Investigation on the tribological behavior of tool-sided tailored surfaces for controlling the material flow in sheet-bulk metal forming

2019 ◽  
Author(s):  
J. Henneberg ◽  
H. Lucas ◽  
B. Denkena ◽  
M. Merklein
Keyword(s):  
Metal Forming ◽  
Material Flow ◽  
Tribological Behavior ◽  
Bulk Metal ◽  
Bulk Metal Forming ◽  
Tailored Surfaces

Analysis of Effectiveness of Locally Adapted Tribological Conditions for Improving Product Quality in Sheet-Bulk Metal Forming

2015 ◽  
Vol 794 ◽  
pp. 81-88 ◽  
Author(s):  
Maria Löffler ◽  
Daniel Groebel ◽  
Ulf Engel ◽  
Kolja Andreas ◽  
Marion Merklein
Keyword(s):  
Metal Forming ◽  
Material Flow ◽  
Operating Time ◽  
Wear Behaviour ◽  
Bulk Metal ◽  
Bulk Metal Forming ◽  
Geometrical Features ◽  
Tailored Surfaces ◽  
Economic Developments ◽  
Functional Components

Due to current ecological and economic developments there is a growing demand for functional components with complex and closely tolerated geometrical features. Conventional sheet and bulk metal forming operations leads to products which are often limited in their geometrical and functional variety. A promising approach is the process-class sheet-bulk metal forming (SBMF). SBMF is characterised by the application of bulk and sheet forming operations on sheet metals [1]. This combination leads to locally and temporally varying load conditions regarding stress as well as strain states. In order to get high quality parts, controlling the material flow is of major importance. Modified Surfaces, so-called tailored surfaces represent an innovative approach to control the material flow. The objective of the current study is the experimental investigation of the effectiveness of locally adapted tribological conditions using workpiece-and tool-sided tailored surfaces within SBMF processes. The study has shown that the local adaption of workpiece and tool surface increased the heights of functional elements. Thus, using locally adapted tribological conditions leads to an improvement of the quality of the produced gearing components. In a further step the influence of surface modifications on the surface properties of the manufactured components are analysed. Additionally, investigations regarding the wear behaviour of tool-sided surface adaptions lead to the assumption, that the effectiveness of tailored surfaces is reduced during the operating time of the tools.

Fundamental investigations on the material flow at combined sheet and bulk metal forming processes

CIRP Annals ◽  
2011 ◽  
Vol 60 (1) ◽  
pp. 283-286 ◽  
Author(s):  
M. Merklein ◽  
J. Koch ◽  
S. Opel ◽  
T. Schneider
Keyword(s):  
Metal Forming ◽  
Material Flow ◽  
Bulk Metal ◽  
Bulk Metal Forming

scholarly journals Material flow control in sheet-bulk metal forming processes using blasted tool surfaces

2018 ◽  
Vol 190 ◽  
pp. 13003 ◽  
Author(s):  
Marion Merklein ◽  
Maria Löffler ◽  
Daniel Gröbel ◽  
Johannes Henneberg
Keyword(s):  
Metal Forming ◽  
Material Flow ◽  
Simultaneous Occurrence ◽  
Tribological Behaviour ◽  
Forming Process ◽  
Functional Elements ◽  
Bulk Metal ◽  
Bulk Metal Forming ◽  
Main Challenge ◽  
Functional Components

Highly-integrated and closely-tolerated functional components can be produced by sheet-bulk metal forming which is the application of bulk forming operations on sheet metals. These processes are characterized by a successive and/or simultaneous occurrence of different load conditions such as stress and strain states which reduce the geometrical accuracy of the functional elements. Thus, one main challenge within sheet-bulk metal forming is the identification of methods to control the material flow and thus to improve the product quality. One suitable approach is to control the material flow by local modifications of the tribological conditions. Within this study requirements regarding the needed adaption of the tribological conditions for a specific sheet-bulk metal forming process were defined by numerical investigations. The results reveal that a local increase of the friction leads to an improved die filling of the functional elements. Based on these results abrasive blasting as a method to modify the tool surface and thus influencing the tribological behaviour was investigated. For the determination of the tribological mechanism of blasted tool surfaces, the influence of different blasting media as well as blasting pressures on the surface integrity and the friction were determined. The correlations between surface properties and friction conditions were used to derive the mechanisms of blasted tool surfaces.

scholarly journals Investigation on blasted tool surfaces as a measure for material flow control in sheet-bulk metal forming

2019 ◽  
Vol 6 ◽  
pp. 10 ◽  
Author(s):  
Marion Merklein ◽  
Maria Löffler ◽  
Daniel Gröbel ◽  
Johannes Henneberg
Keyword(s):  
Metal Forming ◽  
Material Flow ◽  
Simultaneous Occurrence ◽  
Tribological Behaviour ◽  
Bulk Metal ◽  
Geometrical Accuracy ◽  
Bulk Metal Forming ◽  
Tribological System ◽  
Local Modification ◽  
Functional Components

Highly integrated and closely tolerated functional components can be produced by sheet-bulk metal forming which is the application of bulk forming operations on sheet metal. These processes are characterized by a successive and/or simultaneous occurrence of different load conditions which reduce the geometrical accuracy of the parts. One challenge within sheet-bulk metal forming is the identification of methods to control the material flow to improve the product quality. A suitable approach is the local modification of the tribological conditions. Within this study, requirements regarding the needed adaption of the tribological system for a specific process were defined by numerical investigations. The results reveal that a local increase of the friction leads to an improved geometrical accuracy. Based on these results, abrasive blasting as a method to modify the tool surface and thus influencing the tribological behaviour was investigated. For the determination of the tribological mechanism of blasted tool surfaces, the influence of different blasting media as well as blasting pressures on the surface integrity and the friction were determined. Additionally, the functional stability of a modification was investigated. Finally, the correlations between surface properties and friction conditions were used to derive the mechanisms of blasted tool surfaces.

scholarly journals Controlling material flow in incremental sheet-bulk metal Forming by thermal grading

2020 ◽  
Vol 50 ◽  
pp. 257-264
Author(s):  
Sebastian Wernicke ◽  
Ulrich Thier ◽  
Marlon Hahn ◽  
Erman Tekkaya
Keyword(s):  
Metal Forming ◽  
Material Flow ◽  
Bulk Metal ◽  
Bulk Metal Forming

scholarly journals Innovative approaches for controlling the material flow in sheet-bulk metal forming processes

2016 ◽  
Vol 3 ◽  
pp. 2 ◽  
Author(s):  
Marion Merklein ◽  
Michael Lechner ◽  
Daniel Gröbel ◽  
Maria Löffler ◽  
Thomas Schneider ◽  
...  
Keyword(s):  
Metal Forming ◽  
Material Flow ◽  
Bulk Metal ◽  
Bulk Metal Forming ◽  
Innovative Approaches

Improved Sheet Bulk Metal Forming Processes by Local Adjustment of Tribological Properties

2011 ◽  
Vol 133 (6) ◽  
Author(s):  
H. Hetzner ◽  
J. Koch ◽  
S. Tremmel ◽  
S. Wartzack ◽  
M. Merklein
Keyword(s):  
Contact Pressure ◽  
Metal Forming ◽  
Material Flow ◽  
System Analysis ◽  
Sheet Thickness ◽  
Fe Model ◽  
Forming Process ◽  
Bulk Metal ◽  
Bulk Metal Forming ◽  
Functional Features

This paper is focused on a combined deep drawing and extrusion process dedicated to the new process class of sheet bulk metal forming (SBMF). Exemplified by the forming of gearings, combined sheet and bulk forming operations are applied to sheet metal in order to form local functional features through an intended and controlled change of the sheet thickness. For investigations on the form filling and the identification of significant influencing factors on the material flow, a FE simulation model has been built. The FE model is validated by the results of manufacturing experiments using DC04 with a thickness of 2.0 mm as blank material. Due to the fact that the workpiece is in extensive contact to the tool surface and that the pressure reaches locally up to 2500 MPa, the tribological conditions are a determining factor of the process. Thus, their influence is discussed in detail in this paper. In the first instance, different frictional zones having a distinct effect on the resulting material flow are identified and their effect on improved form filling is demonstrated. Subsequently, a more comprehensive methodology is developed to define tribological zones of forming tools. For this, a system analysis of the digital mock-up of the forming process is performed. Besides friction, other relevant aspects of forming tool tribology like contact pressure, sliding velocity, and surface magnification are considered. The gathered information is employed to partition the tools into tribological zones. This is done by systematically intersecting and re-merging zones identified for each of the criterion. The so-called load-scanning test allows the investigation of the friction coefficient in dependence of the contact pressure and possible loading limits of tribological pairings. It provides an appropriate tribological model test to evaluate tribological measures like coatings, surface textures and lubricants with respect to their targeted application in particular zones. The obtained results can be employed in the layout of further forming processes to reach the desired process behavior. This can be, for example, an improved form filling, less abrasive wear and adhesive damage or lower forming forces, respectively tool load for an improved durability of the die.

scholarly journals Extension of the forming limits of extrusion processes in sheet-bulk metal forming for production of minute functional elements

2020 ◽  
Vol 7 ◽  
pp. 9 ◽  
Author(s):  
Florian Pilz ◽  
Johannes Henneberg ◽  
Marion Merklein
Keyword(s):  
Sheet Metal ◽  
Metal Forming ◽  
Extrusion Process ◽  
Process Conditions ◽  
Functional Elements ◽  
Bulk Metal ◽  
Bulk Metal Forming ◽  
Lateral Extrusion ◽  
Component Design ◽  
Tailored Surfaces

Increasing demands in modern production pose new challenges to established forming processes. One approach to meet these challenges is the combined use of established process classes such as sheet and bulk forming. This innovative process class, also called sheet-bulk metal forming (SBMF), facilitates the forming of minute functional elements such as lock toothing and gear toothing on sheet-metal bodies. High tool loads and a complex material flow that is hard to control are characteristic of SBMF. Due to these challenging process conditions, the forming of functional elements is often insufficient and necessitates rework. This negatively affects economic efficiency. In order to make use of SBMF in industrial contexts, it is necessary to develop measures for improving the forming of functional elements and thereby push existing forming boundaries. This paper describes the design and numerical replication of both a forward and a lateral extrusion process so as to create involute gearing in combination with carrier teeth. In a combined numerical-experimental approach, measures for extending the die filling in sheet-metal extrusion processes are identified and investigated. Here, the focus is on approaches such as process parameters, component design and locally adjusted tribological conditions; so-called ‘tailored surfaces’. Based on the findings, fundamental mechanisms of action are identified, and measures are assessed with regard to their potential for application. The examined approaches show their potential for improving the forming of functional elements and, consequently, the improvement of geometrical accuracies in functional areas of the workpieces.

Control of the material flow in sheet-bulk metal forming using modifications of the tool surface

2018 ◽  
Vol 12 (1) ◽  
pp. 17-26 ◽  
Author(s):  
Maria Löffler ◽  
R. Schulte ◽  
D. Freiburg ◽  
D. Biermann ◽  
D. Stangier ◽  
...  
Keyword(s):  
Metal Forming ◽  
Material Flow ◽  
Bulk Metal ◽  
Bulk Metal Forming ◽  
Tool Surface

Influence of Surface Modifications on Friction, Using High-Feed Milling and Wear Resistant PVD-Coating for Sheet-Metal Forming Tools

2015 ◽  
Vol 639 ◽  
pp. 275-282 ◽  
Author(s):  
Dirk Biermann ◽  
Dennis Freiburg ◽  
Rouven Hense ◽  
Wolfgang Tillmann ◽  
Dominic Stangier
Keyword(s):  
Metal Forming ◽  
Material Flow ◽  
Functional Integration ◽  
Work Piece ◽  
Efficient Production ◽  
Bulk Metal ◽  
Wear Resistant ◽  
Structured Surfaces ◽  
Bulk Metal Forming ◽  
High Feed

Increasing technological requirements, as well as the demand for an efficient production demands high performance materials and enhanced manufacturing processes. The development of a new manufacturing process, sheet-bulk metal forming (SBMF), is one approach to produce lightweight forming parts with an increased number of functional properties while, at the same time, combining the advantages of sheet and bulk metal forming. For SBMF processes, the specific adjustment of the friction between tool and workpiece for a specifically designed material flow, which is called tailored friction, is of great importance. The reduction of friction is essential in order to ensure a homogeneous forming zone. However, a higher friction can be used to control the material flow to increase the local thickness of the work piece for additional functional integration. This paper shows the development of surface structures for SBMF tools by means of high-feed milling. Process parameters like the tilt angle or the feed are varied to influence the surface parameters of the structures, which results in different tribological properties of the forming tool. The structured surfaces are subsequently coated with a wear resistant CrAlN coating, processed by a magnetron-sputtering process (PVD) to enhance the lifetime and performance of the forming tool. Finally, a ring compressing test is used to investigate the tribological behavior of the coated structures.

Sign in / Sign up

Export Citation Format

Share Document