Fe(III)-CMC@Ni(OH)2@Ni composite foam was expected to be a potential candidate for responding to all kinds of complex oily wastewater conditions.

Preparation and Characterization of Hydrophilic PVDF Membrane via Graft Modification by Maleic Anhydride

2011 ◽  
Vol 295-297 ◽  
pp. 286-291
Author(s):  
Li Guo Wang ◽  
Xiao Guang Zhang ◽  
Shu Fang Hou ◽  
Xiu Ju Wang ◽  
Ai Min Wang ◽  
...  
Keyword(s):  
Maleic Anhydride ◽  
Polyvinylidene Fluoride ◽  
Pure Water ◽  
Water Flux ◽  
Pvdf Membrane ◽  
Technical Parameters ◽  
Pure Water Flux ◽  
Flat Membranes ◽  
Better Than

Hydrophilic polyvinylidene fluoride (PVDF) flat ultrafiltration membranes were prepared by wet-spinning method. The effects of technical parameters of maleic anhydride grafted onto PVDF on the performance of hydrophilic PVDF membranes were investigated, the preparation technical parameters were determined, and the hydrophilic PVDF flat membranes were prepared. Then, hydrophilic PVDF membranes were characterized in terms of pure water flux, contact angle, infrared spectroscopic analysis and scanning electron microscope(SEM). The results showed that maleic anhydride had been grafted onto PVDF, and the hydrophilic performance of the modified membrane was better than the traditional one.

Sign in / Sign up

Export Citation Format

Share Document