scholarly journals Magnetohydrodynamic flow of viscous fluid between two parallel porous plates with bottom injection and top suction subjected to an inclined magnetic field

2019 ◽  
Author(s):  
P. Chandrasekar ◽  
S. Ganesh ◽  
A. Mohamed Ismail ◽  
V. W. J. Anand
Keyword(s):  
Magnetic Field ◽  
Viscous Fluid ◽  
Magnetohydrodynamic Flow ◽  
Inclined Magnetic Field ◽  
Bottom Injection

scholarly journals Magnetohydro Dynamic Steady Flow Between Two Parallel Porous Plates of a Viscous Fluid Under Angular Velocity with Inclined Magnetic Field

2019 ◽  
Vol 8 (4) ◽  
pp. 615-619
Keyword(s):  
Magnetic Field ◽  
Reynolds Number ◽  
Angular Velocity ◽  
Viscous Fluid ◽  
Inclined Magnetic Field ◽  
Fluid Stream ◽  
Course Of Action ◽  
Game Plan ◽  
Differential Condition ◽  
Comparative Rate

The Model is made as the Steady Magnetohydro dynamic streams with an exact speed between parallel penetrable plates are considered. The issue is seen methodically by using comparability change, whose game plan oversees growing fluid stream with a dashing velocity. The Major Applications of Magnetohydro dynamic (MHD) are the controller of generators, the system containing Cooling and thermal structures, improvement of polymer, Fuel industries etc. The objective of this paper is to look at the Steady Magnetohydro dynamic stream of thick fluid with a saucy speed between parallel porous plates when the fluid forced to their back position by the way of the dividers of each partition at a comparative rate. The issue is decreased to a third solicitation direct differential condition which depends upon a Suction Reynolds number R and M1 for which a right course of action is gotten.

scholarly journals Magnetohydrodynamic Flow of Viscous Fluid in a Slot between Fixed Surfaces of Revolution

2017 ◽  
Vol 24 (3) ◽  
pp. 78-85
Author(s):  
Jerzy Sawicki
Keyword(s):  
Magnetic Field ◽  
Boundary Layer ◽  
Viscous Fluid ◽  
Magnetohydrodynamic Flow ◽  
Parameter Method ◽  
Curvilinear Coordinate System ◽  
Surfaces Of Revolution ◽  
Small Parameter Method ◽  
Azimuthal Magnetic Field ◽  
Curvilinear Coordinate

Abstract The paper considers stationary magnetohydrodynamic flow of viscous fluid in the slot between fixed curvilinear surfaces of revolution exposed to azimuthal magnetic field. To solve the problem, the equations of boundary layer in the curvilinear coordinate system. x,θ,y, were applied. The equations of the boundary layer were solved analytically with the use of the small-parameter method. The formulas determine the field of velocity and pressure.

scholarly journals Jet Impingement Heat Transfer of Confined Single and Double Jets with Non-Newtonian Power Law Nanofluid under the Inclined Magnetic Field Effects for a Partly Curved Heated Wall

2021 ◽  
Vol 13 (9) ◽  
pp. 5086
Author(s):  
Fatih Selimefendigil ◽  
Hakan F. Oztop ◽  
Ali J. Chamkha
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Particle Size ◽  
Aspect Ratio ◽  
Power Law ◽  
Volume Fraction ◽  
Inclined Magnetic Field ◽  
Magnetic Field Effects ◽  
Power Law Nanofluid ◽  
Power Law Index

Single and double impinging jets heat transfer of non-Newtonian power law nanofluid on a partly curved surface under the inclined magnetic field effects is analyzed with finite element method. The numerical work is performed for various values of Reynolds number (Re, between 100 and 300), Hartmann number (Ha, between 0 and 10), magnetic field inclination (γ, between 0 and 90), curved wall aspect ratio (AR, between 01. and 1.2), power law index (n, between 0.8 and 1.2), nanoparticle volume fraction (ϕ, between 0 and 0.04) and particle size in nm (dp, between 20 and 80). The amount of rise in average Nusselt (Nu) number with Re number depends upon the power law index while the discrepancy between the Newtonian fluid case becomes higher with higher values of power law indices. As compared to case with n = 1, discrepancy in the average Nu number are obtained as −38% and 71.5% for cases with n = 0.8 and n = 1.2. The magnetic field strength and inclination can be used to control the size and number or vortices. As magnetic field is imposed at the higher strength, the average Nu reduces by about 26.6% and 7.5% for single and double jets with n greater than 1 while it increases by about 4.78% and 12.58% with n less than 1. The inclination of magnetic field also plays an important role on the amount of enhancement in the average Nu number for different n values. The aspect ratio of the curved wall affects the flow field slightly while the average Nu variation becomes 5%. Average Nu number increases with higher solid particle volume fraction and with smaller particle size. At the highest particle size, it is increased by about 14%. There is 7% variation in the average Nu number when cases with lowest and highest particle size are compared. Finally, convective heat transfer performance modeling with four inputs and one output is successfully obtained by using Adaptive Neuro-Fuzzy Interface System (ANFIS) which provides fast and accurate prediction results.

Sign in / Sign up

Export Citation Format

Share Document